Creep of circular-section torsion-tension members subjected to nonproportionate load changes /

Evaluation of the elevated temperature tensile and creep-rupture properties of 3 to 9 percent chromium-molybdenum steels : prepared for the Metal Properties Council /
by: Smith, G. V. (George V.), 1916-
Published: (1975)

Evaluation of the elevated temperature tensile and creep-rupture properties of 1/2Cr-1/2Mo, 1Cr-1/2Mo, and 1 1/4Cr-1/2Mo-Si steels /
by: Smith, G. V. (George V.), 1916-
Published: (1973)

Cyclic creep of granular materials /
by: Holubec, I.
Published: (1969)

A comparison of tension and compression creep in a polymeric composite and the effects of physical aging on creep /
by: Gates, Thomas S., 1959-, et al.
Published: (1996)

Creep and creep-rupture behavior of wood-based structural panels /
by: Laufenberg, Theodore, et al.
Published: (1999)

Creep-resistant steels /
Published: (2008)

Creep induced behaviour of resurfaced pavements : some studies with the aid of beams subjected to a temperature wave and loaded under plane strain conditions /
by: Björklund, Anders
Published: (1984)

Creep and shrinkage of concrete based on major variables encountered in the state of Texas /
by: Ingram, Leonard L.
Published: (1973)

Creep in prestressed lightweight concrete /
by: Furr, Howard Lee
Published: (1967)

Creep-rupture tests of internally pressurized René 41 tubes /
by: Gumto, Klaus H., et al.
Published: (1972)

On-site evaluation of Creeping bentgrass for putting greens.
Published: (2002)

On-site evaluation of Creeping bentgrass for putting greens.
Published: (2001)

On-site evaluation of Creeping bentgrass for putting greens.
Published: (2000)

Techniques for multiaxial creep testing /
Published: (1986)

On-site evaluation of Creeping bentgrass for putting greens : progress report 2000 /
Published: (2001)

HDPE pipe : recommended material specifications and design requirements /
by: Hsuan, Y. G. (Yick Grace), 1956-
Published: (1999)

The behavior of an axially loaded drilled shaft under sustained loading /
by: Wooley, John A.
Published: (1974)

Techniques for multiaxial creep testing /
Published: (1986)

Flexural behavior of a prestressed welded steel beam /
by: Emanuel, Jack H.
Published: (1962)

Sources of variation in creep testing /
by: Loewenthal, William S.
Published: (2011)

Creep and shrinkage of concrete elements and structures /
by: Šmerda, Zdeněk
Published: (1988)

A creep model for metallic composites based on matrix testing : application to Kanthal composites /
Published: (1990)

A comparison of different methods of analysing dynamic creep test results / by T McL Smith.
by: Smith, T. McL
Published: (1996)

Investigation of high variability in the creep behavior of vectran yarn /
by: Langston, Sarah L., et al.
Published: (2021)

The creep of steel at high temperatures /
by: Norton, F. H. (Frederick Harwood), 1896-
Published: (1929)

Experience with creep-strength enhanced ferritic steels and new emerging computational methods : presented at the 2004 ASME/JSME Pressure Vessels and Piping Conference : San Diego, California, USA, July 25-29, 2004 /
Published: (2004)

Data analysis and correlation with digital computers--nondestructive testing /
by: Mann, Lawrence
Published: (1970)

Creep problems in structural members /
by: Rabotnov, :I:U. N., (:I:Uri:I Nikolaevich)
Published: (1969)

Development and use of static creep test to evaluate rut resistance of Superpave mixes /
by: Tam, Weng On, 1972-
Published: (2001)

Field test and preliminary design method for laterally loaded drilled shafts in clay /
by: Holloway, George L.
Published: (1978)

Fundamentals of creep in materials /
by: Kassner, Michael Ernest
Published: (2014)

Finite element analysis and design of large diameter flexible vertical pipes subjected to incremental compacted backfill loads and creep effects /
by: Hossain, Mohammad Kabir, 1958-
Published: (1990)

Determinaton of the relationship of free volume to mechanical behavior for an epoxy system subjected to various aging histories /
by: Ring, Darryl Steven
Published: (1979)

Creep and shrinkage properties in concrete containing fly ash /
by: Sennour, Mohand L.
Published: (1989)

Failure of components operating in the creep range : conference sponsored by the Pressure Vessels Section of the Applied Mechanics Group of the Institution of Mechanical Engineers, London, 27 April 1976.
Published: (1977)

Fundamentals of creep in metals and alloys /
by: Kassner, Michael Ernest
Published: (2004)