Cover Image

Effects of peroxide on molecular weight and rheological properties of polypropylene resins /

Peroxide levels used in the production of controlled rheology polypropylene (CRPP) resins were related to their material properties as determined by quality control techniques, fiber spinning processability, and parameters and functions obtained from Theological measurements and modeling. The Theolo...

Full description

Bibliographic Details
Main Author:	Bonilla-Rios, Jaime
Format:	Thesis Book
Language:	English
Published:	[Place of publication not identified] : [publisher not identified] ; 1996.
Subjects:	Major interdisciplinary engineering.
Online Access:	http://proxy.library.tamu.edu/login?url=http://proquest.umi.com/pqdweb?did=739641031&sid=1&Fmt=2&clientId=2945&RQT=309&VName=PQD

Similar Items

Effect of resin toughness on fracture behavior of graphite/epoxy composites /
by: Cohen, Ronald Nelson, 1958-
Published: (1982)

An investigation of interfacial effects on the mechanical properties of aluminum-boron composites.
by: Chiang, James Cheng-Hong
Published: (1971)

The effect of resin toughness on the delamination fracture behavior of graphite/epoxy composites /
by: Jordan, William Mark, 1950-
Published: (1985)

A comprehensive quality planning model /
by: Fournier-Bonilla, Sheila Denise
Published: (1998)

Sorption and permeation of low molecular weight volatile compounds in polypropylene /
by: Vidal, Antonio Ramiro Santiago, Jr., 1961-
Published: (1991)

Relationship between the physical and mineralogical properties of two clays and their bloating characteristics.
by: Abbott, Ute Agnes
Published: (1973)

The effect of processing additives on the wall slip of molten polyethylene /
by: Jeyaseelan, Ranjit Singh, 1967-
Published: (1994)

A new and effective analysis of elastohydrodynamic elliptic contact problems /
by: Yu, Xiaohua
Published: (2002)

An investigation of the attributes contributing to team effectiveness of engineering and science faculty /
by: Adams, Stephanie Glenn
Published: (1998)

Investigating the effects of behavior constructs on academic persistence in engineering, creativity and risk-taking /
by: Deanes, Viveca K.
Published: (2002)

Viscoelastic characterization of a non-linear, glass/epoxy composite including the effects of damage.
by: Beckwith, Scott Williams
Published: (1974)

Aerial 8-14 micron imagery applied to mapping thermal effect mixing boundaries.
by: Foster, Norman Gray
Published: (1970)

Evaluation and analysis of buttock-thigh pressures amongst contemporary ergonomic chairs, with regards to the effects of 3-D fabric and memory foam /
by: Vos, Gordon Alexander
Published: (2001)

The effect of training in the maximum oxygen consumption (VO[] max) and the physical conditioning of college female soccer players (Division I of the NCAA, USA) /
by: Thierry-Aguilera, Ricardo, 1963-
Published: (2000)

Probabilistic design for rotordynamic simulations using receptance based reanalysis /
by: Barrett, Timothy Stuart, 1965-
Published: (1996)

Application of constitutive modeling to the linear and nonlinear viscoelastic behavior of nitrile rubber /
by: Gownder, Mohan Ramasamy
Published: (1996)

A J-integral fracture toughness study of polyethylene films /
by: Thomas, Verghese, 1967-
Published: (1996)

The fundamental nature and control of dislocations in single crystal silicon.
by: Porter, Wilbur Arthur
Published: (1970)

Heterodyne interferometry using Digital Phase Demodulation and Injection Locked Lasers for NDE /
by: Smith, James Arthur, 1963-
Published: (1995)

Transfer function of the visual tract of sheep.
by: Bretz, Robert Elvin
Published: (1975)

Analyzing and designing object-oriented missile simulations with concurrency /
by: Randorf, Jeffrey Allen
Published: (2000)

Improved electrically enhanced phase separation methods for difficult to resolve oily continuous emulsions /
by: Lee, Chang-Ming, 1964-
Published: (2000)

Analysis of thin anisotropic shells of revolution by numerical methods.
by: Drew, Dan Dale
Published: (1966)

Microcracking in fibrous composites.
by: Conrad, Nicholas
Published: (1973)

Cost-sensitivity analyses of wind-resistant mitigative strategies for residential buildings /
by: Lombard, Patricia A.
Published: (1995)

An analytical basis for predicting the physiological limitations of mass transfer rates in hemodialysis.
by: Vakamudi, Ashoak Kumar
Published: (1975)

An investigation into methods of solution for nonlinear structural problems.
by: Henkel, Edwin Eugene
Published: (1973)

Requirements for a common GUI architecture for ultrasound applications /
by: Muthukrishnan, Sreenivas, 1978-
Published: (2001)

Modeling of solidification in near net shape continuous casting /
by: Vanaparthy, Nalini Mohan Rao
Published: (1995)

Evaluation of some deceleration--time pulse shapes for possible incorporation into roadside crash cushion design.
by: Carpenter, Marvin Ernest
Published: (1972)

Analysis of parallel machines with splitting jobs and sequence-dependent set-up times /
by: Santillan, Eduardo Diaz, 1959-
Published: (2002)

A mathematical simulation of oxygen and lactic acid transport in skeletal muscle subject to periodic ischemia.
by: Artigue, Ronald Stephen
Published: (1974)

The hydrodynamic impact of a falling body upon a viscous incompressible fluid.
by: Koehler, Buford Ray
Published: (1974)

The design and the implementation of the Generalized Finite Element Method /
by: Copps, Kevin
Published: (2000)

Experimentation and modeling of compound impact wear /
by: Pumwa, John
Published: (1997)

A model to predict oxygen tension in a capillary-tissue system subject to periodic occlusion.
by: Grounds, Dennis Jay
Published: (1973)

Physiological factors correlating with a possible circadian nadir in G-tolerance /
by: Wright, Bruce Alan
Published: (1998)

The dry fire characterization of several hand-held firearms and the subsequent development of a dual mode weapon mounted laser based training device /
by: Seeton, Gary E.
Published: (2003)

A study of the relationship between grain growth and energy of deformation using the strain-anneal method.
by: Garrison, Dean Herbert
Published: (1970)

Biomechanical, psychophysical, and physiological evaluations of using two-wheel carts in experienced workers based on a soft drink beverage delivery company /
by: Lee, JongSun
Published: (1998)