Cover Image

The relative effect of varying degrees of nozzle roughness on the flow of supersaturated steam.

Bibliographic Details
Main Author:	Maroski, William Powell
Format:	Thesis Book
Language:	English
Published:	[College Station, Tex.], [publisher not identified] ; 1949.
Subjects:	Major mechanical engineering.

Similar Items

An investigation of the flow of supersaturated steam.
by: Woolf, Jack Royce
Published: (1948)

The design and location of sampling nozzles for steam calorimeters.
by: Cather, Harold Malcolm, 1895-
Published: (1939)

Transonic throat flow in radial or nearly radial supersonic nozzles /
by: Carroll, Bruce Frederick, 1960-
Published: (1984)

Thermal analysis for axisymmetric nozzles.
by: Holder, Ronald Wilburn
Published: (1968)

Drying characteristics of slot jet reattachment nozzle and comparison with a slot jet nozzle /
by: Alam, Syed Aftab, 1969-
Published: (1998)

The effect of roughness on aerosol deposition in tubes /
by: Chavez, Mario Cesar
Published: (1997)

Comparison of heat transfer characteristics of axisymmetric and two dimensional reattachment jet nozzles to conventional jet impingement nozzles /
by: Narayanan, Vinod, 1973-
Published: (1997)

Combined numerical/analytical perturbation solutions of the Navier-Stokes equations for aerodynamic ejector/mixer nozzle flows /
by: De Chant, Lawrence Justin
Published: (1997)

A study of the self-oscillating jet impingement nozzle /
by: Chinnock, Paul Scott, 1968-
Published: (1993)

Bubble formation in supersaturated hydrocarbon mixtures.
by: Olson, Charles Robert
Published: (1950)

Pressure loss of air flowing through 45 degree, wooden louvers.
by: Cobb, Phil Ross
Published: (1953)

Projectile propulsion through a porous supersonic nozzle with application to airguns /
by: Russell, Ronnie David
Published: (1996)

The effects of surface roughness on the wave forces on a circular cylindrical pile.
by: Burton, William Joseph
Published: (1970)

Bubble formation in reservoir fluids at low supersaturations.
by: Wieland, Denton R.
Published: (1956)

Determination of variation of friction factor with Reynolds number for flow between two closely spaced rough flat plates /
by: Thomas, Jason
Published: (1992)

Thermal contact conductance of spherical, rough metals /
by: Lambert, Michael Andrew, 1966-
Published: (1995)

Enhanced impingement heat transfer using a Self-Oscillating Jet Impingement Nozzle array /
by: Heatly, Michael Mincen, 1968-
Published: (1995)

An analog computer study of the transition from fully developed turbulent smooth wall flow to fully developed turbulent rough wall flow in a two-dimensional channel.
by: Sheppard, Donald Max
Published: (1962)

Impingement characteristics of a combustion nozzle /
by: Dietz, Erik Carl, 1968-
Published: (1992)

Investigation of wall friction in noncircular ducts with a rough liner.
by: Tyler, John Charles
Published: (1959)

The determination of the turbulent intensities in a transitional flow from a smooth to a rough wall with zero pressure gradient in a two-dimensional channel.
by: Isalāma, Obāẏadula
Published: (1963)

Two linear slot nozzle virtual impactors for concentration of bioaerosols /
by: Haglund, John Steven, 1971-
Published: (2005)

Study of casing treatment effects in axial flow compressors.
by: Schiller, Robert Neil
Published: (1973)

A study of the turbulent intensities and correlation coefficients in the incompressible flow of air in transition from a smooth to a rough wall in a two-dimensional channel.
by: Carper, Herbert Jackson
Published: (1962)

Tip leakage control in axial-flow gas turbines /
by: Powell, David E.
Published: (1987)

Visualization of effect of turbulators on local heat transfer distribution in a 180 degree turn with liquid crystals /
by: Rajesh, Gopal
Published: (1994)

Numerical and experimental study on the effects of elbows upon the flow downstream /
by: Tung, Karine, 1975-
Published: (1998)

The effect of preceding elbows on aerosol deposition in subsequent flow elements /
by: Ramakrishna, Nagaraj, 1977-
Published: (2002)

The effects of preswirl on flow through centered and eccentric annular seals /
by: Shresta, Sanjiv, 1969-
Published: (1993)

Observations of friction factors for various roughness patterns in channel flow /
by: Nava, Deborah Lee
Published: (1993)

Effects of inlet geometries on flow recirculation in an axial-flow pump /
by: Alpan, Kenan, 1960-
Published: (1984)

Experimental study of the effects of wakes on separation in low pressure turbine flow /
by: Öztürk, Burak, 1977-
Published: (2003)

On the modeling of time-varying delays /
by: Shah, Chirag, 1978-
Published: (2004)

Analysis of an open crown conical shell segment for edge loadings and a linearly varying normal surface loading.
by: Hervey, Donald Gable
Published: (1965)

The effect of a 90⁰ elbow on the accuracy of liquid flow measurement with an insertion flowmeter /
by: Woo, Seongwoo, 1966-
Published: (2000)

Study of single degree-of-freedom restrained vibratory systems /
by: Nguyen, Dung Thanh, 1959-
Published: (1984)

Effects of the primary passage on the flow through the secondary passage of a shrouded-impeller pump /
by: Wyman, Nicholas James, 1969-
Published: (1994)

Heat transfer characteristics of circular impinging jet arrays in an annular section with cross flow effects /
by: Mhetras, Shantanu Prakash
Published: (2002)

Blade tip clearance effect on the performance and flow field of a three stage axial turbine /
by: Abdel-Fattah, Sharef Aly, 1978-
Published: (2003)

Effects of electric field on internal convective two-phase flow heat transfer and pressure drop /
by: Feng, Yinshan, 1974-
Published: (2002)