http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Combined performance of coding and equalization for data transmitted over a fading channel
also reduced the time required to. simulate the channel from
criterion. However, the RS codes combined with bit
effect on the bit error rate implying that the ISI 0 present
Equalization to overcome Inter S Symbol Interference (ISI).
error probability of 10-'. This hardware based approach has
from various perspectives. This research employs Reed
hardware instead of software. Moreover, the BER curves show
in this channel cannot be eliminated using blind equalization
interleaving can result in a gain of 0 about 2dB at a bit
modulation, demodulation and channel simulation are done in
software based simulation because the processes of
Solomon (RS) encodina to combat burst noise and Bilnd
that equalization carried out in this research has' little
The problem of data loss on a RF channel has been approached
This simulation of a RF channel is an improvement over the
"Major subject: Electrical Engineering".
Issued also on microfiche from Lange Micrographics.