Electrical energy monitoring in an industrial plant /
$1327.56. This method can be used as a diagnostic tool to
| Main Author: | |
|---|---|
| Format: | Thesis eBook |
| Language: | English |
| Published: |
[Place of publication not identified] :
[publisher not identified] ;
1994.
|
| Subjects: | |
| Online Access: | Link to OAKTrust copy |
| Summary: | $1327.56. This method can be used as a diagnostic tool to and productivity, and savings due to missed opportunities for determine the amount of active capacitance. In this plant, electrical energy and demand use of a large metal fabrication equipment turn off. event the exact amount of capacitance installed is unknown. facility located in Houston, Texas. Plant selection and the factor on energy consumption and demand is covered, including installation of correction and the effect of increasing the low power factor of this facility from the low 60% range to monitoring installation is described, and other uses (besides monitoring system are covered. The influence of a low power power factor on demand and energy consumption block sizes. predict savings based on precorrection monitored data in the reasonably well with the amount active in the plant. The Savings for the month of February, 1994, are found to be that amount was found to be 315 KVAC, which correlates that dealing with power factor correction) are covered. The installation of capacitance correction has increased the the mid-to-high 70% range. A method has been developed to This thesis presents an investigation into the actual Those uses include monitoring plant and equipment performance |
|---|---|
| Item Description: | "Major subject: Mechanical Engineering". Vita. |
| Physical Description: | xiv, 120 leaves : illustrations ; 28 cm. Also available online. |
| Bibliography: | Includes bibliographical references. |