Cover Image

Structural testing of a stitched/resin film infused graphite-epoxy wing box /

Show other versions (1)

Bibliographic Details
Main Author:	Jegley, Dawn C.
Corporate Author:	Langley Research Center
Other Authors:	Bush, Harold G.
Format:	Government Document Book
Language:	English
Published:	Hampton, Va. : Hanover, MD : National Aeronautics and Space Administration, Langley Research Center ; Available from NASA Center for AeroSpace Information (CASI), [2001]
Series:	NASA technical memorandum ; 210846.
Subjects:	Graphite-epoxy composites. Wings. Impact damage. Bending. Failure.
Online Access:	Adobe Acrobat Reader required

Similar Items

Structural testing of a stitched/resin film infused graphite-epoxy wing box /
by: Jegley, Dawn C., et al.
Published: (2001)

Correlation of structural analysis and test results for the McDonnell Douglas stitched/RFI all-composite wing stub box /
by: Wang, John T.
Published: (1996)

The effect of resin toughness and modulus on compressive failure modes of quasi-isotropic graphite/epoxy laminates /
by: Sohi, Mohsen M.
Published: (1986)

Relevance of impacter shape to nonvisible damage and residual tensile strength of a thick graphite/epoxy laminate /
by: Poe, C. C.
Published: (1990)

Structural test documentation and results for the McDonnell Douglas all-composite wing stub box /
by: Jegley, Dawn C.
Published: (1997)

Scaling effects in the static large defelction [as printed] response of graphite-epoxy composite beams /
by: Jackson, Karen E.
Published: (1989)

Measurement of damping of graphite epoxy materials /
by: Crocker, Malcolm J.
Published: (1985)

Structural test documentation and results for the McDonnell Douglas all-composite wing stub box /
by: Jegley, Dawn C., et al.
Published: (1997)

Summary of a study to determine low-velocity impact damage and residual tension strength for a thick graphite/epoxy motor case /
by: Poe, C. C.
Published: (1990)

Mode II interlaminar fracture toughness and fatigue characterization of a graphite epoxy composite material /
by: O'Brien, T. Kevin
Published: (2010)

Fabrication of lower section and upper forward bulkhead panels of the multi-bay box and panel preparation : final report /
by: Velicki, Alexander
Published: (2015)

Buckling and postbuckling behavior of square compression-loaded graphite-epoxy plates with circular cutouts /
by: Nemeth, Michael P.
Published: (1990)

Damage-tolerance characteristics of composite fuselage sandwich structures with thick facesheets /
by: McGowan, David M., et al.
Published: (1997)

Fuel containment, lightning protection, and damage tolerance in large composite primary aircraft structures /
by: Griffin, C. F. (Charles Francis), 1944-, et al.
Published: (1985)

Process development and fabrication of space station type aluminum-clad graphite epoxy struts /
by: Ring, L. R.
Published: (1990)

Resistivity of pristine and intercalated graphite fiber epoxy composites /
by: Gaier, James R.
Published: (1990)

Measurement of multiaxial ply strength by an off-axis flexure test /
by: Crews, John H.
Published: (1992)

Compression response of a sandwich fuselage keel panel with and without damage /
by: McGowan, David M., et al.
Published: (1997)

Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections /
by: Collins, J. Scott
Published: (1990)

Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections /
by: Collins, J. Scott
Published: (1989)

Adjusting measured weight loss of aged graphite fabric/PMR-15 composites /
by: Bowles, Kenneth J.
Published: (1998)

Cross-sectional examination of the damage zone in impacted specimens of carbon/epoxy and carbon/peek composites /
by: Nettles, A. T. (Alan T.)
Published: (1990)

Progressive fracture of fiber composite build-up structures /
by: Gotsis, Pascal K., et al.
Published: (1996)

Open hole and post-impact compression fatigue of stitched and unstitched carbon/epoxy composites /
by: Portanova, M. A. (Marc A.)
Published: (1990)

An experimental study of a stitched composite with a notch subjected to combined bending and tension loading /
by: Palmer, Susan O., et al.
Published: (1999)

Compression failure mechanisms of composite structures /
by: Hahn, H. Thomas, et al.
Published: (1986)

Gravimetric measurements of materials outgassing applied to graphite-epoxy laminates /
by: Scialdone, John J.
Published: (1989)

The impact response of carbon/epoxy laminates /
by: Nettles, A. T. (Alan T.), et al.
Published: (1997)

Composite transport wing technology development /
by: Madan, Ram C.
Published: (1988)

737 graphite composite flight spoiler flight service evaluation : eighth report /
by: Coggeshall, Randy L.
Published: (1985)

Mechanical property characterization and impact resistance of selected graphite/PEEK composite materials /
by: Baker, Donald J.
Published: (1991)

Poly(arylene ether-co-imidazole)s as toughness modifiers for epoxy resins : patent application /
Published: (1994)

Properties of two carbon composite materials using LTM25 epoxy resin /
by: Cross, John R., et al.
Published: (1996)

The behavior of a stitched composite large-scale multi-bay pressure box /
by: Jegley, Dawn C.
Published: (2016)

Fatigue damage in notched composite laminates under tension-tension cyclic loads /
Published: (1985)

Comparison of open-hole compression strength and compression after impact strength on carbon fiber/epoxy laminates for the Ares I composite interstage /
by: Hodge, A. J.
Published: (2011)

Evaluation of the behavior of Technova Corporation rod-stiffened stitched compression specimens /
by: Dawn C. Jegley
Published: (2013)

The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy /
by: Nettles, A. T. (Alan T.), et al.
Published: (1992)

Prediction of composite laminate fracture : micromechanics and progressive fracture /
by: Gotsis, Pascal K., et al.
Published: (1996)

Analysis of interlaminar fracture in composites under combined loading : semi-annual report /
by: Armanios, Erian A.
Published: (1989)