An assessment of the state-of-the-art in the design and manufacturing of large composite structures for aerospace vehicles /
| Main Author: | Harris, Charles E., 1950- |
|---|---|
| Corporate Author: | Langley Research Center |
| Other Authors: | Starnes, James H., Shuart, Mark J. |
| Format: | Government Document Book |
| Language: | English |
| Published: |
Hampton, Va. : Hanover, MD :
National Aeronautics and Space Administration, Langley Research Center ; Available from NASA Center for AeroSpace Information (CASI),
[2001]
|
| Series: | NASA technical memorandum ;
210844. |
| Subjects: | |
| Online Access: | Adobe Acrobat Reader required |
Similar Items
A straightforward approach to thickness tailoring in composite structures using non-traditional layups /
by: Guin, W. E., et al.
Published: (2021)
by: Guin, W. E., et al.
Published: (2021)
An assessment of the state-of-the-art in the design and manufacturing of large composite structures for aerospace vehicles /
by: Harris, Charles E., 1950-, et al.
Published: (2001)
by: Harris, Charles E., 1950-, et al.
Published: (2001)
A fully nonmetallic gas turbine engine enabled by additive manufacturing /
by: Grady, Joseph E.
Published: (2015)
by: Grady, Joseph E.
Published: (2015)
Constitutive modeling of nanotube-reinforced polymer composite systems /
Published: (2001)
Published: (2001)
Structural analysis and optimization of a composite fan blade for future aircraft engine /
by: Coroneos, Rula M.
Published: (2012)
by: Coroneos, Rula M.
Published: (2012)
HITCAN for actively cooled hot-composite thermostructural analysis /
Published: (1991)
Published: (1991)
Experimental behavior of fatigued single stiffener PRSEUS specimens /
by: Jegley, Dawn C.
Published: (2009)
by: Jegley, Dawn C.
Published: (2009)
Development of quiet honeycomb panels /
by: Palumbo, Daniel L.
Published: (2009)
by: Palumbo, Daniel L.
Published: (2009)
The behavior of a stitched composite large-scale multi-bay pressure box /
by: Jegley, Dawn C.
Published: (2016)
by: Jegley, Dawn C.
Published: (2016)
Simplified design procedures for fiber composite structural components/joints /
by: Murthy, P. L. N.
Published: (1990)
by: Murthy, P. L. N.
Published: (1990)
On processing development for fabrication of fiber reinforced composite, II /
by: Hou, T. H.
Published: (1989)
by: Hou, T. H.
Published: (1989)
On processing development for fabrication of fiber reinforced composite, II /
by: Hou, T. H.
Published: (1989)
by: Hou, T. H.
Published: (1989)
Comparison of requirements for composite structures for aircraft and space applications /
Published: (2010)
Published: (2010)
Structural tailoring of select fiber composite structures /
by: Chamis, C. C. (Christos C.)
Published: (1990)
by: Chamis, C. C. (Christos C.)
Published: (1990)
Structural test documentation and results for the McDonnell Douglas all-composite wing stub box /
by: Jegley, Dawn C.
Published: (1997)
by: Jegley, Dawn C.
Published: (1997)
A damage resistance comparison between candidate polymer matrix composite feedline materials /
by: Nettles, A. T. (Alan T.)
Published: (2000)
by: Nettles, A. T. (Alan T.)
Published: (2000)
A comparison of metallic, composite and nanocomposite optimal transonic transport wings /
by: Kennedy, Graeme J., et al.
Published: (2014)
by: Kennedy, Graeme J., et al.
Published: (2014)
Multi-objective shape and material optimization of composite structures including damping /
by: Saravanos, D. A.
Published: (1990)
by: Saravanos, D. A.
Published: (1990)
Design and test of an improved crashworthiness small composite airframe /
by: Terry, James Evan
Published: (2002)
by: Terry, James Evan
Published: (2002)
Evaluation of long composite struts /
Published: (2011)
Published: (2011)
Evaluation of nanomaterial approaches to damping in epoxy resin and carbon fiber/epoxy composite structures by dynamic mechanical analysis /
by: Miller, Sandi G.
Published: (2013)
by: Miller, Sandi G.
Published: (2013)
The effect of general statistical fiber misalignment on predicted damage initiation in composites /
by: Bednarcyk, Brett A., et al.
Published: (2014)
by: Bednarcyk, Brett A., et al.
Published: (2014)
Nicalon/siliconoxycarbide ceramic composites /
Published: (1990)
Published: (1990)
An integrated methodology for optimizing structural composite damping /
by: Saravanos, D. A.
Published: (1989)
by: Saravanos, D. A.
Published: (1989)
Resin selection criteria for "tough" composite structures /
by: Chamis, C. C. (Christos C.), et al.
Published: (1983)
by: Chamis, C. C. (Christos C.), et al.
Published: (1983)
Development of tough, strong, and pest-resistant MoSi₂-βSi₃N₄ composites for high-temperature structural applications /
Published: (2001)
Published: (2001)
The influence of manufacturing process parameters on adhesively bonded joints: an evaluation of surface preparation, cure profile, and adhesive out-time /
by: Guin, W. E., et al.
Published: (2021)
by: Guin, W. E., et al.
Published: (2021)
Computational composite mechanics for aerospace propulsion structures /
by: Chamis, C. C. (Christos C.)
Published: (1986)
by: Chamis, C. C. (Christos C.)
Published: (1986)
Structural behavior of composites with progressive fracture /
by: Minnetyan, Levon
Published: (1990)
by: Minnetyan, Levon
Published: (1990)
Stochastic-strength-based damage simulation tool for ceramic matrix and polymer matrix composite structures /
by: Nemeth, Noel N.
Published: (2016)
by: Nemeth, Noel N.
Published: (2016)
An integrated methodology for optimizing structural composite damping /
by: Saravanos, D. A. (Dimitris A.)
Published: (1989)
by: Saravanos, D. A. (Dimitris A.)
Published: (1989)
Validation of design and analysis techniques of tailored composite structures /
by: Wijayratne, Dulnath D.
Published: (2004)
by: Wijayratne, Dulnath D.
Published: (2004)
NASA-UVA Light Aerospace Alloy and Structures Technology Program : a progress report, January 1, 1990 to June 30, 1990 /
Published: (1990)
Published: (1990)
Fatigue debonding characterization in composite skin/stringer configurations /
by: Cvitkovich, Michael, et al.
Published: (1997)
by: Cvitkovich, Michael, et al.
Published: (1997)
Tailoring of composite links for optimal damped elasto-dynamic performance /
by: Saravanos, D. A. (Dimitris A.)
Published: (1989)
by: Saravanos, D. A. (Dimitris A.)
Published: (1989)
Tailoring of composite links for optimal damped elasto-dynamic performance /
by: Saravanos, D. A. (Dimitris A.)
Published: (1989)
by: Saravanos, D. A. (Dimitris A.)
Published: (1989)
Tool for generation of MAC/GMC representative unit cell for CMC/PMC analysis /
by: Murthy, P. L. N., et al.
Published: (2016)
by: Murthy, P. L. N., et al.
Published: (2016)
Properties of two carbon composite materials using LTM25 epoxy resin /
by: Cross, John R., et al.
Published: (1996)
by: Cross, John R., et al.
Published: (1996)
Effects of noncoplanar biphenyldiamine on the processing and properties of addition polyimides /
by: Chuang, Kathy C., et al.
Published: (1992)
by: Chuang, Kathy C., et al.
Published: (1992)
Thermal expansion behavior of hot-pressed engineered matrices /
by: Raj, Sai V.
Published: (2016)
by: Raj, Sai V.
Published: (2016)