Comparative evaluation of conventional and resin bolting systems /

Development length for anchor bolts /
by: Breen, J. E. (John Edward), 1932-
Published: (1964)

Bolted-connection design /
by: Soltis, Lawrence A.
Published: (1987)

Fatigue of anchor bolts /
by: Frank, Karl H.
Published: (1978)

Tightening of high strength metric bolts /
by: Gilroy, Michael J.
Published: (1997)

Bolts, nuts & screws ; a collection of practical discussions on engineering /
by: Peterka, August E. R., 1900-
Published: (1941)

Axial tension fatigue strength of anchor bolts /
by: Fischer, Franklin L.
Published: (1977)

A guide to the selection of high-strength anchor bolt materials /
by: Hasselwander, Gerard B.
Published: (1974)

Strength and behavior of anchor bolts embedded near edges of concrete piers /
by: Hasselwander, Gerard B.
Published: (1977)

Recommendations and suggestions of Bureau of Standards regarding standards for bolt heads, nuts, and screw heads.
Published: (1922)

Failure of steam generator support bolting.
Published: (1980)

Handbook of bolts and bolted joints /
Published: (2025)

Stress corrosion cracking of reactor coolant pump bolts.
Published: (1990)

Square, hex, heavy hex, and askew head bolts and hex, heavy hex, hex flange, lobed head, and lag screws (inch series) /
Published: (2013)

Turn-of-the-nut tightening of anchor bolts /
by: Richards, Jason Halbert, 1979-
Published: (2004)

New-York Screw Bolt Mills.
Published: (1849)

Analysis of bolted joints-1999 : presented at the 1999 ASME Pressure Vessels and Piping Conference : Boston, Massachusetts, August 1-5, 1999 /
Published: (1999)

Analysis of bolted joints, 2000 : presented at the 2000 ASME Pressure Vessels and Piping Conference, Seattle, Washington, July 23-27, 2000 /
Published: (2000)

Bolt, nut and rivet standards /
Published: (1941)

Field verification of load transfer mechanics of fully grouted roof bolts /
by: Signer, S. P. (Stephen P.)
Published: (1990)

Tightening procedures for large-diameter anchor bolts /
Published: (1997)

Plow bolts.
Published: (1925)

Counterfeit bolts and fasteners : hearing before the Subcommittee on Science, Research, and Technology of the Committee on Science, Space, and Technology, U.S. House of Representatives, One Hundred First Congress, first session, April 5, 1989.
Published: (1989)

Bent anchor bolts in boiling water reactor torus supports.
Published: (1989)

Handbook of bolts and bolted joints /
Published: (1998)

Cracking of reactor vessel internal baffle former bolts in foreign plants.
Published: (1998)

Minimum edge distance for expansion anchor bolts.
Published: (1988)

Temperature investigations on resin-anchored bolts /
by: Stateham, Raymond M.
Published: (1976)

Hilti concrete expansion anchor bolts.
Published: (1986)

"Bolting degration or failure in nuclear power plants".
Published: (1991)

Use of seal cap enclosures to mitigate leakage from joints that use A-286 bolts.
Published: (2012)

Strength of bolted timber connections with steel side members /
by: Wilkinson, Thomas Lee
Published: (1992)

[Lewis bolts and boxes of naval vessels, instructions for fitting].
Published: (1891)

Specification for structural joints using ASTM A325 or A490 bolts /
Published: (1980)

Modern machine shop's guide to threads, threading, and threaded fasteners /
by: Chapman, Woodrow W. (Woodrow Wilson), 1944-
Published: (2004)

Counterfeit metal fasteners : hearings before the Subcommittee on Oversight and Investigations of the Committee on Energy and Commerce, House of Representatives, One Hundredth Congress, first session, July 31, August 5, and October 19, 1987.
Published: (1988)

Strength and behavior of bolt installations anchored in concrete piers /
Published: (1984)