An approach for estimating the frequencies of various containment failure modes and bypass events : draft report for comment /

Reactor cavity annulus seal ring.
Published: (1978)

Containment integrated leak rate tests.
Published: (1985)

Fracture analysis of vessels : Oak Ridge FAVOR, v.04.1, computer code : users guide /
by: Dickson, Terry Lynn, 1950-
Published: (2007)

Potential common-mode post-accident failure of containment coolers.
Published: (1996)

Potential loss of effective volume for containment recirculation spray at PWR facilities.
Published: (1990)

Potential degradation of secondary containment.
Published: (1990)

GSI-191 PWR sump screen blockage chemical effects tests : thermodynamic simulations /
Published: (2006)

Degraded coatings and corrosion of steel containment vessels.
Published: (1989)

Overpressurization of containment of a PWR plant after a main steam line break.
Published: (1979)

Aluminum chemistry in a prototypical post-loss-of-coolant-accident, pressurized-water-reactor containment environment /
Published: (2006)

Final results of the hydrogen igniter experimental program /
by: Lowry, W. E., et al.
Published: (1982)

Recent discovery of a phenomenon not previously considered in the design of secondary containment pressure control.
Published: (1988)

Partial bypass of shutdown cooling flow from the reactor vessel.
Published: (1996)

Liner plate corrosion in concrete containments.
Published: (1997)

Degradation of steel containments.
Published: (1986)

Containment liner corrosion.
Published: (2010)

The Role of nuclear reactor containment in severe accidents : report /
Published: (1989)

Technical basis for the containment protection and release reduction rulemaking for boiling water reactors with Mark I and Mark II containments /
by: Barr, Jonathan
Published: (2018)

Potential for degradation of the emergency core cooling system and the containment spray system after a loss-of-coolant accident because of construction and protective coating deficiencies and foreign material in containment.
Published: (1998)

Isolation of reactor coolant system from low-pressure systems outside containment.
Published: (1984)

Errors in main steam line break analyses for determining containment parameters.
Published: (1991)

Hydrogen:air:steam flammability limits and combustion characteristics in the FITS vessel /
by: Marshall, Billy W.
Published: (1986)

Containment concrete surface condition examination frequency and acceptance criteria.
Published: (2010)

Potential blockage of safety-related strainers by material brought inside containment.
Published: (1995)

Steel containment degradation and associated license renewal aging management issues.
Published: (2011)

GSI-191 : experimental studies of loss-of-coolant-accident-generated debris accumulation and head loss with emphasis on the effects of calcium silicate insulation /
Published: (2005)

Corrosion rate measurements and chemical speciation of corrosion products using thermodynamic modeling of debris components to support GSI-191 /
by: Jain, V.
Published: (2005)

Safety/relief valve quencher loads : evaluation for BWR Mark II and III containments.
Published: (1982)

Potential for common-mode failure of standby gas treatment system on loss of off-site power.
Published: (1985)

Inoperable containment atmosphere sensing systems.
Published: (1983)

Debris in containment and the residual heat removal system.
Published: (1994)

Improper closure of primary containment access hatches.
Published: (1979)

Mark I containment long-term program.
Published: (1980)

Degradation of leak-chase channel systems for floor welds of metal containment shell and concrete containment metallic liner.
Published: (2014)

Effects of degradation on the severe accident consequences for a PWR plant with a reinforced concrete containment vessel /
by: Petti, J. P.
Published: (2013)

Acceptance criteria for the Mark I containment long term program.
Published: (1979)