Formability topics--metallic materials : a symposium /

Plane strain crack toughness testing of high strength metallic materials /
by: Brown, William F., 1922-
Published: (1966)

Impact testing of metals.
Published: (1970)

Surface stressing of metals /
Published: (1947)

Metal properties for the petroleum and chemical industries : presented at International Joint Petroleum Mechanical Engineering and Pressure Vessel and Piping Conference, Mexico City, Mexico, September 19-24, 1976 /
Published: (1976)

Hydrogen embrittlement testing ; a symposium presented at the seventy-fifth annual meeting, American Society for Testing and Materials, Los Angeles, Calif., 25-30 June 1972 /
Published: (1974)

Properties of metals at elevated temperatures /
by: Smith, G. V. (George V.), 1916-
Published: (1950)

Determination of the mechanical and technological properties of metals /
by: Gliner, B. M.
Published: (1960)

Inspection of metals /
by: Anderson, Robert Clark
Published: (1983)

Testing of metals /
by: Simons, Eric N.
Published: (1972)

Creep of metals /
by: Tapsell, Herbert James
Published: (1931)

Mechanical testing of metallic materials : with special reference to proof stress /
by: Beaumont, Reginald Arthur, 1905-
Published: (1944)

Techniques for multiaxial creep testing /
Published: (1986)

Strength and resistance of metals.
by: Lessells, John Moyes, 1888-
Published: (1954)

Symposium on newer metals ; presented at the third Pacific area national meeting. San Francisco, Calif., October 15 and 16, 1959.
Published: (1960)

Elevated-temperature testing of metals : [by] A. M. Borzdyka /
by: Borzdyka, A. M.
Published: (1965)

The hardness of metals and its measurement /
by: O'Neill, Hugh E.
Published: (1934)

High temperature properties of metals /
Published: (1951)

High temperature properties of metals /
Published: (1951)

Review of developments in plane strain fracture toughness testing /
Published: (1970)

Test methods for compression members ; a symposium presented at the sixty-ninth annual meeting, American Society for Testing and Materials, Atlantic City, N. J., 16 June-1 July, 1966.
Published: (1967)

The hardness of metals.
by: Tabor, David
Published: (1951)

Hardness of metals /
by: Lea, F. C. (Frederick Charles), 1871-1952
Published: (1936)

The hardness of metals /
by: Tabor, David
Published: (2000)

Determination of the mechanical and technological properties of metals /
by: Gliner, Boris Moiseevich
Published: (1960)

The non-destructive testing of metals.
by: Hanstock, R. F.
Published: (1951)

Hardness measurement of metals and alloys.
by: O'Neill, Hugh, 1899-
Published: (1967)

Hydrogen transport and cracking in metals : proceedings of a conference held at the National Physical Laboratory, Teddington, UK, 13-14 April 1994 /
Published: (1995)

Fracture toughness testing at cryogenic temperatures.
Published: (1971)

Hydrogen embrittlement : prevention and control /
Published: (1988)

Symposium on internal stresses in metals and alloys /
Published: (1948)

Electronic methods of inspection of metals /
Published: (1947)

Prevention of the failure of metals under repeated stress : a handbook prepared for the Bureau of aeronautics, Navy department, by the staff of Battelle memorial institute, under the auspices of the National research council of the National academy of sciences.
Published: (1941)

Response of metals to high velocity deformation ; proceedings of a technical conference, Estes Park, Colorado, July 11-12, 1960 /
Published: (1961)

Behavior of metals under impulsive loads /
by: Rinehart, John S., 1915-1999
Published: (1965)

Prevention of structural failure : the role of quantitative nondestructive evaluation /
Published: (1975)

The plastic deformation of metals /
by: Honeycombe, R. W. K. (Robert William Kerr)
Published: (1968)