Regles de la C.E.I. pour les disjoncteurs a courant altarnatif /
| Corporate Author: | International Electrotechnical Commission |
|---|---|
| Format: | Book |
| Language: | French |
| Published: |
Geneve :
Bureau central de la C.E.I.,
1954-
|
| Edition: | 2. ed. |
| Series: | Publication (International Electrotechnical Commission) ;
56. |
| Subjects: |
Similar Items
Regles de la C.E.I. pour les coupe-circuit a fusibles pour tensions inferieures ou egales a 1000 V en courant continu et en courant alternatif = I.E.C. specification for fuses for voltages not exceeding 1000 V for A.C. and D.C.
Published: (1953)
Published: (1953)
Recommandations de la C.E.I. pour les transformateurs de puissance = I.E.C. recommendations for power transformers.
Published: (1955)
Published: (1955)
Handbook of the I-T-E circuit breaker. : Series M.
Published: (1919)
Published: (1919)
Tensions normales des reseaux de la C.E.I. /
Published: (1954)
Published: (1954)
Residual current devices : selection, operation and testing /
by: Czapp, Stanisław
Published: (2022)
by: Czapp, Stanisław
Published: (2022)
Regles de la C.E.I. pour les isolateurs en porcelaine pour lignes aeriennes de tension nominale egale ou superieur a 1000 volts = I.E.C. specification for porcelain insulators for overhead lines with a nominal voltage of 1000 volts and upwards.
Published: (1955)
Published: (1955)
Malomasli︠a︡nye podstant︠s︡ionnye vykli︠u︡chateli i privody k nim /
by: Gurvich, Veni︠a︡min Betsalelevich
Published: (1958)
by: Gurvich, Veni︠a︡min Betsalelevich
Published: (1958)
Rapport sur les travaux de la C.E.I. concernant les dimensions normales des moteurs electriques = Report on I.E.C. work on standard dimensions for electric motors.
Published: (1956)
Published: (1956)
High voltage oil circuit breakers /
by: Wilkins, Roy, 1887-
Published: (1930)
by: Wilkins, Roy, 1887-
Published: (1930)
Circuit breaking ; researches by the British Electrical and Allied Industries Research Association; a series of six lectures /
by: Trencham, Henry
Published: (1953)
by: Trencham, Henry
Published: (1953)
Power circuit breaker theory and design /
Published: (1982)
Published: (1982)
Power circuit breaker theory and design /
Published: (1975)
Published: (1975)
Recommandations de la C.E.I. relatives a la couleur des boutons-poussoirs = I.E.C. recommendations regarding the colour of push-buttons.
Published: (1955)
Published: (1955)
Licensee report of defective refurbished circuit breakers.
Published: (1988)
Published: (1988)
Preconditioning of molded-case circuit breakers before surveillance testing.
Published: (1996)
Published: (1996)
Electrical protective equipment and power-factor correction ; fire protection and fire fighting equipment /
by: Lincoln, E. S. (Edwin Stoddard), 1885-
Published: (1945)
by: Lincoln, E. S. (Edwin Stoddard), 1885-
Published: (1945)
Physics and engineering of high power switching devices /
by: Lee, Teng-hui
Published: (1975)
by: Lee, Teng-hui
Published: (1975)
Wire degradation at breaker cubicle door hinges.
Published: (2002)
Published: (2002)
Online circuit breaker monitoring system /
by: Djekic, Zarko, 1979-
Published: (2008)
by: Djekic, Zarko, 1979-
Published: (2008)
Risk based maintenance optimization using probabilistic maintenance quantification models of circuit breaker /
by: Natti, Satish
Published: (2010)
by: Natti, Satish
Published: (2010)
Online circuit breaker monitoring system /
by: Djekic, Zarko
Published: (2010)
by: Djekic, Zarko
Published: (2010)
Development studies of a solid-state d.c. circuit breaker based on the GTO /
by: Kernaghan, William Henry
Published: (1986)
by: Kernaghan, William Henry
Published: (1986)
Circuit interruption : theory and techniques /
Published: (1984)
Published: (1984)
Tripping of Klockner-Moeller molded-case circuit breakers due to support lever failure.
Published: (1993)
Published: (1993)
Problems with X-relays in DB- and DHB-type circuit breakers manufactured by Westinghouse.
Published: (1993)
Published: (1993)
High pressure arcs in industrial devices : diagnostic and monitoring techniques /
by: Jones, G. R. (Gordon Rees), 1938-
Published: (1988)
by: Jones, G. R. (Gordon Rees), 1938-
Published: (1988)
Misapplication and inadequate testing of molded-case circuit breakers.
Published: (1992)
Published: (1992)
Modification of vacuum breakers on Mark I containments.
Published: (1983)
Published: (1983)
The vacuum interrupter : theory, design, and application /
by: Slade, Paul G., 1941-
Published: (2008)
by: Slade, Paul G., 1941-
Published: (2008)
Vacuum arcs : theory and application /
Published: (1980)
Published: (1980)
Grease solidification causes molded case circuit breaker failure to close.
Published: (1993)
Published: (1993)
Konstrukt︠s︡ii vysokovolʹtnykh vykli︠u︡chai︠u︡shchikh apparatov peremennogo toka.
by: Afanasʹev, Vasiliĭ Vladimirovich
Published: (1951)
by: Afanasʹev, Vasiliĭ Vladimirovich
Published: (1951)
Circuit breaker failures due to loose charging spring motor mounting.
Published: (1988)
Published: (1988)
Time/current trip curve discrepancy of ITE/Siemens-Allis molded case circuit breaker.
Published: (1985)
Published: (1985)
Failure of Westinghouse W-2-type circuit breaker cell switches.
Published: (1987)
Published: (1987)
Potential failures of Westinghouse Electric Corporation type SA-1 differential relays.
Published: (1983)
Published: (1983)
Mechanical interference with thermal trip function in GE molded-case circuit breakers.
Published: (1990)
Published: (1990)
Mechanical binding of spring release device in Westinghouse type DS-416 circuit breakers.
Published: (1988)
Published: (1988)
inadequate work practices resulted in faulted circuit breaker connections.
Published: (2016)
Published: (2016)
Potential binding of Schneider Electric/Square-D Masterpact NT and NW 480-Vac circuit breaker anti-pump feature.
Published: (2017)
Published: (2017)