The use of experimental design in the control of continuous processes.

A process control chart for the detection of a change in the level parameter of the first and second order autoregressive processes /
by: Timmer, Douglas Harvey, 1963-
Published: (1994)

The use of the principle of expected value in engineering design.
by: Golondzinier, Theodore Matthew
Published: (1970)

An economic basis with inspector accuracy considerations for design of a multi-level continuous sampling plan.
by: Elliff, Gerald Allen
Published: (1973)

Designs for critical secondary control layouts for vehicles for the physically challenged /
by: Lostetter, Michael F.
Published: (1995)

Process planning : a formal modeling approach with an interface architecture for shop floor control /
by: Lee, Seongkyu, 1961-
Published: (1994)

Optimal control limit policy for a Partially Observable Markov Decision Process model /
by: Lee, Chong Ho, 1956-
Published: (1994)

Diagnosing manufacturing process variation using higher order statistics : a blind source separation approach /
by: Lee, Ho Young
Published: (2000)

Simplified and economical logic function control for small shop and education use.
by: LeTourneau, Richard Howard
Published: (1961)

Experimental and analytical investigations of an aeroelastic structure with continuous nonlinear stiffness /
by: O'Neil, Todd Gerald, 1971-
Published: (1996)

Design and construction of an experimental mass spectrometer.
by: Wall, Robert F.
Published: (1950)

Experimental Investigation and Modeling of Powder-bed Additive Manufacturing Processes /
by: Li, Ming
Published: (2023)

An investigation of production control using work-in-process as a control variable /
by: Skeith, William Edward, 1951-
Published: (1988)

Robust multiple-response system design using computer simulation experiments /
by: Han, Jiwon
Published: (1995)

Robust design of control charts for autocorrelated processes with model uncertainty /
by: Lee, Hyun Cheol, 1973-
Published: (2005)

The economical use of standby equipment for a typical Kraft process pulp and paper mill.
by: Cox, Elmer Adrain
Published: (1955)

An experimental application of Delphi to assist in the formulation of water resource objectives in San Antonio.
by: Pitman, John Kirby
Published: (1972)

A development and analysis of multiple-range techniques for controlling the variability of a process characteristic with a uniform distribution.
by: Abeyta, Richard Dan
Published: (1974)

Cost optimization of a trickling filtration process using pattern search and gradient summation techniques.
by: Elliff, Gerald Allen
Published: (1971)

Dynamic storage of continuous products under volume constraints.
by: Lewis, Harry Swift
Published: (1968)

The simulation and analysis of continuous single product manufacturing systems.
by: Snyder, Theodore Robert
Published: (1974)

A new Lyapunov design method for nonlinear process control /
by: Dubljevic, Stevan, 1971-
Published: (2001)

Monitoring process dispersion /
by: Acosta Mejia, Cesar Alfonso
Published: (1996)

Reservoir characterization using experimental design and response surface methodology /
by: Parikh, Harshal, 1978-
Published: (2003)

Optimal inventory methods - present worth and continuous compounding considered.
by: Misra, Ram Behari
Published: (1973)

Weighted control systems.
by: Al-Radhi, Adhi Omar
Published: (1974)

The design, construction, and testing of an experimental reverberation chamber.
by: Smahlik, Henry Joseph
Published: (1975)

The development of maximum moment coefficients for use in the design of three span continuous girders.
by: Thompson, Louis Jean
Published: (1951)

Monitoring for changes in parameters of Weibull processes /
by: Kang, Hunku, 1959-
Published: (1997)

Human factors in the moving merge process.
by: Kirk, Billy Mac
Published: (1969)

The design of squaring compensators for the feedback control of nonsquare processes /
by: Cole, Jerome David, 1953-
Published: (1989)

Control limits for dependent observations.
by: Tommerup, Jocelyn Anthea
Published: (1974)

Development of a GPC control strategy for a continuous frying process based on product quality attributes /
by: Brescia, Lorenzo Emiliano, 1971-
Published: (1996)

The design, construction, and control of a wheeled robot vehicle /
by: Ekiriwang, Tevo, 1959-
Published: (1986)

Development of an NC equipment level controller in a hierarchical shop floor control system /
by: Chang, William, 1963-
Published: (1993)

Design of noninteracting control systems using root locus methods.
by: Green, Walter Luther
Published: (1965)

Strategic control of multichannel bulk server diffusion/oxidation processes /
by: Fowler, John Welsh
Published: (1990)