Cover Image

Tribological properties of PM212 : a high-temperature, self-lubricating, powder metallurgy composite /

Bibliographic Details
Main Author:	DellaCorte, Christopher
Corporate Author:	Lewis Research Center
Other Authors:	Sliney, Harold E.
Format:	Government Document Book
Language:	English
Published:	Cleveland, Ohio : Lewis Research Center, [1989]
Series:	NASA technical memorandum ; 102355.
Subjects:	Eutectic composites. Metal powder. Powder metallurgy. Refractory materials. Self lubricating materials. Tribology. Wear tests.
Online Access:	https://purl.fdlp.gov/GPO/LPS58491

Similar Items

Tribological properties of ceramic/Ti₃Al-Nb sliding couples for use as candidate seal materials to 700 ⁰C /
by: DellaCorte, Christopher
Published: (1990)

Mechanical strength and thermophysical properties of PM212 : a high temperature self-lubricating powder metallurgy composite /
Published: (1990)

The effect of compositional tailoring on the thermal expansion and tribological properties of PS300 : a solid lubricant composite coating /
by: DellaCorte, Christopher, et al.
Published: (1996)

Experimentally determined wear behavior of an Al2O3-SiC composite from 25 to 1200 ̊C /
by: DellaCorte, Christopher
Published: (1990)

High temperature solid lubricant materials for heavy duty and advanced heat engines /
by: DellaCorte, Christopher
Published: (1994)

Consolidation processing parameters and alternative processing methods for powder metallurgy A1-Cu-Mg-X-X alloys : final report /
by: Sankaran, K. K.
Published: (1987)

Self-lubricating polymer composites and polymer transfer film lubrication for space applications /
by: Fusaro, Robert L.
Published: (1990)

Effectiveness of diffusion barrier coatings for Mo-Re embedded in C/SiC and C/C /
Published: (2001)

Tribological properties of polymer films and solid bodies in a vacuum environment /
by: Fusaro, Robert L.
Published: (1987)

Tribological properties of polymer films and solid bodies in a vacuum environment /
by: Fusaro, Robert L.
Published: (1987)

Retention of compressive residual stresses introduced by shot peening in a powder metal disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2016)

Tribological performance of PM400 bushings in oscillatory sliding from 25 to 927° C /
by: DellaCorte, Christopher, et al.
Published: (2019)

The effect of composition on the surface finish of PS400 : a new high temperature solid lubricant coating /
Published: (2010)

Near-net shape powder metallurgy rhenium thruster /
by: Leonhardt, Todd A.
Published: (2001)

Near-net shape powder metallurgy rhenium thruster /
Published: (2001)

Phase I report on space station long term lubrication analysis.
Published: (1990)

Polyimide fibers /
Published: (1996)

A systems approach to the solid lubrication of foil air bearings for oil-free turbomachinery /
by: DellaCorte, Christopher
Published: (2002)

Effects of long term exposures on PM disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2013)

Tribological evaluation of PS300 : a new chrome oxide based solid lubricant coating sliding against A1₂O₃ from 25 to 650°C /
by: DellaCorte, Christopher, et al.
Published: (1996)

Tribological evaluation of candidate gear materials operating under light loads in highly humid conditions /
by: DellaCorte, Christopher, et al.
Published: (2015)

NASA PS400 : a new high temperature solid lubricant coating for high temperature wear applications /
by: DellaCorte, C.
Published: (2009)

Effect of notches on creep-fatigue behavior of a P/M nickel-based superalloy /
by: Telesman, Jack
Published: (2015)

The role of silver in self-lubricating coatings for use at extreme temperatures /
by: Sliney, Harold E.
Published: (1985)

Tribology : the story of lubrication and wear /
Published: (1985)

Tribology experiment in zero gravity /
by: Pan, C. H. T. (Coda H. T.)
Published: (2015)

Fundamental aspects of polyimide dry film and composite lubrication : a review /
by: Fusaro, Robert L.
Published: (1982)

Characterization of the temperature capabilities of advanced disk alloy ME3 /
Published: (2002)

Development of tough, strong, and pest-resistant MoSi₂-βSi₃N₄ composites for high-temperature structural applications /
Published: (2001)

The effectiveness of a NiCrY-coating on a powder metallurgy disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2018)

Studies of mechano-chemical interactions in the tribological behavior of materials /
by: Miyoshi, Kazuhisa
Published: (1990)

Fatigue life of a NiCr-coated powder metallurgy disk superalloy after varied processing and exposures /
by: Gabb, Timothy P.
Published: (2018)

METCAN simulation of candidate metal matrix composites for high temperature applications /
by: Lee, Ho-Jun
Published: (1990)

A systems approach to the solid lubrication of foil air bearings for oil-free turbomachinery /
by: DellaCorte, Christopher, et al.
Published: (2002)

Study on effects of powder and flake chemistry and morphology on the properties of Al-Cu-Mg-X-X-X powder metallurgy advanced aluminum alloys /
Published: (1985)

The tribological properties of several silahydrocarbons for use in space mechanisms /
Published: (2001)

Competition of failure modes in an additively manufactured disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2023)

Residual stresses in a NiCrY-coated powder metallurgy disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2017)

Solid state synthesis and properties of monoclinic celsian /
by: Bansal, Narottam P.
Published: (1996)

Wear of spur gears having a dithering motion and lubricated with a perfluorinated polyether grease /
by: Krantz, Timothy
Published: (2007)