Turbine blade cooling : January 12-16, 1976.

Advances in wind turbine blade design and materials /
Published: (2013)

The procurement of replacement steam turbine blading : (from original equipment manufacturers and alternate suppliers) /
by: Sanders, William P.
Published: (1997)

Vibrat︠s︡ionnai︠a︡ prochnostʹ lopatok turbin /
by: Papchenko, Ivan Ivanovich
Published: (1959)

Acoustic emission signal analysis and damage mode identification of composite wind turbine blades /
by: Liu, Pengfei
Published: (2023)

Heat transfer near the entrance to a film cooling hole in a gas turbine blade /
by: Byerley, Aaron R.
Published: (1989)

Aėrodinamicheskoe sovershenstvovanie lopatochnykh apparatov parovykh i gazovykh turbin /
Published: (1960)

Structure design for wind turbine blade /
by: Wang, Tongguang, et al.
Published: (2019)

Hybrid anisotropic materials for wind power turbine blades /
by: Golfman, Yosif
Published: (2012)

Raschet aėrodinamicheskikh kharakteristik lopatochnogo apparata turbomashin /
by: Markov, Nikolaĭ Mikhaĭlovich
Published: (1955)

An experimental study of the effect of wake passing on turbine blade film cooling /
by: Heidmann, James D.
Published: (1997)

Heat transfer in the trailing edge cooling channels of turbine blades /
by: Kumaran, T. K., 1964-
Published: (1989)

Turbomachine blade vibration /
by: Rao, J. S.
Published: (1991)

Bladed disk assemblies : presented at the 1987 ASME Design Technology Conferences - 11th Biennial Conference on Mechanical Vibration and Noise, Boston, Massachusetts, September 27 - 30, 1987 /
Published: (1987)

Gas turbine blade cooling /
Published: (2018)

Note on the concept of blunt trailing edge blades /
by: Chauvin, Jacques
Published: (1967)

Vibrations of blades and bladed disk assemblies : presented at the Tenth Biennial Conference on Mechanical Vibration and Noise, Cincinnati, Ohio, September 10-13, 1985 /
Published: (1985)

Protective coatings for turbine blades /
by: Tamarin, Y.
Published: (2002)

Theory and tunnel tests of rotor blades for supersonic turbines /
by: Stratford, B. S.
Published: (1962)

Blading design for axial turbomachines.
Published: (1989)

Blade design and analysis for steam turbines /
by: Singh, Murari P.
Published: (2012)

Turbomachinery blade design systems : February 8-12, 1999 /
Published: (1999)

Turbine blade tip design and tip clearance treatment : January 19-23, 2003 /
Published: (2004)

Tests on an experimental three-stage turbine fitted with low reaction blading of unconventional form /
by: Johnston, I. H.
Published: (1961)

Computer model for gas turbine blade cooling; including a comparison of steam to air as a cooling medium /
by: Ortman, Daniel William, 1956-
Published: (1982)

Numerical methods for flows in turbomachinery bladings : April 26-30, 1982.
Published: (1982)

The effect of load phase angle on wind turbine blade fatigue damage : preprint /
by: White, D. L.
Published: (2003)

Structural design of a horizontal-axis tidal current turbine composite blade /
by: Bir, Gunjit S.
Published: (2011)

Heat transfer and flow characteristics of cooling channels in turbine blades /
by: Saxena, Amit, 1964-
Published: (1988)

Titanium steam turbine blading : workshop proceedings, Palo Alto, California, 9-10 November 1988 /
Published: (1990)

Probabilistic analysis of bladed turbine disks and the effect of mistuning /
by: Shah, A. R.
Published: (1990)

Blade row interference effects in axial turbomachinery stages : February 9-12, 1998 /
Published: (1998)

Titanium steam turbine blading : workshop proceedings, Palo Alto, California, 9-10 November 1988 /
Published: (1990)

Turbine design : the effect on axial flow turbine performance of parameter variation /
by: Fielding, Leslie
Published: (2000)

Numerical techniques for viscous flow calculations in turbomachinery bladings : January 20-24, 1986 /
Published: (1986)

Wind turbine blade finishing automation : robotic toolpath generation /
by: Nichols, Casey
Published: (2021)

Blade design and analysis for steam turbines /
by: Singh, Murari P.
Published: (2011)