Cover Image

Dynamic response of film thickness in spiral-groove face seals /

Show other versions (1)

Bibliographic Details
Main Author:	DiRusso, Eliseo
Corporate Author:	United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch
Format:	Government Document Book
Language:	English
Published:	[Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; 1985.
Series:	NASA technical paper ; 2544.
Subjects:	Gas-lubricated bearings. Sealing (Technology) Dynamic response. Film thickness. Gas bearings. Grooves. Seals (Stoppers)
Online Access:	https://purl.fdlp.gov/GPO/LPS54398

Similar Items

Dynamic response of film thickness in spiral-groove face seals /
by: DiRusso, Eliseo
Published: (1985)

A new analysis tool assessment for rotordynamic modeling of gas foil bearings /
by: Howard, Samuel A.
Published: (2010)

SSME seal test program : test results for sawtooth-pattern damper seal : interim progress report /
by: Childs, Dara W.
Published: (1986)

Durable solid lubricant coatings for foil gas bearings to 315⁰ C /
by: Wagner, Robert C.
Published: (1984)

An experimental investigation of leak rate performance of a subscale candidate elastomer docking space seal /
by: Garafolo, Nicholas G.
Published: (2011)

Sliding seal materials for low heat rejection engines /
by: Beaty, Kevin
Published: (1989)

Experimental study of load carrying capacity of point contacts at zero entrainment velocity /
by: Shogrin, Bradley
Published: (1998)

Investigations of shuttle main landing gear door environmental seals /
Published: (2005)

SSME seal test program : test results for hole-pattern damper seals, interim progress report /
by: Childs, Dara W.
Published: (1985)

Interfaces--weak links, yet great opportunities /
Published: (2011)

Seal investigations of an active clearance control system concept /
Published: (2006)

A dynamic analysis of rotary combustion engine seals /
Published: (1984)

Remaining technical challenges and future plans for oil-free turbomachinery /
by: DellaCorte, Christopher
Published: (2010)

Performance of jet- and inner-ring-lubricated 35-millimeter-bore ball bearings operating to 2.5 million DN /
by: Schuller, Fredrick T., et al.
Published: (1981)

Effects of compression, staging, and braid angle on braided rope seal performance /
by: Steinetz, Bruce M., et al.
Published: (1997)

Computational fluid mechanics utilizing the variational principle of modeling damping seals /
Published: (1984)

Ribbon-burner simulation of the T-700 turbine shroud section for ceramic-lined seals research /
Published: (1985)

An experimental investigation of silicone-to-metal bond strength in composite space docking system seals /
by: Conrad, Mason C.
Published: (2010)

Tribological limitations in gas turbine engines : a workshop to identify the challenges and set future directions /
by: DellaCorte, Christopher
Published: (2002)

The evaluation of a modified chrome oxide based high temperature solid lubricant coating for foil gas bearings /
by: DellaCorte, Christopher
Published: (1998)

Oil-free shaft support system rotordynamics : past, present, and future challenges and opportunities /
by: DellaCorte, Christopher
Published: (2011)

Analysis of apex seal friction power loss in rotary engines /
by: Handschuh, Robert F.
Published: (2010)

On the correlation of specific film thickness and gear pitting life /
by: Krantz, T. L. (Timothy L.)
Published: (2015)

Computation of pressurized gas bearings using CE/SE method /
Published: (2003)

Bearing elastohydrodynamic lubrication : a complex calculation made simple /
by: Zaretsky, Erwin V.
Published: (1990)

Correlation of asperity contact-time fraction with elastohydrodynamic film thickness in a 20-millimeter-bore ball bearing /
by: Coy, John J.
Published: (1979)

An assessment of gas foil bearing scalability and the potential benefits to civilian turbofan engines /
by: Bruckner, Robert J.
Published: (2010)

Gas foil bearings for space propulsion nuclear electric power generation /
by: Howard, Samuel A.
Published: (2006)

Full-scale system for quantifying loads and leak rates of seals for space applications /
Published: (2010)

Experimental assessment of advanced Stirling component concepts /
by: Ziph, B.
Published: (1985)

Advanced high temperature structural seals /
Published: (2002)

Advanced high temperature structural seals /
Published: (2002)

Thermal management techniques for oil-free turbomachinery systems /
by: Radil, Kevin C., et al.
Published: (2006)

Block II solid rocket motor (SRM) conceptual design study : final report /
Published: (1986)

The role of radial clearance on the performance of foil air bearings /
by: Radil, Kevin
Published: (2002)

A new foil air bearing test rig for use to 700°C and 70,000 rpm /
by: DellaCorte, Christopher
Published: (1997)

2001 NASA Seal/Secondary Air System Workshop : proceedings of a conference held at and sponsored by NASA Glenn Research Center, Cleveland, Ohio, October 30-31, 2001.
Published: (2002)

Evaluation of an active clearance control system concept /
Published: (2005)

Bidirectional brush seals /
by: Hendricks, Robert C.
Published: (1997)

Stiffness and damping coefficient estimation of compliant surface gas bearings for oil-free turbomachinery /
by: DellaCorte, Christopher
Published: (2010)