Cover Image

A model for predicting the evolution of damage in the plastic bonded explosive LX17 /

Viscoelastic cohesive zones are employed within the framework of a finite element code to model a two-phase particle-reinforced composite material consisting of a relatively stiff aggregate embedded in a copolymer binder. The composite of interest, LX17, is noted to have a very large aggregate volu...

Full description

Bibliographic Details
Main Author:	Seidel, Gary Don, 1975-
Format:	Thesis eBook
Language:	English
Published:	[Place of publication not identified] : [publisher not identified] ; 2002.
Subjects:	Major aerospace engineering.
Online Access:	Link to OAKTrust copy

Similar Items

Mechanical modeling of the plastic bonded explosive LX17 /
by: Clayton, Kyle Martin, 1975-
Published: (2001)

A computational model for predicting damage evolution in laminated composite plates /
by: Phillips, Mark Lane, 1972-
Published: (1999)

Constitutive modelling of damage and plasticity in metal matrix composites /
by: Boyd, James Greenup, 1961-
Published: (1994)

Modeling the mechanical response and damage evolution in inelastic polycrystalline solids /
by: Helms, Kayleen Lois Elizabeth, 1964-
Published: (2000)

A multiscale model for predicting damage evolution in heterogeneous viscoelastic media /
by: Searcy, Chad Randall, 1972-
Published: (2004)

Prediction of progressive damage of thick viscoelastic laminates /
by: Noh, Jae H., 1968-
Published: (2001)

Prediction of progressive damage and strength of plain weave composites using the finite element method /
by: Srirengan, Kanthikannan
Published: (1997)

A model for predicting the damage and oxidation dependent life of SCS-6/Ti-B21S [0]4 metal matrix composite /
by: Foulk, James Wesley
Published: (1997)

Prediction of damage zone growth in composites using continuum damage mechanics /
by: McLendon, Wesley R.
Published: (2010)

Modeling of surface oxidation and oxidation induced damage in metal matrix composites /
by: Ma, Xinzheng, 1961-
Published: (1995)

A comparison of current work-hardening models used in the analysis of plastic deformations.
by: Vaughn, David Kenneth
Published: (1973)

Damage evolution of a SiC/Ti-15-3 metal matrix composite with different heat treatments /
by: Miller, David Arthur, 1969-
Published: (1995)

Delamination evolution in laminated composites using a cohesive zone model /
by: Lo, David C., 1964-
Published: (1995)

Direct comparison of Neural Network, Fuzzy Logic and Model Prediction Variable Structure vortex flow controllers /
by: Joshi, Praveen Sudhakar
Published: (1999)

A generalized thermomechanical constitutive model for metal matrix composites with plastic strain and damage /
by: Bryan, Sheryl Kay, 1951-
Published: (1988)

An evaluation of four hardening rules of the incremental theory of plasticity.
by: Hunsaker, Barry
Published: (1973)

An evaluation of solution procedures for the analysis of elastic-plastic structures.
by: Deel, Dennis Ray
Published: (1971)

Thermomechanical characterization of plastic deformation and transformation fatigue in shape memory alloys /
by: Miller, David Arthur, 1969-
Published: (2000)

An investigation of axial stresses in a fabric reinforced plastic subjected to repeated bending.
by: Kavanaugh, Herbert C.
Published: (1964)

GPS position determination using a nonlinear predictive filter /
by: Webb, Curtis Brandon
Published: (2002)

Effects of assumed tow architecture on the predicted moduli and stresses in woven composites /
by: Chapman, Clinton Dane
Published: (1993)

A matrix damage accumulation model for laminated composites /
by: Lo, David Chi Shing, 1964-
Published: (1990)

The prediction of airloads on a cascade of staggered blades in oscillatory compressible subsonic flow.
by: Sovinski, John Robert
Published: (1975)

A model for dynamic and aeroelastic response of composite structures with damage evolution /
by: Kim, Young Ik, 1956-
Published: (1993)

Stress analysis and failure of the bond interface of a metal matrix component /
by: Pamel, Michele Lynn
Published: (1995)

Preliminary development of a constitutive model for metal matrix composites with damage /
by: Nottorf, Eric Walter, 1961-
Published: (1985)

An investigation of plastic torsion in circular prismatic bars with a concentric or eccentric hole using the sand-heap analogy.
by: Carey, Gerald John, Jr
Published: (1963)

The evolution of titanium oxidation at elevated temperature and its oxide scale morphology /
by: Imbrie, Peter Kenneth
Published: (2000)

Prediction of a non-uniform freestream velocity distribution for counterrotating propeller configurations and the effect on performance/acoustics /
by: Allen, Christopher Shane, 1964-
Published: (1993)

Prediction of moduli and strength of woven carbon-carbon composites using object-oriented finite element analysis /
by: Chapman, Clinton Dane
Published: (1997)

Evaluation of single-field macro element for predicting 3D material properties of plain weave composites /
by: Noh, Jae Huek, 1968-
Published: (1997)

An investigation of damage accumulation in graphite/epoxy laminates /
by: Norvell, Robert Gerald, 1961-
Published: (1985)

Modeling of Shape Memory Alloy (SMA) spring elements for passive vibration isolation using simplified SMA model and Preisach model /
by: Khan, Mughees Mahmood
Published: (2002)

Stochastic damage evolution under static and fatigue loading in composites with manufacturing defects /
by: Huang, Yongxin
Published: (2012)

Modeling and control of a PowerSail /
by: Naik, Kishore Shivdas, 1976-
Published: (2002)

Constitutive modeling of shape memory alloys /
by: Bo, Zhonghe, 1956-
Published: (1996)

Homogenization and fracture models for thermoviscoelastic solids /
by: Yoon, Chongho, 1963-
Published: (1998)

Model-Error Control Synthesis : a new approach to robust control /
by: Kim, Jong-Rae, 1969-
Published: (2002)

Micromechanical modeling of porous shape memory alloys /
by: Entchev, Pavlin Borissov, 1972-
Published: (2002)

Micromechanics modeling of the multifunctional nature of carbon nanotube-polymer nanocomposites /
by: Seidel, Gary Don
Published: (2010)