Cover Image

The static and dynamic characteristics of divergent tapered-bore hole-pattern gas seals /

Experimental data is presented for three hole-pattern annular gas seals with differing diverging tapers machined in them. The holes are approximately 3.12 mm (.123 in) deep on average with a hole area to surface area ratio of 43%. The L/d ratio of the seals is approximately 0.75. Taper designs for...

Full description

Bibliographic Details
Main Author:	Carter, Jeremy John, 1976-
Format:	Thesis eBook
Language:	English
Published:	[Place of publication not identified] : [publisher not identified] ; 2001.
Subjects:	Major mechanical engineering.
Online Access:	Link to OAKTrust copy

Similar Items

A comparison of the static and dynamic characteristics of straight-bore and convergent tapered-bore honeycomb annular gas seals /
by: Dawson, Matthew Peter, 1973-
Published: (2000)

A comparison of experimental rotordynamic coefficient and static characteristic results for hole-pattern damper seals and a honeycomb seal /
by: Yu, Zeping
Published: (1996)

Rotordynamic evaluation of frequency dependent impedances of hole-pattern gas damper seals /
by: Holt, Christopher George, 1972-
Published: (2000)

Measured results for a new hole-pattern annular gas seal incorporating larger diameter holes, comparisons to results for a traditional hole-pattern seal and predictions /
by: Vannarsdall, Michael Lloyd
Published: (2012)

Test versus predictions for rotordynamic and leakage characteristics of a convergent-tapered, honeycomb-stator/smooth-rotor annular gas seal /
by: Van Der Velde Alvarez, Daniel Eduardo
Published: (2010)

Statics and dynamics /
by: Meriam, J. L. (James L.)
Published: (1966)

Modifications to a two-control-volume, frequency dependent, transfer-function analysis of hole-pattern gas annular seals /
by: Shin, Yoon Shik, 1976-
Published: (2007)

Measurements versus predictions for rotordynamic coefficients and leakage rates for a novel hole-pattern gas seal /
by: Seifert, Brent Alan, 1980-
Published: (2007)

Engineering statics and dynamics.
by: Pletta, Dan Henry, 1903-
Published: (1951)

The influence of a central groove on static and dynamic characteristics of an annular liquid seal with laminar flow /
by: Graviss, Matthew Sheridan, 1981-
Published: (2005)

Analysis of Instabilities and Their Impact on Friction Factor in Hole-Pattern Seals /
by: Sekaran, Aarthi
Published: (2013)

A comparison of experimental and theoretical results for leakage, pressure gradient, and rotordynamic coefficients for tapered annular gas seals /
by: Elrod, David Alan, 1955-
Published: (1986)

Experimental versus theoretical comparison of the effects of taper and static eccentricity on the rotordynamic coefficients of short, smooth, high-speed, liquid annular seals /
by: Lindsey, William Todd, 1969-
Published: (1993)

A study of the effects of inlet preswirl on the dynamic coefficients of a straight-bore honeycomb gas damper seal /
by: Sprowl, Tony Brandon, 1974-
Published: (2005)

Technical mechanics, statics and dynamics /
by: Maurer, Edward R. (Edward Rose), 1869-1948
Published: (1917)

Engineering mechanics: statics and dynamics /
by: Fanger, Carleton G.
Published: (1970)

Engineering mechanics, statics and dynamics /
by: Shelley, Joseph F.
Published: (1980)

Measurement versus predictions of rotordynamic coefficients and leakage rates for a hole-pattern gas seal with negative preswirl /
by: Brown, Philip David
Published: (2012)

Dynamic Characterization of Annular Gas Seals With 3D Printed Texture Patterns /
by: Moody, Andrew Michael
Published: (2023)

Test versus predictions for rotordynamic coefficients and leakage rates of hole-pattern gas seals at two clearances in choked and unchoked conditions /
by: Wade, Jonathan Leigh, 1979-
Published: (2004)

Static and dynamic fracture mechanics /
Published: (1994)

A foundation course in statics and dynamics /
by: Plum, David
Published: (1997)

Determination of the Characteristics of Tapered Wings.
Published: (1940)

Determination of Characteristics of Tapered Wings.
Published: (1936)

Determination of the Characteristics of Tapered Wings.
Published: (1940)

Combustion Characteristics of a Two-Stroke Large Bore Natural Gas Spark-Ignited Engine /
by: Griffin, Aaron Alexander
Published: (2015)

Static and dynamic characteristics for a two-axial-groove bearing and a pressure-dam bearing /
by: Al Jughaiman, Bader K.
Published: (2010)

Statics /
by: Meriam, J. L. (James L.)
Published: (1975)

Statics /
by: Meriam, J. L. (James L.)
Published: (1966)

Comparison of the effects of pressure and axial load on tapered connections.
by: Till, Larry Percy
Published: (1971)

Analysis of tapered threaded thick walled tubing connections.
by: Weiner, Peter Douglas
Published: (1968)

Static and Dynamic Analysis of Structures : with An Emphasis on Mechanics and Computer Matrix Methods /
by: Doyle, James F.
Published: (1991)

Dual-number methods in kinematics, statics, and dynamics /
by: Fischer, Ian S.
Published: (1999)

Hole sizes for taper tubes for filling cop winders.
Published: (1934)

Static and dynamic buckling of thin-walled plate structures /
by: Kubiak, Tomasz
Published: (2013)

Dynamic and static characteristics of a rocker-pivot, tilting-pad bearing with 50% and 60% offsets /
by: Kulhanek, Chris David
Published: (2012)

Statics : analysis and design of systems in equilibrium /
by: Sheppard, S. (Sheri)
Published: (2007)

Statics : analysis and design of systems in equilibrium /
by: Sheppard, S. (Sheri)
Published: (2005)

Boring a hole in the sky ; six million miles with a fighter pilot /
by: Scott, Robert Lee, Jr., 1908-2006
Published: (1961)

Measurements of static loading characteristics of a Flexurepivot Tilt Pad Hydrodynamic Bearing /
by: Walton, Nicholas Van Edward, 1970-
Published: (1995)