Development of a three-scale k-Epsilon turbulence model and an assessment for turbomachinery applications /

An experimental investigation of a swirl gas damper for turbomachinery /
by: Handy, Steven Brent
Published: (1992)

Analysis of two-phase flow in damper seals for cryogenic turbomachinery /
by: Arauz, Grigory L., 1964-
Published: (1997)

A theoretical and experimental investigation of gas operated bearing dampers for turbomachinery /
by: Sundararajan, Padmanabhan
Published: (1992)

Diagnosing subsynchronous vibrations in turbomachinery - stable or unstable /
by: Rajagopalan, Vinayaka Narayanan
Published: (2010)

Turbomachinery : design and theory /
by: Gorla, Rama S. R.
Published: (2003)

Experimental response of gas hybrid bearings for high speed oil-free turbomachinery /
by: Wilde, Deborah Anne, 1976-
Published: (2002)

Turbulence model assessment for some non-reacting combustor flow fields /
by: Stowers, Steven Thomas, 1959-

Calculations of diffuser flows with an anisotropic K-[epsilon] model /
by: Zhu, Jieping, et al.
Published: (1995)

Torsional vibration of turbomachinery /
by: Walker, Duncan N.
Published: (2004)

Fluid mechanics of turbomachinery.
by: Wislicenus, George F. (George Friedrich), 1903-
Published: (1947)

Experimental evaluation of rotordynamic coefficients for hybrid metal mesh pocket damper seals in turbomachinery /
by: Burshid, Sami Muhammad, 1973-
Published: (1999)

Analytical and experimental investigations of a labyrinth seal test rig and damper seals for turbomachinery /
by: Shultz, Richard Raymond
Published: (1997)

Logan's turbomachinery : flowpath design and performance fundamentals /
by: Sultanian, Bijay K.
Published: (2019)

Turbulent combustion modeling of coal:biomass blends in a swirl burner /
by: Dhanapalan, Senthilvelan
Published: (1996)

FLUID MECHANICS AND TURBOMACHINERY problems and solutions.
by: Sultanian, Bijay K.
Published: (2021)

Effect of design parameter variations on hybrid (combination hydrostatic and hydrodynamic) bearings for use in high speed turbomachinery /
by: Mosher, Phillip Andrew, 1967-
Published: (1993)

Turbomachinery performance analysis /
by: Lewis, R. I.
Published: (1996)

Turbulent mixing in ducts, theory and experiment application to aerosol single point sampling /
by: Langari, Abdolreza, 1968-
Published: (1997)

Development of analytical and numerical models predicting the deposition rate of electrically charged particles in turbulent channel flows /
by: Ko, Hanseo, 1967-
Published: (1994)

Manufacturing of a gas foil bearing for palm-sized turbomachinery /
by: Creary, Andron
Published: (2010)

Turbulent boundary layer solution for two-dimensional compressible flow using mixing length and K-[epsilon] turbulence models = Résolution du problème des couches limites turbulentes compressibles bidimensionnelles au moyen des modèles de turbulence K-[epsilon] et de longueur de mélange accrue /
by: Khalid, M.
Published: (1990)

Determination of loose spline coupling coefficients of rotor bearing systems in turbomachinery /
by: Park, Sang Kyu, 1957-
Published: (1991)

Schiestel's derivation of the epsilon equation and two equation modeling of rotating turbulence : [final report] /
by: Rubinstein, Robert
Published: (2001)

The riddles of Epsilon /
by: Morton-Shaw, Christine
Published: (2005)

An empirical model for the mean-velocity profiles of a turbulent boundary layer under the effects of surface curvature /
by: Huynh, Long Quang, 1968-
Published: (1994)

Developments in turbomachinery flow : forward curved centrifugal fans /
by: Montazerin, Nader, et al.
Published: (2015)

Thermodynamics and fluid mechanics of turbomachinery /
Published: (1985)

Development, evaluation, and design applications of an AMTEC converter model /
by: Spence, Cliff Alan, 1975-
Published: (2002)

An analog computer study of the transition from fully developed turbulent smooth wall flow to fully developed turbulent rough wall flow in a two-dimensional channel.
by: Sheppard, Donald Max
Published: (1962)

Epsilon-near-zero metamaterials /
by: Li, Yue, et al.
Published: (2021)

Turbulence Modeling for Compressible Shear Flows /
by: Gomez Elizondo, Carlos Arturo
Published: (2013)

Development of a three-dimensional finite element model of a horse's foot /
by: Hanft, Joseph Thomas
Published: (1995)

A study of the dynamics of low energy cushioning material using scale models.
by: Woolam, William Edward
Published: (1965)

Scaling and modeling of three-dimensional, end-wall, turbulent boundary layers /
by: Goldberg, Uriel C., et al.
Published: (1984)

Advances in Fluid Mechanics and Turbomachinery /
by: Rath, Hans J.
Published: (1998)

Modeling inelasticity in materials with application to superplasticity /
by: Praveen, Grama Narasimhaprasad, 1969-
Published: (1999)