Cover Image

Supersonic inlets /

Bibliographic Details
Main Author:	Faro, Ione D. V.
Corporate Author:	North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development
Format:	Book
Language:	English
Published:	[Paris] : North Atlantic Treaty Organization, Advisory Group for Aerospace Research and Development, 1965.
Series:	AGARDograph ; no. 102.
Subjects:	Jet engines > Air intakes. Supersonic diffusers.

Similar Items

Air intake problems in supersonic propulsion ; invited papers presented at the 11th AGARD Combustion and Propulsion Panel meeting, Paris, December 1956 /
Published: (1958)

Wind-tunnel tests on a rectangular, twin-duct, variable-geometry air intake : at supersonic speeds /
by: Dobson, M. D.
Published: (1967)

Tests with a two-dimensional intake having all-external compression and a design mach number of 2.2 [as printed, as printed]. /
by: Neale, M. C.
Published: (1967)

The performance of some axisymmetric isentropic centrebody intakes designed for mach numbers of 2.48 and 3.27 /
by: Goldsmith, E. L.
Published: (1969)

Low-speed performance of an axisymmetric, mixed-compression, supersonic inlet with auxiliary inlets /
by: Trefny, Charles J., et al.
Published: (1986)

Analysis of experimental results of the inlet for the NASA hypersonic research engine aerothermodynamic integration model /
by: Andrews, Earl H., et al.
Published: (1976)

The effect of internal contraction, initial rate of subsonic diffusion, and cowl and contrebody shape on the pressure recovery of a conical-centrebody intake at supersonic speeds /
by: Goldsmith, E. L.
Published: (1962)

A supersonic tunnel design for testing engine intakes /
by: Staniforth, R.
Published: (1961)

Inlets for supersonic missiles /
by: Mahoney, John J.
Published: (1990)

Aerodynamic performance of flared fan nozzles used as inlets /
by: Dietrich, Donald A., et al.
Published: (1976)

Supersonic inlet diffusers and introduction to internal aerodynamics.
by: Hermann, Rudolf, 1904-
Published: (1956)

Boundary-layer interaction effects in intakes with particular reference to those designed for dual subsonic and supersonic performance /
by: Seddon, J.
Published: (1970)

More tests with a variable ramp intake having a design mach number of 2.2 /
by: Neale, M. C.
Published: (1967)

Tests with a two-dimensional intake having all-external compression and a design mach number of 2.2 /
by: Neale, M. C.
Published: (1967)

Some tests with a variable ramp intake having sidewall compression and a design mach number of 2.2 /
by: Neale, M. C.
Published: (1967)

Boundary-layer bleed system study for a full-scale, mixed-compression inlet with 45 percent internal contraction /
by: Shaw, Robert J. (Robert Joseph), 1946-, et al.
Published: (1976)

Computational design and optimization of supersonic intakes /
by: Sandhu, Jatinder Pal Singh, et al.
Published: (2025)

Design and operation of intermittent supersonic wind tunnels /
by: Ferri, Antonio, 1912-
Published: (1954)

Thrust performance of isolated two dimension suppressed plug nozzles with and without ejectors at mach numbers from 0 to 0.45 /
by: Harrington, Douglas E., et al.
Published: (1976)

An experimental investigation of the flow through inclined circular tubes at a mach number of 4.0,
by: Roe, P. L.
Published: (1966)

Practical intake aerodynamic design /
Published: (1993)

Investigation of two bifurcated-duct inlet systems from Mach 0 to 2.0 over a wide range of angles of attack /
by: Latham, Eldon A.
Published: (1976)

Intake aerodynamics /
Published: (1999)

The use of air injection to prevent separation of the turbulent boundary layer in supersonic flow /
by: Peake, D. J.
Published: (1967)

Tests on an engine installation for a slender gothic wing at M-1.82 /
by: Griffiths, R. T.
Published: (1967)

Noise suppression by an acoustically treated three-ring inlet on a TF-34 engine /
by: Minner, Gene L., et al.
Published: (1976)

Airframe/propulsion interference.
Published: (1975)

On the static performance of two-dimensional intakes with momentum injection in the form of boundary-layer control by blowing /
by: Gregory, Nigel
Published: (1971)

Incidence angle bounds for lip flow separation of the 13.97-centimeter-diameter inlets /
by: Luidens, Roger W., et al.
Published: (1976)

Minimum weight design of a generic axisymmetric inlet /
by: Nadell, Shari-Beth
Published: (1996)

Conceptual design of a supersonic business jet propulsion system /
by: Bruckner, Robert J.
Published: (2002)

Conceptual design of a supersonic business jet propulsion system /
by: Bruckner, Robert J.
Published: (2002)

Measurement of the internal drag of air breathing installations on slender wing-body combinations at supersonic speeds /
by: Britton, J. W.
Published: (1967)

Noise correction for supersonic inlet geometry /
by: Stephens, David B. (David Bruce)
Published: (2022)

A numerical investigation of supersonic jet interaction for finned bodies /
Published: (2000)

Compilation and review of supersonic business jet studies from 1963 through 1995 /
by: Maglieri, Domenic J.
Published: (2011)

Dynamics and Structure of Supersonic Multi-Phase Reacting Flows /
by: Dammati, Sai Sandeep
Published: (2023)

Further tests with a variable ramp intake having a design Mach number of 2.2 /
by: Neale, M. C.
Published: (1966)

Characteristic pressure distribution in outlet works inlets /
by: Cox, Robert George, et al.
Published: (1969)

Computational analysis of a low-boom supersonic inlet /
by: Chima, Rodrick V.
Published: (2011)