Cover Image

Defect localization capabilities of a global detection scheme : spatial pattern recognition using full-field vibration test data in plates /

Bibliographic Details
Main Author:	Saleeb, Atef F. (Atef Fatthy), 1952-
Corporate Author:	NASA Glenn Research Center
Format:	Government Document Book
Language:	English
Published:	[Cleveland, Ohio] : Hanover, MD : National Aeronautics and Space Administration, Glenn Research Center ; Available from NASA Center for Aerospace Information, [2002]
Series:	NASA contractor report ; NASA CR-211685.
Subjects:	Experimentation. Modal testing. DETECTION. Health monitoring. Damage.
Online Access:	https://purl.fdlp.gov/GPO/LPS46476

Similar Items

Integrating oil debris and vibration gear damage detection technologies using fuzzy logic /
by: Dempsey, Paula J.
Published: (2002)

Threshold assessment of gear diagnostic tools on flight and test rig data /
by: Dempsey, Paula J.
Published: (2003)

A study of time-dependent and anisotropic effects on the deformation response of two flywheel designs /
by: Saleeb, Atef F. (Atef Fatthy), 1952-
Published: (2003)

Structural damage detection using virtual passive controllers /
by: Lew, Jiann-Shiun
Published: (2001)

Specific hardening function definition and characterization of a multimechanism generalized potential-based viscoelastoplasticity model /
by: Saleeb, Atef F. (Atef Fatthy), 1952-
Published: (2003)

Distributed impact detector system (DIDS) health monitoring system evaluation /
by: Prosser, William H.
Published: (2010)

A computationally-efficient, multi-mechanism based framework for the comprehensive modeling of the evolutionary behavior of shape memory alloys /
by: Saleeb, Atef F. (Atef Fatthy), 1952-, et al.
Published: (2016)

Open circuit resonant sensors for composite damage detection and diagnosis /
by: Mielnik, John J.
Published: (2011)

Baseline assessment and prioritization framework for IVHM integrity assurance enabling capabilities /
Published: (2009)

A model-based anomaly detection approach for analyzing streaming aircraft engine measurement data /
by: Simon, Donald L., et al.
Published: (2015)

Investigation of tapered roller bearing damage detection using oil debris analysis /
by: Dempsey, Paula J.
Published: (2006)

Gear damage detection using oil debris analysis /
by: Dempsey, Paula J.
Published: (2001)

On-orbit damage detection and health monitoring of large space trusses : status and critical issues /
by: Kashangaki, Thomas A. L.
Published: (1991)

Optical strain and crack-detection measurements on a rotating disk /
by: Woike, Mark R.
Published: (2013)

A study of time-dependent and anisotropic effects on the deformation response of two flywheel designs /
by: Saleeb, Atef F. (Atef Fatthy), 1952-, et al.
Published: (2003)

Directed design of experiments for validating probability of detection capability of NDE systems (DOEPOD) /
by: Generazio, Edward R.
Published: (2015)

Binomial test method for determining probability of detection capability for fracture critical applications /
by: Generazio, Edward R.
Published: (2011)

A comparison of the capability of sensitivity level 3 and sensitivity level 4 fluorescent penetrants to detect fatigue cracks in various metals /
by: Parker, Bradford H.
Published: (2011)

Probabilistic damage characterization using a computationally-efficient Bayesian approach /
by: Warner, James E., et al.
Published: (2016)

A comparison of the capability of sensitivity level 3 and sensitivity level 4 fluorescent penetrants to detect fatigue cracks in aluminum /
by: Parker, Bradford H.
Published: (2009)

Damage detection using holography and interferometry /
by: Decker, Arthur J.
Published: (2003)

Using neural networks for sensor validation /
by: Mattern, Duane L. (Duane Loren)
Published: (1998)

Applications of fault detection in vibrating structures /
by: Eure, Kenneth W.
Published: (2012)

Microfabricated ice-detection sensor /
by: DeAnna, Russell G., et al.
Published: (1997)

Analysis of Space Shuttle ground support system fault detection, isolation, and recovery processes and resources /
by: Gross, Anthony R.
Published: (2009)

Planetary gearbox fault detection using vibration separation techniques /
Published: (2011)

A three-dimensional Receiver Operator Characteristic surface diagnostic metric /
by: Simon, Donald L.
Published: (2011)

Strain-based damage determination using finite element analysis for structural health management /
by: Hochhalter, Jacob D., et al.
Published: (2016)

Sensor and actuator needs for more intelligent gas turbine engines /
Published: (2010)

Fiber optic strain sensor for planetary gear diagnostics /
Published: (2011)

Thermoelastic vibration test techniques /
by: Kehoe, M. W.
Published: (1991)

Minimizing load effects on NA4 gear vibration diagnostic parameter /
by: Dempsey, Paula J.
Published: (2001)

Minimizing load effects on NA4 gear vibration diagnostic parameter /
by: Dempsey, Paula J., et al.
Published: (2001)

Procedure for automated Eddy Current crack detection in thin titanium plates /
by: Wincheski, Russell, A.
Published: (2012)

Digital multi-shaker modal testing /
by: Blair, Mark, et al.
Published: (1983)

A benchmark problem for development of autonomous structural modal identification /
by: Pappa, Richard S., et al.
Published: (1996)

Multishaker modal testing /
by: Craig, Roy R., 1934-
Published: (1983)

An examination of launch vehicle loads reanalysis techniques /
by: Kammer, Daniel C., et al.
Published: (2018)

Passive fetal heart rate monitoring apparatus and method with enhanced fetal heart beat discrimination /
Published: (1994)

Implementation of an integrated on-board aircraft engine diagnostic architecture /
by: Armstrong, Jeffrey B.
Published: (2012)