A photoelastic investigation of the bending moment on a gear tooth due to a concentrated load.

Photoelastic determination of geometry factors for spur gear teeth.
by: Troxler, Joseph Roland
Published: (1965)

A photoelastic study of the bending stresses in an eccentrically curved beam.
by: Spanhel, Frank Velislav, Jr
Published: (1961)

A photoelastic stress analysis of a flat circular plate simply supported and subjected to a concentrated load at the center.
by: Fulbright, Joseph Lloyd
Published: (1958)

A photoelastic study of simply supported rectangular beams with holes on the vertical center lines and subjected to concentrated loads.
by: Lin, Ping Hua
Published: (1965)

A method of estimating the load for a three-dimensional photoelastic model.
by: Benefield, Allen Walter
Published: (1961)

A new high-speed, high-cycle, gear-tooth bending fatigue test capability /
Published: (2011)

A photoelastic investigation of the effects of rectangular openings at the neutral axis of beams subject to both bending and shear.
by: Schroeter, Donald Richard
Published: (1964)

A photoelastic investigation of shear and bending stresses in centrally loaded simple beams /
by: Frocht, Max Mark, 1894-1974
Published: (1937)

Investigation of stresses in a plate containing circular holes.
by: Sun, Pu-Ning
Published: (1964)

Allowable bending moment on a section of pipe loaded by internal pressure and axial force.
by: Smith, Stanford Alfred
Published: (1975)

A photoelastic study of rectangular beams in bending with a hole on the vertical center line.
by: Bailey, James Fletcher
Published: (1965)

Photoelasticity : Proceedings of the International Symposium on Photoelasticity, Tokyo, 1986 /
by: Nisida, Masataka
Published: (1986)

The photoelastic determination of the principal stresses in polygons having round central holes and subjected to a concentrated diagonal compressive load.
by: Priddy, Tommy Glynn
Published: (1961)

A photoelastic study of the stresses in simple beams due to a load applied to a pin through the beam on the vertical center line.
by: Overly, Charles Richard
Published: (1950)

Stress analysis, by photoelastic methods, of a rectangular bar subjected to a torsion load.
by: Rajagopalan, Tiruchengode Chinnappan
Published: (1961)

Distribution of stresses in a tapered cantilever beam due to a concentrated load at the end.
by: Wilhoit, James Cammack
Published: (1951)

A photoelastic study of the stress concentrations at the fillets in a closed end heavy wall cylinder.
by: Cloud, Robert Lea
Published: (1957)

Photoelasticity of glass /
by: Aben, Hillar
Published: (1993)

An investigation of Araldite 6060 as a model material for photoelastic stress analysis.
by: Anderson, Byron Hubert
Published: (1956)

An investigation of techniques for using a photometric device in two-dimensional photoelasticity.
by: Sadler, James Elmer
Published: (1963)

A photoelastic study of rectangular plates in tension with nonsymmetric loading through a single circular hole.
by: Love, Richard Meigs
Published: (1965)

Investigation of the buckling of columns by the photoelastic method of stress analysis /
by: Smith, Samuel H.
Published: (1961)

Photoelastic determination of the maximum stress in a circular plate having a square hole and subjected to diametral loading.
by: Seay, Crum Elwyn
Published: (1959)

A photoelastic study of a beam on an elastic foundation.
by: Beckham, Paul Miles
Published: (1961)

Experimental investigation of stress distribution in a beam on an elastic foundation by photoelasticity method.
by: Tsien, Vee-Chang
Published: (1948)

Stress analysis by photoelasticity /
by: Kothari, Mahesh A.
Published: (1967)

A photoelastic study of a simply supported rectangular beam loaded by a round pin through the center of the beam.
by: Morgan, Jerry Don
Published: (1964)

A photoelastic study of simply supported rectangular beams loaded by a round pin located on the vertical center line.
by: Lindsay, Hugh Warren
Published: (1965)

Methods for alleviating the photoelastic material situation.
by: Travis, Darol Duane
Published: (1956)

Measurement of gear tooth dynamic friction /
by: Rebbechi, Brian, et al.
Published: (1996)

Computerized inspection of gear tooth surfaces /
Published: (1989)

A photoelastic stress analysis of simply supported circular plates with holes in the centers and subjected to uniform loads along the inner edges.
by: Sweet, Harry Jerome
Published: (1958)

Computerized design and analysis of face-milled, uniform tooth height, spiral bevel gear drives /
by: Litvin, F. L. (Faydor L.), et al.
Published: (1996)

Investigation of sideband index response to prototype gear tooth damage /
by: Dempsey, Paula J.
Published: (2013)

A Photelastic study of stresses in gear tooth fillets /
by: Dolan, Thomas J. (Thomas James), 1906-
Published: (1942)

A study of the variation of the stress concentration due to an inclusion in a tensile specimen.
by: Coppinger, John Timothy
Published: (1967)