Cover Image

Abrasion behavior of aluminum and composite skin coupons, stiffened skins, and stiffened panels representative of transport airplane structures /

Bibliographic Details
Main Author:	Jackson, Karen E.
Corporate Author:	United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch
Format:	Government Document Book
Language:	English
Published:	[Washington, D.C.] : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; 1985.
Series:	AVSCOM technical report ; 85-B-7. NASA technical paper ; 2520.
Subjects:	Airplanes > Fuselage > Testing. Aluminum compounds > Testing. Epoxy compounds > Testing. Abrasion. Aluminum. Crash landing. Graphite-epoxy composites. Panels. Runways. Skid landings. Skin (Structural member) Transport aircraft.
Online Access:	https://purl.fdlp.gov/GPO/LPS54443

Similar Items

Process development and fabrication of space station type aluminum-clad graphite epoxy struts /
by: Ring, L. R.
Published: (1990)

An examination of impact damage in glass/phenolic and aluminum honeycomb core composite panels /
by: Nettles, A. T. (Alan T.)
Published: (1990)

Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections /
by: Collins, J. Scott
Published: (1989)

737 graphite composite flight spoiler flight service evaluation : eighth report /
by: Coggeshall, Randy L.
Published: (1985)

Compression response of a sandwich fuselage keel panel with and without damage /
by: McGowan, David M., et al.
Published: (1997)

Design, optimization, and evaluation of integrally-stiffened Al-2139 panel with curved stiffeners /
Published: (2011)

Buckling and postbuckling behavior of square compression-loaded graphite-epoxy plates with circular cutouts /
by: Nemeth, Michael P.
Published: (1990)

Wheel abrasion experiment metals selection for Mars pathfinder mission /
by: Hepp, Aloysius F.
Published: (1996)

Skin/stiffener interface stresses in composite stiffened panels /
by: Wang, James Ting-Shun
Published: (1984)

Compression failure mechanisms of composite structures /
by: Hahn, H. Thomas, et al.
Published: (1986)

An approach for relating the results of quantitative nondestructive evaluation to intrinsic properties of high-performance materials : semiannual progress report : September 15, 1989 - March 14, 1990 /
by: Miller, James G.
Published: (1990)

Fatigue debonding characterization in composite skin/stringer configurations /
by: Cvitkovich, Michael, et al.
Published: (1997)

Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections /
by: Collins, J. Scott
Published: (1990)

Environmental exposure effects on composite materials for commercial aircraft /
by: Coggeshall, Randy L.
Published: (1985)

Scaling effects in the static large defelction [as printed] response of graphite-epoxy composite beams /
by: Jackson, Karen E.
Published: (1989)

Design, optimization and evaluation of integrally stiffened Al 7050 panel with curved stiffeners /
Published: (2011)

The effect of resin toughness and modulus on compressive failure modes of quasi-isotropic graphite/epoxy laminates /
by: Sohi, Mohsen M.
Published: (1986)

Fuel containment, lightning protection, and damage tolerance in large composite primary aircraft structures /
by: Griffin, C. F. (Charles Francis), 1944-, et al.
Published: (1985)

Mode II interlaminar fracture toughness and fatigue characterization of a graphite epoxy composite material /
by: O'Brien, T. Kevin
Published: (2010)

Properties of two carbon composite materials using LTM25 epoxy resin /
by: Cross, John R., et al.
Published: (1996)

Global/local stress analysis of composite panels /
by: Ransom, Jonathan B.
Published: (1989)

Fatigue damage in notched composite laminates under tension-tension cyclic loads /
Published: (1985)

Structural testing of a stitched/resin film infused graphite-epoxy wing box /
by: Jegley, Dawn C., et al.
Published: (2001)

Structural testing of a stitched/resin film infused graphite-epoxy wing box /
by: Jegley, Dawn C.
Published: (2001)

Evaluation of the behavior of Technova Corporation rod-stiffened stitched compression specimens /
by: Dawn C. Jegley
Published: (2013)

Fabrication of lower section and upper forward bulkhead panels of the multi-bay box and panel preparation : final report /
by: Velicki, Alexander
Published: (2015)

Prediction of composite laminate fracture : micromechanics and progressive fracture /
by: Gotsis, Pascal K., et al.
Published: (1996)

Buckling behavior of long anisotropic plates subjected to combined loads /
by: Nemeth, Michael P.
Published: (1996)

Thermal output of WK-type strain gauges on various materials at cryogenic and elevated temperatures /
by: Kowalkowski, Matthew K., et al.
Published: (1998)

The impact response of carbon/epoxy laminates /
by: Nettles, A. T. (Alan T.), et al.
Published: (1997)

Evaluation of pressurization fatigue life of 1441 Al-Li fuselage panel /
by: Bird, R. Keith, et al.
Published: (1999)

Material total mass loss in vacuum obtained from various outgassing systems /
by: Scialdone, John J.
Published: (2000)

A new look at numerical analyses of free-edge stresses in composite laminates /
by: Raju, I. S., et al.
Published: (1980)

Verification and application of the Iosipescu shear test method /
by: Walrath, David E.
Published: (1984)

Measurement of damping of graphite epoxy materials /
by: Crocker, Malcolm J.
Published: (1985)

Measurement of multiaxial ply strength by an off-axis flexure test /
by: Crews, John H.
Published: (1992)

Adjusting measured weight loss of aged graphite fabric/PMR-15 composites /
by: Bowles, Kenneth J.
Published: (1998)

Combining through-thickness reinforcement and self-healing for improved damage tolerance and durability of composites /
by: O'Brien, T. Kevin
Published: (2013)

Impact and penetration of thin aluminum 2024 flat panels at oblique angles of incidence /
by: Ruggeri, Charles R.
Published: (2015)

Structure-property correlations in Al-Li alloy integrally stiffened extrusions /
by: Hales, Stephen J.
Published: (2001)