End effects in laminated beams /

The effect of temperature on the bending of laminated glass beams /
by: Edel, Matthew Thomas, 1973-
Published: (1997)

Optimization of glued-laminated beam performance /
by: Richburg, Brent
Published: (1988)

The effects of thermal and hygroscopic loads on unsymmetric composite laminates /
by: Ross, George Ray, 1965-
Published: (1991)

Transverse shear deformation effects in composite laminated plates /
by: Coulter, Brett Ainsley, 1953-
Published: (1981)

Electrical resistance measurements of highly inhibited SiC coated carbon-carbon laminates /
by: Parker, Paul Albert, 1971-
Published: (1998)

Damage analysis of laminated composite beams under bending loads using the layer-wise theory /
by: Na, Wook Jin
Published: (2010)

Improved analysis of laminated heterogeneous beams and associated formulation of a new finite element method /
by: Khandoker, Shafiqul I.
Published: (1988)

Stiffness reduction and stress transfer in composite laminates with transverse matrix cracks /
by: Praveen, Grama Narasimhaprasad, 1969-
Published: (1994)

Distribution of stresses in a tapered cantilever beam due to a concentrated load at the end.
by: Wilhoit, James Cammack
Published: (1951)

Study of the deflection pattern of a cantilever beam subjected to a transverse load at the end.
by: Jan, Ferdous
Published: (1973)

An experimental and theoretical investigation of nonlinear viscoelastic deformation in graphite/epoxy laminates /
by: Sherman, Marcell, S546
Published: (2000)

Failure determination for a laminated composite plate with a circular hole.
by: Ko, Chi-Ren Clarence
Published: (1975)

Transverse shear and normal stresses in laminated plates /
by: Ochoa, Carlos Milton, 1955-
Published: (1983)

Vibration suppression of laminated composite plates using embedded smart material layers /
by: Krishnan, Sivasubramaniam
Published: (2000)

A numerical approach to beam deflections.
by: Lovell, Joel Ernest
Published: (1974)

A photoelastic study of the stresses at the junction of the curved and straight portions of a curved-end cantilever beam.
by: Crump, Glendon Rowe
Published: (1961)

A design study of simple beams loaded by a pin through the beam along the vertical center line.
by: Cox, Phineas Alexander
Published: (1964)

An investigation of experimental methods of studying vibration of beams.
by: Shah, Hamid Ali
Published: (1956)

The vibration by analogy of certain trusses, beams and plates.
by: Thompson, Lee Price
Published: (1953)

A photoelastic study of a simply supported rectangular beam loaded by a round pin through the center of the beam.
by: Morgan, Jerry Don
Published: (1964)

A photoelastic investigation of the effects of rectangular openings at the neutral axis of beams subject to both bending and shear.
by: Schroeter, Donald Richard
Published: (1964)

Moisture and temperature effects on curvature of anti-symmetric cross-ply graphite/epoxy laminates /
by: Lott, Randall Stephen, 1950-
Published: (1980)

A study of the stresses in a tapered cantilever beam due to a load applied at a distance from the end.
by: Niemeyer, Edward Rupert
Published: (1950)

A photoelastic study of the stresses in simple beams in pure bending due to loads applied through pins at third points in the beam.
by: Slagle, Grady Moreland
Published: (1949)

Analysis of the effect of matrix degradation on fatigue behavior of a graphite/epoxy laminate /
by: Arenburg, Robert Thomas, 1955-
Published: (1982)

A photoelastic study of a beam on an elastic foundation.
by: Beckham, Paul Miles
Published: (1961)

A photoelastic study of the stresses in simple beams due to a load applied to a pin through the beam on the vertical center line.
by: Overly, Charles Richard
Published: (1950)

Modeling laminates using a layerwise finite element with enhanced strains for interlaminar stress recovery and delamination characteristics /
by: Moorthy, Dakshina C. M.
Published: (1997)

A photoelastic study of the bending stresses in an eccentrically curved beam.
by: Spanhel, Frank Velislav, Jr
Published: (1961)

Characterization of the electron beam cure process of an epoxy-initiator system /
by: Ribeiro, Rahul, 1973-
Published: (2003)

An investigation of composite laminates with multiple cutouts /
by: Walsh, Thomas James, 1966-
Published: (1991)

Hygrothermal modeling of thick thermoset resin during electron beam cure /
by: Moon, Sung-Won, 1972-
Published: (2002)

Control of a highly flexible rotating beam : theory and experiments /
by: Chang, Pei-Ming, 1958-
Published: (1990)

Determination of the mode I delamination fracture toughness of multidirectional composite laminates /
by: Goetz, Douglas Paul, 1958-
Published: (1988)

A matrix damage accumulation model for laminated composites /
by: Lo, David Chi Shing, 1964-
Published: (1990)

Experimental investigation of stress distribution in a beam on an elastic foundation by photoelasticity method.
by: Tsien, Vee-Chang
Published: (1948)