Handbook of workability and process design /

Formability, analysis, modeling, and experimentation : proceedings of a symposium held in Chicago, Illinois, October 24 and 25, 1977 /
Published: (1978)

Formability of metallic materials : plastic anisotropy, formability testing, forming limits /
Published: (2000)

Engineering plasticity : theory and applications in metal forming /
by: Wang, Zhongren, 1934-
Published: (2018)

Sheet metal forming processes : constitutive modelling and numerical simulation /
by: Banabic, D. (Dorel)
Published: (2010)

Hot working guide : a compendium of processing maps /
Published: (1997)

Fatigue considerations in machine design : essentials of endurance analysis /
by: Little, Robert E.
Published: (2020)

Hydroforming for advanced manufacturing /
Published: (2008)

Determination of the mechanical and technological properties of metals /
by: Gliner, B. M.
Published: (1960)

Rapid inexpensive tests for determining fracture toughness : report of the Committee on Rapid Inexpensive Tests for Determining Fracture Toughness.
Published: (1976)

Surface stressing of metals /
Published: (1947)

Elements of mechanical metallurgy /
by: Tegart, William John McGregor
Published: (1966)

Manual on low cycle fatigue testing.
Published: (1969)

Plane strain crack toughness testing of high strength metallic materials /
by: Brown, William F., 1922-
Published: (1966)

Analysis of metallurgical failures /
by: Colangelo, Vito J.
Published: (1987)

Source book in failure analysis : a discriminative selection of outstanding articles and case histories from the periodical literature /
Published: (1974)

Analysis of metallurgical failures /
by: Colangelo, Vito J.
Published: (1974)

Prevention of the failure of metals under repeated stress : a handbook prepared for the Bureau of aeronautics, Navy department, by the staff of Battelle memorial institute, under the auspices of the National research council of the National academy of sciences.
Published: (1941)

Techniques for multiaxial creep testing /
Published: (1986)

The non-destructive testing of metals.
by: Hanstock, R. F.
Published: (1951)

Magnetic crack-detection ; notes on working principles and use of apparatus /
by: Young, G. B.
Published: (1942)

Impact resistance and tensile properties of metals at sub-atmospheric temperatures /
Published: (1941)

Symposium on magnetic testing, 1948 ; presented at the fifty-first annual meeting, Detroit, Mich., June 22, 1948.
Published: (1949)

Hardness measurement of metals and alloys.
by: O'Neill, Hugh, 1899-
Published: (1967)

Ispytanie metallov na iznos.
by: Kostet︠s︡kiĭ, B. I.
Published: (1955)

Properties of metals at elevated temperatures /
by: Smith, G. V. (George V.), 1916-
Published: (1950)

Symposium on newer metals ; presented at the third Pacific area national meeting. San Francisco, Calif., October 15 and 16, 1959.
Published: (1960)

The hardness of metals and its measurement /
by: O'Neill, Hugh E.
Published: (1934)

Inspection of metals /
by: Anderson, Robert Clark
Published: (1983)

High temperature properties of metals /
Published: (1951)

Determination of the mechanical and technological properties of metals /
by: Gliner, Boris Moiseevich
Published: (1960)

Testing of metals /
by: Simons, Eric N.
Published: (1972)

Creep of metals /
by: Tapsell, Herbert James
Published: (1931)

High temperature properties of metals /
Published: (1951)

Strength and resistance of metals.
by: Lessells, John Moyes, 1888-
Published: (1954)

Interpretation of tests and correlation with service /
Published: (1951)

Prochnostʹ metallov.
Published: (1956)