Near-net shape powder metallurgy rhenium thruster /
| Corporate Author: | NASA Glenn Research Center |
|---|---|
| Other Authors: | Leonhardt, Todd |
| Format: | Government Document Book |
| Language: | English |
| Published: |
[Cleveland, Ohio] : Hanover, MD :
National Aeronautics and Space Administration, Glenn Research Center ; Available from NASA Center for Aerospace Information,
[2001]
|
| Series: | NASA technical memorandum ;
210373. |
| Subjects: | |
| Online Access: | Adobe Acrobat Reader required |
Similar Items
Near-net shape powder metallurgy rhenium thruster /
by: Leonhardt, Todd A.
Published: (2001)
by: Leonhardt, Todd A.
Published: (2001)
Testing of wrought iridium/chemical vapor deposition rhenium rocket /
by: Reed, Brian D., et al.
Published: (1997)
by: Reed, Brian D., et al.
Published: (1997)
Inertial weldment of rhenium and inconel 718 /
by: Cavender, D. P.
Published: (2018)
by: Cavender, D. P.
Published: (2018)
Rhenium mechanical properties and joining technology /
by: Reed, Brian D., et al.
Published: (1996)
by: Reed, Brian D., et al.
Published: (1996)
Effectiveness of diffusion barrier coatings for Mo-Re embedded in C/SiC and C/C /
Published: (2001)
Published: (2001)
Consolidation processing parameters and alternative processing methods for powder metallurgy A1-Cu-Mg-X-X alloys : final report /
by: Sankaran, K. K.
Published: (1987)
by: Sankaran, K. K.
Published: (1987)
Iridium-coated rhenium radiation-cooled rockets /
by: Reed, Brian D., et al.
Published: (1997)
by: Reed, Brian D., et al.
Published: (1997)
The effectiveness of a NiCrY-coating on a powder metallurgy disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2018)
by: Gabb, Timothy Paul, 1958-
Published: (2018)
Study on effects of powder and flake chemistry and morphology on the properties of Al-Cu-Mg-X-X-X powder metallurgy advanced aluminum alloys /
Published: (1985)
Published: (1985)
Fatigue life of a NiCr-coated powder metallurgy disk superalloy after varied processing and exposures /
by: Gabb, Timothy P.
Published: (2018)
by: Gabb, Timothy P.
Published: (2018)
Residual stresses in a NiCrY-coated powder metallurgy disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2017)
by: Gabb, Timothy Paul, 1958-
Published: (2017)
Dwell notch low cycle fatigue behavior of a powder metallurgy nickel disk alloy /
by: Telesman, J.
Published: (2012)
by: Telesman, J.
Published: (2012)
Tribological properties of PM212 : a high-temperature, self-lubricating, powder metallurgy composite /
by: DellaCorte, Christopher
Published: (1989)
by: DellaCorte, Christopher
Published: (1989)
Retention of compressive residual stresses introduced by shot peening in a powder metal disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2016)
by: Gabb, Timothy Paul, 1958-
Published: (2016)
Flame radiation and liner heat transfer in a tubular-can combustor /
by: Claus, Russell W.
Published: (1984)
by: Claus, Russell W.
Published: (1984)
Testing of electroformed deposited iridium/powder metallurgy rhenium rockets /
by: Reed, Brian D., et al.
Published: (1996)
by: Reed, Brian D., et al.
Published: (1996)
Competition of failure modes in an additively manufactured disk superalloy /
by: Gabb, Timothy Paul, 1958-
Published: (2023)
by: Gabb, Timothy Paul, 1958-
Published: (2023)
Rhenium ; papers presented at the Symposium on Rhenium of the Electrothermics and Metallurgy Division of the Electrochemical Society, May 3 and 4, 1960, Chicago, Illinois /
Published: (1962)
Published: (1962)
Fuel-flexible gas turbine combustor flametube facility /
by: Little, James E.
Published: (2004)
by: Little, James E.
Published: (2004)
A design methodology for rapid implementation of active control systems across lean direct injection combustor platforms /
by: Baumann, William T.
Published: (2003)
by: Baumann, William T.
Published: (2003)
Optically based flame detection in the NASA Langley 8-ft high-temperature wind tunnel /
by: Borg, Steven E.
Published: (2005)
by: Borg, Steven E.
Published: (2005)
NASA one-dimensional combustor simulation : user manual for S1D_ML /
by: Stueber, Thomas J., et al.
Published: (2014)
by: Stueber, Thomas J., et al.
Published: (2014)
Combustion dynamics characteristics and fuel pressure modulation responses of a three-cup third-generation swirl-venturi lean direct injection combustion concept /
by: He, Zhuohui J.
Published: (2020)
by: He, Zhuohui J.
Published: (2020)
Mechanical strength and thermophysical properties of PM212 : a high temperature self-lubricating powder metallurgy composite /
Published: (1990)
Published: (1990)
Experimental clean combustor program : phase II : final report /
by: Gleason, C. C.
Published: (1976)
by: Gleason, C. C.
Published: (1976)
Comparison of high aspect ratio cooling channel designs for a rocket combustion chamber with development of an optimized design /
by: Wadel, Mary F.
Published: (1998)
by: Wadel, Mary F.
Published: (1998)
Powder metallurgy
by: T︠S︡ukerman, S. A.
Published: (1965)
by: T︠S︡ukerman, S. A.
Published: (1965)
Orbit transfer vehicle engine technology program combustor wall condition monitoring, subtask II, task E.5 /
by: Szemenyei, B. L.
Published: (1988)
by: Szemenyei, B. L.
Published: (1988)
Optical flameout detector : patent application /
Published: (1993)
Published: (1993)
Foundational performance analyses of pressure gain combustion thermodynamic benefits for gas turbines /
by: Paxson, Daniel E.
Published: (2012)
by: Paxson, Daniel E.
Published: (2012)
The structure of dilute combusting sprays /
by: Shuen, J.-S
Published: (1985)
by: Shuen, J.-S
Published: (1985)
Active combustion control for aircraft gas-turbine engines : experimental results for an advanced, low-emissions combustor prototype /
Published: (2012)
Published: (2012)
Effects of spent cooling and swirler angle on a 9-point swirl-venturi injector /
by: He, Zhuohui J.
Published: (2014)
by: He, Zhuohui J.
Published: (2014)
Introducing the VRT gas turbine combustor /
by: Melconian, Jerry O.
Published: (1990)
by: Melconian, Jerry O.
Published: (1990)
Treatise on powder metallurgy.
by: Goetzel, Claus Guenter, 1913-
Published: (1949)
by: Goetzel, Claus Guenter, 1913-
Published: (1949)
Using the NASA GRC sectored-one-dimensional combustor simulation /
by: Paxson, Daniel E., et al.
Published: (2014)
by: Paxson, Daniel E., et al.
Published: (2014)
Prevention of over-pressurization during combustion in a sealed chamber /
by: Gokoglu, Suleyman A.
Published: (2012)
by: Gokoglu, Suleyman A.
Published: (2012)
Cyclic oxidation and hot corrosion of NiCrY-coated disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2016)
by: Gabb, Timothy Paul, 1958-
Published: (2016)
Effect of notches on creep-fatigue behavior of a P/M nickel-based superalloy /
by: Telesman, Jack
Published: (2015)
by: Telesman, Jack
Published: (2015)
The mechanical properties of candidate superalloys for a hybrid turbine disk /
by: Gabb, Timothy Paul, 1958-
Published: (2013)
by: Gabb, Timothy Paul, 1958-
Published: (2013)