The relation of octane number, compression ratio, and exhaust temperature in the gasoline engine.

An investigation of the correlation between exhaust gas analysis, combustion efficiency and other operating characteristics of automobile engines.
by: Long, Wayne Eggleston, 1904-
Published: (1936)

A study of the design procedure and the performance characteristics of axial exhaust fans.
by: Barker, Gilbert Hamilton
Published: (1949)

Effect of recess pressure ratio on the characteristics of a hybrid bearing /
by: Ingram, Michael William, 1969-
Published: (1994)

An investigation of the change of Poisson's ratio during elastic-plastic transition.
by: Tsai, Ping Yung
Published: (1972)

The low-down on high octane gasoline.
Published: (2003)

Activation of hydrocarbons and octane number.
Published: (1939)

Experiments on the reduction of nitric oxide from exhaust gases by selective non-catalytic reactions /
by: Narney, John Kenneth, 1969-
Published: (1993)

The design, development and test of a device for automatically controlling the air-flow ratio for internal combustion engines using gaseous fuels.
by: Brewer, Alexander Van
Published: (1937)

Theoretical full power correction factors as related to changes in ambient temperature, pressure and absolute humidity for aircraft turbine engines.
by: Raphael, Michel Antoun
Published: (1969)

The effect of temperature on the compressibility of reservoir rocks.
by: Bahadur, Rajendra
Published: (1966)

Kinetic modeling of nitric oxide removal from exhaust gases by Selective Non-Catalytic Reduction /
by: Chenanda, Cariappa Mudappa, 1967-
Published: (1993)

Determination of the optimum iron-fuel ratio in a Whiting cupola using preheated air.
by: Covington, Wayne R.
Published: (1949)

A numerical study of compressible flow in labyrinth seals with rub grooves /
by: Adams, Richard Gordon
Published: (1997)

Two dimensional flow of a compressible gas in a thin passage.
by: Desai, Anantkumar Ratanji
Published: (1971)

An analysis of salt and moisture deposition on the air sampling probes in the exhaust shaft of the waste isolation pilot plant /
by: Weaver, Gregg Shelton, 1971
Published: (1996)

Blowing ratio effects on film cooling effectiveness /
by: Liu, Guojun
Published: (2010)

Effects of electrode compression on the performance of a solid polymer electrolyte fuel cell /
by: Del Campo, Christopher Scott, 1972-
Published: (1997)

Methods and modeling for the reduced platen compression of cancellous bone in the rodent proximal tibia /
by: Rogers, William Elliott, 1977-
Published: (2002)

The thermodynamic properties of mixtures of normal octane and branched paraffin hydrocarbons.
by: Liu, Edward Kou-Shan
Published: (1975)

Desalination using vapor-compression distillation /
by: Lubis, Mirna Rahmah
Published: (2010)

A correlation of rock compressibility with temperature and pressure.
by: Choudhary, B. K. (Bijoy Kumar)
Published: (1967)

High temperature press dryers for the paper industry /
by: Simonson, Eric
Published: (1992)

An examination of possible reversible combustion at high temperatures and pressures for a reciprocating engine /
by: Patrawala, Kaushik Tanvir
Published: (2010)

A study of numerical methods to solve quasi one-dimensional, unsteady, compressible viscous flow with shock /
by: Goy, Matthieu Pierre Bernard, 1970-
Published: (1994)

Instrumentation for the radio transmission of subsurface lake water temperature data.
by: Moench, Carroll Julius
Published: (1970)

An experimental investigation of high temperature, high pressure paper drying /
by: Patel, Kamal Raoji, 1971-
Published: (1994)

The photoelastic determination of the principal stresses in polygons having round central holes and subjected to a concentrated diagonal compressive load.
by: Priddy, Tommy Glynn
Published: (1961)

Isobutanol octane blending model with gasoline : cooperative research and development final report.
Published: (2021)

Design of high temperature high speed electromagnetic axial thrust bearing /
by: Mohiuddin, Mohammad Waqar, 1974-
Published: (2002)

An analog analysis of transient heat flow in solids with temperature-dependent thermal properties.
by: Lee, Dwain Edward
Published: (1964)

Temperature and velocity field mappings for micro-scale heat and mass transport phenomena /
by: Kim, Hyunjung, 1970-
Published: (2001)

Prediction of long-term strength of thermoplastic composites using time-temperature superposition /
by: Reeder, James Richard, 1964-
Published: (1998)

Second law analysis of premixed compression ignition combustion in a diesel engine using a thermodynamic engine cycle simulation /
by: Oak, Sushil Shreekant, 1984-
Published: (2008)

Prediction of compressible flow within concentric-rotor labyrinth seals /
by: Sobolik, Steven Ronald, 1960-
Published: (1984)

An experimental investigation of single and multiple pass high temperature, high pressure paper drying /
by: Simonson, Eric Howard, 1970-
Published: (1994)

The effect of pressure and temperature on pore volume compressibility of reservoir rock.
by: Cheng, Jsun Teh
Published: (1973)