High temperature creep of Ni-Base superalloys : a bibliographic guide to current technical literature, consisting of abstracts and citations drawn from the world's most comprehensive databases in the field /

Influence of rolling temperature and copper content on creep and other properties of zinc-copper and zinc-titanium-copper alloys /
by: Neumeier, L. A.
Published: (1970)

Experimental creep life assessment for the Advanced Stirling Convertor heater head /
Published: (2010)

Creep resistance of disk alloy CH98 with tungsten and niobium additions /
by: Gayda, John
Published: (2003)

Creep deformation and fracture, design, and life extension : proceedings of a symposium sponsored by Materials Science & Technology 2005 (MS&T'05) : held in Pittsburgh, Pennsylvania, USA, September 25-28, 2005 /
Published: (2005)

Tensile and creep property characterization of potential Brayton cycle impeller and duct materials /
by: Gabb, Timothy P.
Published: (2006)

Effects of microstructural parameters on creep of nickel-base superalloy single crystals /
by: MacKay, Rebecca A., et al.
Published: (2013)

Modelling fatigue damage accumulation in nickel base superalloys : final report /
by: Berkovits, Avraham
Published: (1992)

Creep of zirconium alloys in nuclear reactors /
by: Franklin, D. G.
Published: (1983)

Development of constitutive models for cyclic plasticity and creep behavior of super alloys at high temperature : final report /
by: Haisler, Walter E.
Published: (1983)

Metallic creep and creep resistant alloys.
by: Sully, Arthur Henry, 1914-
Published: (1949)

Creep-rupture data for the refractory metals to high temperatures /
by: Conway, Joseph B.
Published: (1971)

Fundamentals of creep in metals and alloys /
by: Kassner, Michael Ernest
Published: (2009)

Structural benchmark creep testing for Microcast MarM-247 advanced Stirling converter E2 heater head test article SN18 /
by: Krause, David L., et al.
Published: (2013)

A convenient representation of creep strain data for problems involving time-varying stresses and temperatures /
by: Clarke, John Michael, 1937-
Published: (1967)

High temperature oxidation and hot corrosion of nickel and cobalt based superalloys = Oxydation á haute température et corrosion á chaud des superalliages á base de nickel et de cobalt /
by: Patnaik, P. C.
Published: (1985)

Experience with creep-strength enhanced ferritic steels and new emerging computational methods : presented at the 2004 ASME/JSME Pressure Vessels and Piping Conference : San Diego, California, USA, July 25-29, 2004 /
Published: (2004)

Effects of minor alloying additions on the microstructure, toughness, and creep strength of directionally solidified NiAl-31Cr-3Mo /
Published: (2001)

Alloy design challenge : development of low density superalloys for turbine blade applications /
Published: (2009)

A comparative study of extrapolation methods for creep data at small strains /
by: Levy, John Court, 1926-
Published: (1969)

Elevated temperature tension, compression, and creep-rupture behavior of [001]-oriented single crystal superalloy PWA 1480 /
by: Hebsur, Mohan G.
Published: (1987)

Creep of metals and alloys /
by: Evans, R. W.
Published: (1985)

Nickel base single crystals across length scales /
Published: (2021)

Realistic subscale evaluations of the mechanical properties of advanced disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2003)

Thermoviscoplastic response of Ti-15-3 under various loading conditions /
by: Tuttle, M. E.
Published: (1991)

Superalloys 718, 625, 706 and various derivatives : proceedings of the International Symposium on Superalloys 718, 625, 706 and Various Derivatives : held October 2-5, 2005 /
Published: (2005)

Effects of cobalt in nickel-base superalloys /
by: Tien, John K., et al.
Published: (1983)

Realistic subscale evaluations of the mechanical properties of advanced disk superalloys /
Published: (2003)

Nickel alloy, corrosion and heat-resistant, sheet, strip, foil and plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe : consumable electrode remelted or vacuum induction melted 1775°F (968°C) solution heat treated (composition similar to UNS N07718).
Published: (2017)

Superalloys 718, 625, 706 and various derivatives : proceedings of the International Symposium on Superalloys 718, 625, 706 and Various Derivatives sponsored by the Minerals, Metals & Materials Society and cosponsored by ASM International and National Association of Corrosion Engineers, held June 26-29, 1994 /
Published: (1994)

Evaluations of the elevated temperature tensile and creep-rupture properties of C-Mo, Mn-Mo and Mn-Mo-Ni steels /
by: Smith, G. V. (George V.), 1916-
Published: (1971)

Temperature dependence of dynamic Young's modulus and internal friction in three plasma sprayed NiCrAlY coating alloys /
by: Cook, Lloyd Steven, 1963-
Published: (1989)

Anisotropy of high temperature strength in precipitation-hardened nickel-base superalloy single crystals /
Published: (1986)

High-performance, nickel-containing connector alloys /
by: Emley, Frank
Published: (1991)

10 000-hour cyclic oxidation behavior at 982 °C (1800 °F) of 68 high-temperature Co-, Fe-, and Ni-base alloys /
by: Barrett, Charles A.
Published: (1997)

Alloy 800 : proceedings of the Petten international conference /
Published: (1978)

Superalloys /
Published: (1984)