A study of form factors for generated gear teeth.

A model of end milling dynamics geared towards the prediction of chatter /
by: Berrios, Ivan
Published: (1999)

Specific grinding energy causing thermal damage in helicopter gear steels /
by: Purushothaman, Ganesh Kumaran, 1974-
Published: (2001)

Specific grinding energy causing thermal damage in precision gear steels /
by: Hatathodi, Srinivas, 1979-
Published: (2002)

A photoelastic investigation of the bending moment on a gear tooth due to a concentrated load.
by: Sun, Pu-Ning
Published: (1960)

Gear coupling effects on rotordynamics /
by: Clark, Robert Warren, 1963-
Published: (1988)

A study of various design factors which affect the performance of attic ventilating fans.
by: Hunt, Myron Clyde
Published: (1940)

The effect of teeth-on-stator labyrinth seals on rotor imbalance response /
by: Conway, Eileen Marie
Published: (1991)

Characterization of coal-water slurry fuel sprays generated by an electronically-controlled accumulator fuel injector /
by: Payne, Stephen Ellis
Published: (1993)

Effect of a straight teeth-on-rotor labyrinth seal on rotordynamics /
by: Zierer, Joseph John, Jr., 1967-
Published: (1991)

The effects of torsional-lateral coupling on the dynamics of a gear coupled rotor /
by: Emery, Michael Aaron, 1979-
Published: (2007)

Modeling and control of a robot manipulator joint driven through a worm gear transmission /
by: May, Douglas Conrad
Published: (1990)

A simplied approach for generating frequency domain bounds for QFT designs /
by: Kyle, Eric Jacque, 1973
Published: (1998)

Experimental study of the mechanics of laser generated broad and narrow band surface waves for characterizing surface and near surface layers /
by: Duffer, Charles Edward, 1966-
Published: (1998)

Effects of friction factor and slip factor on the performance of a centrifugal slurry pump /
by: Sheth, Ketankumar Kantilal, 1959-
Published: (1985)

A study of the operative effects of various unrefined heavy petroleum hydrocarbons on a variable speed standard diesel engine.
by: Ellis, Clyde Virgil, 1908-
Published: (1932)

Investigation of gas species generation by electrically exploding wires at low pressure.
by: Bagnall, Leslie Merlin
Published: (1969)

An investigation of factors related to the design of prototype process equipment for the enzymatic processing of fish.
by: Shah, Suresh Somalal
Published: (1964)

Understanding the friction factor behavior in liquid annular seals with deliberately roughened surfaces, a CFD approach /
by: Villasmil Urdaneta, Larry Alfonso
Published: (2002)

An investigation of the strains in an integral type oil-well tubing joint, and the factors affecting leakage.
by: Atterbury, John Henry
Published: (1950)

Radiant heat transfer between gray surfaces forming an enclosure.
by: Lawrence, James Harold
Published: (1965)

A comparison of rotordynamic-coefficient predictions for annular honeycomb gas seals using different friction-factor models /
by: D'Sousa, Rohan Joseph, 1974-
Published: (2000)

Asymmetric gearing /
by: Kapelevich, Alexander L.
Published: (2018)

Analysis of Oil Lubricated Thrust Collars for Application in Integrally Geared Compressors /
by: Cable, Travis Alexander
Published: (2015)

Determination of variation of friction factor with Reynolds number for flow between two closely spaced rough flat plates /
by: Thomas, Jason
Published: (1992)

Theoretical full power correction factors as related to changes in ambient temperature, pressure and absolute humidity for aircraft turbine engines.
by: Raphael, Michel Antoun
Published: (1969)

A study of fatigue in drill collars.
by: Fowler, Joe Robert
Published: (1969)

A study of a small supersonic wind tunnel.
by: Chang, Pu-Kwang
Published: (1967)

A photoelastic study of a beam on an elastic foundation.
by: Beckham, Paul Miles
Published: (1961)

A study of compound buoyancy and shear mixing /
by: Snider, Dale Marshall
Published: (1994)

A study of heat dissipation in lakes and ponds.
by: Taylor, Wesley Madison
Published: (1966)

Robot Locomotion Controller Generation Through Human Inspired Optimization /
by: Powell, Matthew Joseph
Published: (2014)

A study of a cooling tower with variable packing geometries.
by: Azad, Abul Kalam
Published: (1957)

A study of a cooling tower with variable packing heights.
by: Khan, A. M. M. Farid
Published: (1957)

An analytical study of pressure effect on the inversion temperature of gases and a comparison of equations of state on the basis of this study.
by: Sinha, Ramlakhan Prasad
Published: (1972)

The liquefied natural gas pipeline: a system study.
by: Hazel, Thomas Ray
Published: (1972)

A study of the heat dissipating capacity of journal bearings.
by: Mueller, Lester Alvie, 1916-
Published: (1939)