Analysis and testing for rotordynamic coefficients of grooved turbulent annular seals /

Analysis of eccentric annular pressure seals : a new solution procedure for determing reactive force and rotordynamic coefficients /
by: Nguyen, Dung Thanh, 1959-
Published: (1988)

A comparison of experimental and theoretical results for leakage, pressure distribution, and rotordynamic coefficients for annular gas seals /
by: Nicks, Colby Oran, 1960-
Published: (1984)

A comparison of experimental and theoretical results for rotordynamic coefficients for labyrinth gas seals /
by: Scharrer, Joseph Kirk, 1962-
Published: (1985)

Rotordynamic force coefficients of pocket damper seals /
by: Ertas, Bugra Han, 1975-
Published: (2005)

Rotordynamic analysis of annular honeycomb-stator turbulent gas seals using a new friction-factor model based on flat plate tests /
by: Ha, Tae Woong
Published: (1992)

A new method for determining rotordynamic forces on liquid annular seals /
by: Hensel, S. J. (Steve John), 1962-
Published: (1990)

Mean flow and turbulence characteristics in whirling annular seals /
by: Thames, Howard Davis, III, 1967-
Published: (1992)

A comparison of theoretical and experimental rotordynamic coefficients for helically grooved annular gas seals /
by: Gansle, Anthony Joseph, 1968-
Published: (1993)

Experimental versus theoretical comparison of the effects of taper and static eccentricity on the rotordynamic coefficients of short, smooth, high-speed, liquid annular seals /
by: Lindsey, William Todd, 1969-
Published: (1993)

A comparison of theoretical and experimental rotordynamic coefficients for a smooth gas seal at eccentric operation /
by: Alexander, Christopher Richard, 1968-
Published: (1993)

Measurements of leakage, power loss and rotordynamic force coefficients in a hybrid brush seal /
by: Baker, Jose Enrique
Published: (2010)

Comparison of the leakage characteristics of the straight annular and convergent seals.
by: Ustun, Serafettin
Published: (2012)

Test versus predictions for rotordynamic and leakage characteristics of a convergent-tapered, honeycomb-stator/smooth-rotor annular gas seal /
by: Van Der Velde Alvarez, Daniel Eduardo
Published: (2010)

Measurements versus predictions for rotordynamic coefficients and leakage rates for a novel hole-pattern gas seal /
by: Seifert, Brent Alan, 1980-
Published: (2007)

A comparison of experimental results and theoretical predictions for the rotordynamic and leakage characteristics of short (L/D=1/6) honeycomb and smooth annular pressure seals /
by: Kleynhans, George Frederick, 1966-
Published: (1991)

A comparison of experimental results and theoretical predictions for the rotordynamic coefficients of short (L/D = 1/6) labyrinth seals /
by: Pelletti, Joseph Michael
Published: (1990)

A linear fluid inertia model for improved prediction of force coefficients in grooved squeeze film dampers and grooved oil seal rings /
by: Delgado-Marquez, Adolfo
Published: (2010)

Theory versus experiment of the rotordynamic and leakage characteristics of smooth annular bushing oil seals /
by: Culotta, Vittorio G, 1975-
Published: (2005)

Measurement versus predictions of rotordynamic coefficients and leakage rates for a hole-pattern gas seal with negative preswirl /
by: Brown, Philip David
Published: (2012)

Effect of a straight teeth-on-rotor labyrinth seal on rotordynamics /
by: Zierer, Joseph John, Jr., 1967-
Published: (1991)

The influence of a central groove on static and dynamic characteristics of an annular liquid seal with laminar flow /
by: Graviss, Matthew Sheridan, 1981-
Published: (2005)

Test versus predictions for rotordynamic coefficients and leakage rates of hole-pattern gas seals at two clearances in choked and unchoked conditions /
by: Wade, Jonathan Leigh, 1979-
Published: (2004)

Rotordynamic coefficients and leakage flow of parallel-grooved liquid-seals /
by: Kilgore, James Joseph
Published: (1988)

Experimental measurement and analysis of wall pressure distribution for a 50% eccentric whirling annular seal /
by: Suryanarayanan, Arun, 1976-
Published: (2003)

Leakage and rotordynamic effects of pocket damper seals and see-through labyrinth seals /
by: Gamal Eldin, Ahmed Mohamed, 1977-
Published: (2008)

Rotordynamic and leakage characteristics of a 4-stage brush seal /
by: Conner, Kelly James
Published: (1990)

Seal inlet disturbance boundary conditions for rotordynamic models and influence of some off-design conditions on labyrinth rotordynamic instability /
by: Xi, Jinxiang, 1974-
Published: (2007)

Dynamic Characterization of Annular Gas Seals With 3D Printed Texture Patterns /
by: Moody, Andrew Michael
Published: (2023)

Rotordynamics/discharge water-hammer coupling via seals in pump rotordynamics.
by: Zhang, Kaikai
Published: (2004)

Modifications to a two-control-volume, frequency dependent, transfer-function analysis of hole-pattern gas annular seals /
by: Shin, Yoon Shik, 1976-
Published: (2007)

Experimental measurement of phase averaged wall-pressure distributions for a 25% eccentric whirling annular seal /
by: Cusano, Domenic, 1982-
Published: (2006)

Measured results for a new hole-pattern annular gas seal incorporating larger diameter holes, comparisons to results for a traditional hole-pattern seal and predictions /
by: Vannarsdall, Michael Lloyd
Published: (2012)

Parameters defining flow resistance and the friction factor behavior in liquid annular seals with deliberately roughened surfaces /
by: Villasmil Urdaneta, Larry Alfonso, 1966-
Published: (2006)

Sealing systems for compressors /
by: Lesiecki, Gerald

Experimental dynamic forced performance of a centrally grooved, end sealed squeeze film damper /
by: Mahecha Mojica, Lady Paola
Published: (2011)

A comparison of rotordynamic-coefficient predictions for annular honeycomb gas seals using different friction-factor models /
by: D'Sousa, Rohan Joseph, 1974-
Published: (2000)