Cover Image

Effect of back clearance and balance hole upon centrifugal pump performance /

A study was performed to investigate the performance of a centrifugal pump with a semi open impeller. Four volumetric flow rates for the maximum attainable speed with the pump test facility were identified as the operating conditions for the pump after generating performance curves. The static pres...

Full description

Bibliographic Details
Main Author:	Hossain, Syed A., 1972-
Format:	Thesis eBook
Language:	English
Published:	[Place of publication not identified] : [publisher not identified] ; 2000.
Subjects:	Major mechanical engineering.
Online Access:	Link to OAKTrust copy

Similar Items

The effects of the back clearance size and the balance holes on the back clearance flow of the centrifugal pump with semi-open impeller /
by: Park, Sang
Published: (2010)

Effects of friction factor and slip factor on the performance of a centrifugal slurry pump /
by: Sheth, Ketankumar Kantilal, 1959-
Published: (1985)

Centrifugal Pumps /
by: Karassik, Igor J.
Published: (1997)

Numerical simulation of the impeller tip clearance effect on centrifugal compressor performance /
by: Hoenninger, Corbett Reed, 1972-
Published: (2001)

Laser velocimetry study of the flow field in a centrifugal pump /
by: Rashid, Kazi M., 1966-
Published: (1993)

Investigation of the axial and radial thrusts in a centrifugal pump /
by: Park, Chong Hwan, 1955-
Published: (1984)

A study of the effect of tip clearance on propeller fan performance.
by: Alam, Md. Shamsul
Published: (1959)

Pressure and momentum field investigation of a centrifugal pump through dynamic loading of a semi-open impeller /
by: Anwer, Sohaib, 1972-
Published: (1998)

Laser velocimetry study of the flow field in a centrifugal pump with a shrouded impeller /
by: Moran, Michael Kevin, 1969-
Published: (1994)

Centrifugal Pump User's Guidebook : Problems and Solutions /
by: Yedidiah, S.
Published: (1996)

Analysis of multi-stage centrifugal pumps using transfer matrices /
by: Kelly, J. Howard, 1963-
Published: (1989)

Centrifugal pumps and allied machinery /
by: Anderson, H. H. (Harold Henry)
Published: (1994)

Troubleshooting centrifugal pumps and their systems /
by: Palgrave, Ron
Published: (2003)

Know and understand centrifugal pumps /
by: Bachus, Larry
Published: (2003)

The effect of bifurcation and chaos on the functioning of mechanical systems with clearance /
by: Sankaravelu, Arunkumar, 1960-
Published: (1994)

Blade tip clearance effect on the performance and flow field of a three stage axial turbine /
by: Abdel-Fattah, Sharef Aly, 1978-
Published: (2003)

Blade loading analysis of a centrifugal impeller using viscous effects.
by: Bale, Yadiyurappa Siddaveerasetty
Published: (1975)

Effects of Sand on the Components and Performance of Electric Submersible Pumps /
by: Carvajal Diaz, Nicolas I.
Published: (2013)

Centrifugal and rotary pumps : fundamentals with applications /
by: Nelik, Lev
Published: (1999)

Stan Shiels on centrifugal pumps : collected articles from "World Pumps" magazine /
by: Shiels, Stan
Published: (2004)

Improving the efficiency of centrifugal fans /
by: Wolfe, Clifford Kent
Published: (1976)

A method of predicting surge in centrifugal compressors.
by: Elchuri, Vijayvardhan
Published: (1975)

Effects of vaned diffuser pressure recovery on centrifugal compressor stage performance /
by: Eason, Robyn Monique, 1959-
Published: (1985)

The effects of outdoor heat exchanger hydrophobic treatment on the performance of an air source heat pump /
by: Parker, Brandon DeWayne, 1964-
Published: (1995)

Effect of backfill on the performance of a vertical U-tube ground coupled heat pump /
by: Gu, Yian, 1960-
Published: (1995)

Slurry Transport Using Centrifugal Pumps /
by: Visintainer, Robert, et al.
Published: (2023)

Contamination effects on the performance of a heat pump charged with R-407C and POE lubricant /
by: Fitzhenry, Shane Alan, 1970-
Published: (1996)

Evaluation of the performance and emission of a gas fired heat pump /
by: Tootle, David Christopher, 1971-
Published: (1998)

The development of a rotordynamics computer code to analyze multi- stage centrifugal pumps /
by: Gajan, Richard James
Published: (1987)

Effect of refrigerant charge, duct leakage, and evaporator air flow on the high temerature performance of air conditioners and heat pumps /
by: Rodriguez, Angel Gerardo, 1971-
Published: (1995)

The effect of spacing and location of bolt holes of steel flanges for pressure vessels and piping.
by: Hall, Harris Harlan
Published: (1949)

The effect of injection hole geometry on flat plate film cooling and heat transfer /
by: Madsen, Eric Perry, 1969-
Published: (1994)

Effect of grooves cut on the periphery of a circular hole in bars subjected to tension.
by: Schmalz, Juan Ricardo
Published: (1967)

Effect of film hole location on heat transfer coefficient and film effectiveness of a gas turbine blade /
by: Jiang, Huan Wanda
Published: (1994)

Investigation of flow in vane-island diffusers in centrifugal compressors /
by: Vandijk, Hanne Nicolaas
Published: (1976)

Suction recirculation and its effects upon axial-flow pump power consumption /
by: Prince, Tony M., 1958-
Published: (1983)

The effects of fastener hole defects /
by: Andrews, Scot D., 1967-
Published: (1991)

A study of the macroscopic performance characteristics of a steady-state electromagnetic pump for an electrolyte.
by: Beal, Charles Clarence
Published: (1967)

Test versus predictions for rotordynamic coefficients and leakage rates of hole-pattern gas seals at two clearances in choked and unchoked conditions /
by: Wade, Jonathan Leigh, 1979-
Published: (2004)

Three-dimensional flow visualization in a centrifugal compressor /
by: Trevillion, William Lee
Published: (1976)