Double-bottom/double-hull tankers : pro and con /

Hybrid ship hulls : engineering design rationales /
by: Shkolnikov, Vladimir M.
Published: (2014)

Double-hull tanker legislation : an assessment of the Oil Pollution Act of 1990 /
Published: (1998)

Double Bottom/Double-Hull Tankers : Pro and Con.
Published: (1990)

Hull welding manual /
Published: (1962)

Code of practice for the measurement and analysis of the wetness of FRP hulls /
Published: (1998)

Higher-strength steels in hull structues /
Published: (1971)

Hull strapping of ships.
Published: (1990)

Strength of the "Aluminaut" hull.
by: Walsh, J. B.
Published: (1962)

Phase-out of single-hull tank vessels : hearing before the Committee on Commerce, Science, and Transportation, United States Senate, One Hundred Eighth Congress, first session, January 9, 2003.
Published: (2006)

Phase-out of single-hull tank vessels : hearing before the Committee on Commerce, Science, and Transportation, United States Senate, One Hundred Eighth Congress, first session, January 9, 2003.
Published: (2006)

Hull maintenance tech 3 & 2 /
Published: (1972)

Design of ship hull structures : a practical guide for engineers /
Published: (2009)

Transverse strength of ship hull under lateral and in-plane loads by orthotropic plate theory, single-deck and multiple-deck ( -cell) ships.
by: Huang, Hou-Wen

The mechanical and chemical properties of the HY 100 pressure hulls of the submarine, ALVIN /
by: Mavor, James W. (James Watt), 1923-2006
Published: (1965)

Strength of the ALVIN hulls /
by: Walsh, J. B.
Published: (1966)

Bibliography for ship-vibration prediction methods and evaluation of influence of hull-stiffness variation on vibratory response /
by: Kline, Ralph G.
Published: (1974)

Development of a spherical acrylic plastic pressure hull for hydrospace application /
by: Stachiw, Jerry D., 1931-
Published: (1970)

Notch geometry and laminate construction effects on the fracture toughness of laminates for hull construction /
by: Bishop, William O., et al.
Published: (1973)

Criteria for hull-machinery rigidity compatibility.
Published: (1982)

Tanker preliminary design economics /
by: Meyer-Detring, Dieter
Published: (1981)

The motions of connected hulls in regular head seas. /
by: Marbury, Fendall
Published: (1967)

Low friction hull coatings for icebreakers : phase III, technical report /
by: Calabrese, S J.
Published: (1978)

Care and repair of hulls /
by: Verney, Michael P.
Published: (1979)

Flat plate, straight-framed hulls : a study of the concept, its development, application, and economic feasibility /
by: Arnas, Tezal H
Published: (1972)

Examination of service and stress data of three ships for development of hull girder load criteria /
by: Dalzell, J. F.
Published: (1979)

Hull form effect on resistence in smooth water and waves /
by: Numata, E.
Published: (1974)

Determination of the geometric properties of rolled profiles and built-up bar sections used in ship hull structures when assessing their elastic bending, shear, torsion, and plastic bending strength /
by: Ivanov, Lyuben D.
Published: (2000)

Compressive strength of ship hull girders /
by: Becker, H.
Published: (1977)

Effects of bottom maintenance on frictional resistance of ships /
Published: (1975)

A Design procedure for minimizing propeller-induced vibration in hull structural elements.
Published: (1979)

Marine environment effects on fatigue crack propagation in GRP laminates for hull construction /
by: Demchik, Robert P.
Published: (1973)

Polymer-impregnated concrete spherical hulls under hydrostatic loading /
by: Haynes, H. H.
Published: (1971)

Underwater nondestructive testing of ship hull welds.
Published: (1979)

Design of a typical platform deck /
by: Willis, Merville
Published: (1961)

Inspection of marine structures /
by: Demsetz, Laura A.
Published: (1996)

Commonly used shipbuilding terms, definitions and abbreviations : with particular reference to hull construction and fittings.