Cover Image

Computerized inspection of gear tooth surfaces /

Bibliographic Details
Corporate Authors:	United States. National Aeronautics and Space Administration, United States. Army Aviation Systems Command
Other Authors:	Litvin, F. L. (Faydor L.)
Format:	Government Document Microform Book
Language:	English
Published:	[Washington, D.C.] : [St. Louis, Mo.] : National Aeronautics and Space Administration ; US Army Aviation Systems Command ; [1989?]
Series:	AVSCOM technical report ; 89-C-011. NASA technical memorandum ; 102395.
Subjects:	Computer aided manufacturing. Correction. Gear teeth. Inspection. Machine tools. Mathematical models. Numerical control. Surface properties.
Online Access:	https://purl.fdlp.gov/GPO/LPS61914

Similar Items

Determination of real machine-tool settings and minimization of real surface deviation by computerized inspection /
by: Litvin, F. L. (Faydor L.)
Published: (1991)

Computer simulation of gear tooth manufacturing processes /
by: Mavriplis, Dimitri
Published: (1990)

Seeding cracks using a fatigue tester for accelerated gear tooth breaking /
Published: (2011)

Topology of modified helical gears /
Published: (1989)

Computerized generation and simulation of meshing of modified spur and helical gears manufactured by shaving /
Published: (2001)

Gear tooth wear detection algorithm / Irebert R. Delgado.
by: Delgado, Irebert R.
Published: (2015)

Engagement of metal debris into a gear mesh /
by: Handschuh, Robert F.
Published: (2010)

Balancing dynamic strength of spur gears operated at extended center distance /
by: Lin, Hsiang Hsi
Published: (1996)

A basis for solid modeling of gear teeth with application in design and manufacture /
Published: (1992)

Generation and tooth contact analysis of spiral bevel gears with predesigned parabolic functions of transmission errors /
by: Litvin, F. L. (Faydor L.)
Published: (1989)

Measurement of gear tooth dynamic friction /
by: Rebbechi, Brian, et al.
Published: (1996)

Investigation of sideband index response to prototype gear tooth damage /
by: Dempsey, Paula J.
Published: (2013)

Surface pitting fatigue life of noninvolute, low-contact-ratio gears /
by: Townsend, Dennis P.
Published: (1990)

Influence of linear profile modification and loading conditions on the dynamic tooth load and stress of high contact ration gears /
Published: (1990)

Non-linear dynamic analysis of geared systems.
by: Singh, Rajendra
Published: (1990)

Design, generation and tooth contact analysis (TCA) of asymmetric face gear drive with modified geometry /
by: Litvin, F. L. (Faydor L.)
Published: (2001)

Computerized design and analysis of face-milled, uniform tooth height, spiral bevel gear drives /
by: Litvin, F. L. (Faydor L.), et al.
Published: (1996)

Vibration and operational characteristics of a composite-steel (hybrid) gear /
by: Handschuh, Robert F.
Published: (2014)

An experimental investigation of the influence of the lubricant viscosity and additives on gear wear /
by: Krantz, T. L. (Timothy L.)
Published: (2005)

Design, generation and tooth contact analysis (TCA) of asymmetric face gear drive with modified geometry /
Published: (2001)

A new high-speed, high-cycle, gear-tooth bending fatigue test capability /
Published: (2011)

Tribological evaluation of candidate gear materials operating under light loads in highly humid conditions /
by: DellaCorte, Christopher, et al.
Published: (2015)

Gearing /
by: Coy, John J.
Published: (1985)

Investigation of spiral bevel gear condition indicator validation via AC-29-2C using damage progression tests /
by: Dempsey, Paula J.
Published: (2014)

Computerized design and generation of gear drives with a localized bearing contact and a low level of transmission errors /
by: Litvin, F. L. (Faydor L.)
Published: (1996)

Evaluation of carburized and ground face gears /
Published: (1999)

Planetary gearbox fault detection using vibration separation techniques /
Published: (2011)

Evaluation of MEMS-based wireless accelerometer sensors in detecting gear tooth faults in helicopter transmissions /
by: Lewicki, David G., et al.
Published: (2015)

Vibration propagation of gear dynamics in a gear-bearing-housing system using mathematical modeling and finite element analysis /
by: Parker, Robert G
Published: (2012)

Gear and transmission research at NASA Lewis Research Center /
by: Townsend, Dennis P.
Published: (1997)

Advanced face gear surface durability evaluations /
by: Lewicki, David G., et al.
Published: (2016)

Effects of planetary gear ratio on mean service life /
by: Savage, M., et al.
Published: (1996)

A computational investigation of gear windage /
by: Hill, Matthew J., et al.
Published: (2012)

Contact and bending durability calculation for spiral-bevel gears /
by: Vijayakar, Sandeep
Published: (2016)

Continued evaluation of gear condition indicator performance on rotorcraft fleet /
by: Delgado, Irebert R.
Published: (2013)

High pressure angle gears : preliminary testing results /
by: Handschuh, Robert F.
Published: (2010)

Wear of spur gears having a dithering motion and lubricated with a perfluorinated polyether grease /
by: Krantz, Timothy
Published: (2007)

Straddle design of spiral bevel and hypoid pinions and gears /
by: Litvin, F. L. (Faydor L.)
Published: (1990)

Helical face gear development under the Enhanced Rotorcraft Drive System Program /
Published: (2011)

Laser metrology and machine performance III /
Published: (1997)