Residual stresses in metals and metal construction.

Guide for interpretation of nondestructive tests of ordinary-, medium-, and high-strength, low-alloy steel weldments in ship hull structures : final technical report on project SR-197 /
Published: (1977)

American ships : their past and future, and the question of wood or iron for their construction, reviewed /
by: Bates, William Wallace, 1827-
Published: (1870)

Final report of a Board of investigation convened by order of the Secretary of the Navy to inquire into the design and methods of construction of welded steel merchant vessels : July 15, 1946.
Published: (1947)

Stress relief of weldments for machining stability /
by: Stitt, James Raymond, 1906-
Published: (1944)

Wooden ships superseded by iron : Cheap iron indispensable for the revival of American commerce : A commercial marine essential to national progress and defence.
Published: (1869)

Ship repair and alteration /
by: Haliday, George Vincent, 1906-
Published: (1942)

Welding mechanization and automation in shipbuilding worldwide /
by: Boekholt, Richard
Published: (2011)

Nondestructive inspection of longitudinal stiffener butt welds in commercial vessels.
by: Youshaw, R.
Published: (1980)

Optimum weld-metal strength for high strength ship structures /
Published: (1995)

Residual stresses in welded construction and their effects : an international conference [held in] London, 15-17 November 1977 /
Published: (1978)

Guide for steel hull welding /
Published: (1985)

Guide for steel hull welding /
Published: (1976)

The calculations for steel-frame structures : designed to comply with the requirements of the London County Council (General Powers) Act, 1909, with notes on the application of theory to practical design /
by: Cocking, Walter Cyril
Published: (1925)

Regulirovanie napri︠a︡zheniĭ v metallicheskikh proletnykh stroenii︠a︡kh mostov /
by: Tolmachev, Konstantin Khrisanfovich
Published: (1960)

The effect of strain rate on the toughness of ship steels /
by: Francis, Philip H.
Published: (1978)

Review of fillet weld strength parameters for shipbuilding.
Published: (1980)

Summary of nondestructive inspection standards for heavy section castings, forgings, and weldments.
by: Youshaw, R.
Published: (1981)

Ship repair and alteration /
by: Haliday, George Vincent, 1906-, et al.
Published: (1942)

Hull welding manual /
Published: (1962)

Metallic materials : determination of forming-limit curves for sheet and strip.
Published: (2020)

Brittle fracture of welded plate /
Published: (1967)

Investigation of bridge impacts with a mechanical oscillator.
by: West, Charles Tyrrell
Published: (1948)

Fatigue of welded steel bridge members under variable-amplitude loadings /
Published: (1978)

Updating of fillet weld strength parameters for commercial shipbuilding.
Published: (1984)

Inspection, repair and maintenance of ship structures /
by: Caridis, P. A.
Published: (2001)

Weld defect tolerance study : final report /
by: Sandor, Leslie W
Published: (1981)

Stresses in structural steel angles, with special tables /
by: Waterbury, L. A. (Leslie Abram), 1880-1918
Published: (1917)

Residual stress measurements /
Published: (1952)

Evaluation of residual stress.
by: Heindlhofer, Kalman
Published: (1948)

Analysis and optimum design of metal structures /
by: Farkas, József, 1944-
Published: (1997)

Report on hogging and sagging tests on riveted tanker M.V. "Newcombia" /
Published: (1948)

Weld stresses beyond elastic limit : materials discontinuity /
by: Verderaime, V.
Published: (1989)

Subcritical crack growth and fracture of bridge steels /
by: Barsom, John M., 1938-
Published: (1977)

Metallic materials : determination of forming-limit curves for sheet and strip.
Published: (2021)

Stress concentrations in structural steel pipe due to the presence of a single circular hole /
by: O'Neal, Nolan A. (Nolan Arthur), 1960-
Published: (1986)

Analysis of welded structures : residual stresses, distortion, and their consequences /
by: Masubuchi, Koichi, 1924-2016
Published: (1980)