Cover Image

Testing of face-milled spiral bevel gears at high-speed and load /

Show other versions (1)

Bibliographic Details
Main Author:	Handschuh, Robert F.
Corporate Authors:	Zhongguo ji xie gong cheng xue hui (Beijing, China), NASA Glenn Research Center
Format:	Government Document Book
Language:	English
Published:	[Cleveland, Ohio] : Hanover, MD : National Aeronautics and Space Administration, Glenn Research Center ; Available from NASA Center for Aerospace Information, [2001]
Series:	NASA technical memorandum ; 210743. ARL-TR (Aberdeen Proving Ground, Md.) ; 2381.
Subjects:	AEROSPACE ENGINEERING. Spiral bevel gears. Rotary wing aircraft. MECHANICAL DRIVES. Thermodynamic properties.
Online Access:	Adobe Acrobat Reader required

Similar Items

Testing of face-milled spiral bevel gears at high-speed and load /
by: Handschuh, Robert F.
Published: (2001)

Investigation of spiral bevel gear condition indicator validation via AC-29-2C combining test rig damage progression data with fielded rotorcraft data /
by: Dempsey, Paula J.
Published: (2015)

Gear tooth wear detection algorithm / Irebert R. Delgado.
by: Delgado, Irebert R.
Published: (2015)

Experimental comparison of face-milled and face-hobbed spiral bevel gears /
Published: (2001)

Investigation of spiral bevel gear condition indicator validation via AC-29-2C using fielded rotorcraft HUMS data /
by: Dempsey, Paula J.
Published: (2014)

Computerized design, generation, and simulation of meshing and contact of face-milled formate cut spiral bevel gears /
by: Litvin, F. L. (Faydor L.)
Published: (2001)

Integrating condition indicators and usage parameters for improved spiral bevel gear health monitoring /
by: Dempsey, Paula J., et al.
Published: (2013)

Contact and bending durability calculation for spiral-bevel gears /
by: Vijayakar, Sandeep
Published: (2016)

Investigation of spiral bevel gear condition indicator validation via AC-29-2C using damage progression tests /
by: Dempsey, Paula J.
Published: (2014)

Investigation of sideband index response to prototype gear tooth damage /
by: Dempsey, Paula J.
Published: (2013)

Validation of helicopter gear condition indicators using seeded fault tests /
by: Dempsey, Paula, et al.
Published: (2013)

Evaluation of MEMS-based wireless accelerometer sensors in detecting gear tooth faults in helicopter transmissions /
by: Lewicki, David G., et al.
Published: (2015)

Investigation of gearbox vibration transmission paths on gear condition indicator performance /
by: Dempsey, Paula J.
Published: (2013)

Computerized design and analysis of face-milled, uniform tooth height, spiral bevel gear drives /
by: Litvin, F. L. (Faydor L.), et al.
Published: (1996)

Continued evaluation of gear condition indicator performance on rotorcraft fleet /
by: Delgado, Irebert R.
Published: (2013)

Helical face gear development under the Enhanced Rotorcraft Drive System Program /
Published: (2011)

Test facility simulation results for aerospace loss-of-lubrication of spur gears /
by: Handschuh, Robert F., et al.
Published: (2014)

Generation and tooth contact analysis of spiral bevel gears with predesigned parabolic functions of transmission errors /
by: Litvin, F. L. (Faydor L.)
Published: (1989)

Recent advances in the analysis of spiral bevel gears /
by: Handschuh, Robert F.
Published: (1997)

Topology of modified helical gears /
Published: (1989)

Introduction of the M-85 high-speed rotorcraft concept /
by: Stroub, Robert H.
Published: (1991)

Double helical gear performance results in high speed gear trains /
Published: (2010)

Computations on wings with full-span oscillating control surfaces using Navier-Stokes equations /
by: Guruswamy, Guru P.
Published: (2013)

Straddle design of spiral bevel and hypoid pinions and gears /
by: Litvin, F. L. (Faydor L.)
Published: (1990)

Rotorcraft transmission noise path model, including distributed fluid film bearing impedance modeling /
Published: (2010)

Advanced Rotorcraft Transmission Program /
by: Bill, Robert C.
Published: (1990)

Simulation of crack propagation in engine rotating components under variable amplitude loading /
by: Bonacuse, Peter J., 1960-
Published: (1998)

Medium-sized helicopter noise abatement flight test data report /
by: Pascioni, Kyle A.
Published: (2021)

Spiral microstrip antenna with resistance /
Published: (1994)

Simulating fatigue crack growth in spiral bevel pinion /
by: Ural, Ani
Published: (2003)

Adventures in low disk loading VTOL design /
by: Scully, Mike
Published: (2018)

Planetary gearbox fault detection using vibration separation techniques /
Published: (2011)

Testing of two-speed transmission configurations for use in rotorcraft /
by: Lewicki, David G., et al.
Published: (2015)

Variable-speed simulation of a dual-clutch gearbox tiltrotor driveline /
Published: (2012)

New geometry of worm face gear drives with conical and cylindrical worms : generation, simulation of meshing, and stress analysis /
Published: (2002)

Concept evaluation : NASA reference model 2--side by side /
by: Wagner, Lauren N.
Published: (2019)

Wind-tunnel evaluation of the effect of blade nonstructural mass distribution on helicopter fixed-system loads /
by: Wilbur, Matthew L.
Published: (1998)

Composites for advanced drive systems /
by: Anderson, Cody, et al.
Published: (2019)

Discrete range clustering using Monte Carlo methods /
by: Chatterji, Gano Broto, 1958-, et al.
Published: (1993)

Engagement of metal debris into a gear mesh /
by: Handschuh, Robert F.
Published: (2010)