A study of a small supersonic wind tunnel.

Projectile propulsion through a porous supersonic nozzle with application to airguns /
by: Russell, Ronnie David
Published: (1996)

Transonic throat flow in radial or nearly radial supersonic nozzles /
by: Carroll, Bruce Frederick, 1960-
Published: (1984)

A study of short-shroud supersonic ejectors with unsteady secondary conditions /
by: Bachman, Frank Gerald
Published: (1989)

A photoelastic investigation of the bending moment on a gear tooth due to a concentrated load.
by: Sun, Pu-Ning
Published: (1960)

Investigation of stresses in a plate containing circular holes.
by: Sun, Pu-Ning
Published: (1964)

1-by 1- foot supersonic wind tunnel sidewall flowfield compression plate study /
by: Peters, Christopher J. (Christopher John), et al.
Published: (2020)

Development of a digital controller for a vertical wind tunnel (VWT) prototype to mitigate ball fluctuations /
by: Silva, Ramón Alejandro
Published: (2011)

Transsonic and supersonic wind-tunnel facilities.
Published: (1949)

Supersonic wind tunnel nozzles : a selected, annotated bibliography to aid in the development of quiet wind tunnel technology /
by: Wolf, Stephen W. D.
Published: (1990)

Determination of the optimum air supply for the operation of a small cupola.
by: Manchester, Luther L., Jr
Published: (1948)

An experimental, theoretical and numerical investigation of corona wind heat transfer enhancement /
by: Owsenek, Brian Leonard, 1970-
Published: (1993)

Boiling in small diameter tubes.
by: Narasimhan, Nadipuram Desikachar
Published: (1973)

A difference equation model for radial flow at small Reynolds number.
by: Goldsberry, Fred Lynn
Published: (1969)

Performance of a small scale boiler burner in the firing of fuel blends /
by: Frazzitta, Stephen, 1968-
Published: (1993)

Investigations and experiments in Guidonia supersonic wind tunnel.
Published: (1939)

The 8 x 6 supersonic wind tunnel.
Published: (1994)

Design and operation of intermittent supersonic wind tunnels /
by: Ferri, Antonio, 1912-
Published: (1954)

A method of successive iterations on the state of stress in a homogeneous orthotropic and thermally excited plate.
by: Chang, Grenger Pei Yee
Published: (1973)

Experimental investigation of stress distribution in a beam on an elastic foundation by photoelasticity method.
by: Tsien, Vee-Chang
Published: (1948)

Design, construction, and performance of a small air conditioning unit for winter conditions.
by: Hansen, Carl Jasper, 1911-
Published: (1933)

Design, construction, and performance of a small air conditioning unit for summer conditions.
by: Reynolds, Jack Allen, 1909-
Published: (1933)

The flow of water through small orifices.
by: Lock, Jack Allen
Published: (1954)

Hydraulic analogy simulation of an internal supersonic jet discharging into a sudden enlargement /
by: Felling, Michelle Mary, 1967-
Published: (1992)

A photoelastic study of a beam on an elastic foundation.
by: Beckham, Paul Miles
Published: (1961)

A study of fatigue in drill collars.
by: Fowler, Joe Robert
Published: (1969)

Heat transfer analysis and evaluation for two-phase flow in porous-channel heat sinks /
by: Chang, Chang-Shen, 1961-
Published: (1996)

A pointwise approach for synthesizing semi-active control laws for vehicle suspension systems /
by: Chang, Pei-Ming, 1958-
Published: (1995)

A study of a cooling tower with variable packing geometries.
by: Azad, Abul Kalam
Published: (1957)

A study of a cooling tower with variable packing heights.
by: Khan, A. M. M. Farid
Published: (1957)

A study of compound buoyancy and shear mixing /
by: Snider, Dale Marshall
Published: (1994)

A study of heat dissipation in lakes and ponds.
by: Taylor, Wesley Madison
Published: (1966)

Study of heat transfer in attics with a small scale simulator /
by: Katipamula, Srinivas, 1960-
Published: (1985)

The liquefied natural gas pipeline: a system study.
by: Hazel, Thomas Ray
Published: (1972)

A study of the heat dissipating capacity of journal bearings.
by: Mueller, Lester Alvie, 1916-
Published: (1939)

A study of form factors for generated gear teeth.
by: Sims, Ellis Marcus, 1904-1991
Published: (1937)

A study of the economics of electric pipe line pumping.
by: Thomas, Julian Baldwin, 1891-
Published: (1930)