Final report on advanced nondestructive evaluation for steam generator tubing for the Second International Steam Generator Tube Integrity Program /

Circumferential cracking of steam generator tubes.
Published: (1995)

Operational experience on steam generator tube leaks and tube ruptures.
Published: (1994)

Stress corrosion cracking in PWR steam generator tubes.
Published: (1990)

Steam generator tube integrity issues : pressurization rate effects, failure maps, leak rate correlation models, and leak rates in restricted areas /
Published: (2009)

Requirements for steam generator tube inspections.
Published: (2004)

Tube-to-tube contact resulting in wear in once-through steam generators.
Published: (2012)

Intergranular stress corrosion cracking leading to steam generator tube failure.
Published: (1984)

Results of blind testing for the program to assess the reliability of emerging nondestructive techniques /
by: Meyer, R. M., et al.
Published: (2017)

Congressional request for information concerning steam generator tube integrity.
Published: (1982)

Advanced NDE for steam generator tubing /
by: Bakhtiari, Sasan, et al.
Published: (2000)

Steam generator tube ruptures at two PWR facilities.
Published: (1979)

Second U.S. Nuclear Regulatory Commission international steam generator tube integrity research program : final project summary report /
Published: (2003)

Tube leakage due to a fabrication flaw in a replacement steam generator.
Published: (2004)

Supplemental information to Generic Letter 95-03 "Circumferential cracking of steam generator tubes".
Published: (1995)

Potential failure of Westinghouse steam generator tube mechanical plugs.
Published: (1989)

Weakness in emergency operating procedures found as result of steam generator tube rupture.
Published: (1993)

Potential for stress corrosion cracking in steam generator tube plugs supplied by Babcock and Wilcox.
Published: (1989)

Inservice inspection deficiencies result in severely degraded steam generator tubes.
Published: (1994)

Results of open testing for the program to assess the reliability of emerging nondestructive techniques /
by: Meyer, R. M., et al.
Published: (2017)

Degradation of steam generator internals.
Published: (1997)

Problems with the reliable detection of intergranular attack (IGA) of steam generator tubing.
Published: (1991)

Cracking indications in thermally treated alloy 600 steam generator tubes.
Published: (2008)

Strategy for assessment of WWER steam generator tube integrity : report prepared within the framework of the Coordinated Research Project on Verification of WWER Steam Generator Tube Integrity.
Published: (2007)

Draft NUREG-1477, "Voltage-based interim plugging criteria for steam generator tubes".
Published: (1993)

Assessment of NDE methods on inspection of HDPE butt fusion piping joints for lack of fusion /
Published: (2012)

Detached check valve disc not detected by use of acoustic and magnetic nonintrusive test techniques.
Published: (2000)

Staff recommended actions stemming from NRC integrated program for the resolution of unresolved safety issues regarding steam generator tube integrity.
Published: (1985)

Steam generator tube and support configuration.
Published: (2005)

Foreign objects in steam generators.
Published: (1988)

In-tube steam condensation in the presence of air under transient conditions /
by: Tanrikut, A.
Published: (2007)

The technical basis supporting ASME code, section XI, appendix VIII : performance demonstration for ultrasonic examination /
by: Doctor, S. R.
Published: (2013)

Steam generator channel head and tubesheet degradation.
Published: (2013)

Steam generator overfill.
Published: (1981)

Recent experience with plugged steam generator tubes.
Published: (2002)

Operation with steam generator tubes seriously degraded.
Published: (1992)

Crack-like indications at dents/dings and in the freespan region of thermally treated alloy 600 steam generator tubes.
Published: (2013)