The effect of internal contraction, initial rate of subsonic diffusion, and cowl and contrebody shape on the pressure recovery of a conical-centrebody intake at supersonic speeds /

On the static performance of two-dimensional intakes with momentum injection in the form of boundary-layer control by blowing /
by: Gregory, Nigel
Published: (1971)

Computational design and optimization of supersonic intakes /
by: Sandhu, Jatinder Pal Singh, et al.
Published: (2025)

Supersonic inlets /
by: Faro, Ione D. V.
Published: (1965)

Wind-tunnel tests on a rectangular, twin-duct, variable-geometry air intake : at supersonic speeds /
by: Dobson, M. D.
Published: (1967)

Intake aerodynamics /
Published: (1999)

More tests with a variable ramp intake having a design mach number of 2.2 /
by: Neale, M. C.
Published: (1967)

Tests with a two-dimensional intake having all-external compression and a design mach number of 2.2 /
by: Neale, M. C.
Published: (1967)

Some tests with a variable ramp intake having sidewall compression and a design mach number of 2.2 /
by: Neale, M. C.
Published: (1967)

Practical intake aerodynamic design /
Published: (1993)

Tests with a two-dimensional intake having all-external compression and a design mach number of 2.2 [as printed, as printed]. /
by: Neale, M. C.
Published: (1967)

The effect of temperature on subsonic jet noise /
by: Cocking, B. J.
Published: (1975)

Low-speed performance of an axisymmetric, mixed-compression, supersonic inlet with auxiliary inlets /
by: Trefny, Charles J., et al.
Published: (1986)

Analysis of experimental results of the inlet for the NASA hypersonic research engine aerothermodynamic integration model /
by: Andrews, Earl H., et al.
Published: (1976)

Intake aerodynamics /
Published: (1999)

Aerodynamic performance of flared fan nozzles used as inlets /
by: Dietrich, Donald A., et al.
Published: (1976)

Thrust performance of isolated two dimension suppressed plug nozzles with and without ejectors at mach numbers from 0 to 0.45 /
by: Harrington, Douglas E., et al.
Published: (1976)

The design of compression surfaces for high supersonic speeds using conical flow fields /
by: Jones, John Glynn
Published: (1968)

Measurements of the direct pitching-moment derivatives for two-dimensional flow at subsonic and supersonic speeds and for a wing of aspect ratio 4 at subsonic speeds /
by: Bratt, J. B.
Published: (1962)

Body freedom flutter of ground-launched rocket models at supersonic and high subsonic speeds /
by: Gaukroger, D. R. (Donald Richard)
Published: (1961)

Inlets for supersonic missiles /
by: Mahoney, John J.
Published: (1990)

Co-ordinated experimental and theoretical research on the oscillatory airforces for selected planforms at subsonic and supersonic speeds /
by: Woodcock, David Leon, 1922-
Published: (1969)

Boundary-layer bleed system study for a full-scale, mixed-compression inlet with 45 percent internal contraction /
by: Shaw, Robert J. (Robert Joseph), 1946-, et al.
Published: (1976)

The hemispherical, differential pressure yawmeter at supersonic speed /
by: Beecham, L. J.
Published: (1961)

Measurement of the internal drag of air breathing installations on slender wing-body combinations at supersonic speeds /
by: Britton, J. W.
Published: (1967)

Boundary layer bleed drag at supersonic speeds /
by: Goldsmith, E. L.
Published: (1968)

Tests on an engine installation for a slender gothic wing at M-1.82 /
by: Griffiths, R. T.
Published: (1967)

The development of injector units for jet-lift engine simulation on low-speed-tunnel models /
by: Wood, M. N.
Published: (1967)

Intake research facilities manual : final report, May 1985 /
Published: (1985)

Hydraulic design of short intake for deep outlet works /
Published: (1980)

Airframe/propulsion interference.
Published: (1975)

Tests at subsonic and supersonic speeds on a slender cambered wing with fin, underwing engine nacelles and trailing-edge controls /
by: Isaacs, Donald
Published: (1969)

Swirling Flow Problems at Intakes /
Published: (2017)

Intake structure operation study : Elk Creek Dam, Oregon /
by: Howington, Stacy E.
Published: (1990)

Turbulent wall jets with and without an external stream /
by: Bradshaw, B. A.
Published: (1962)

Real-air effects in propelling nozzles /
by: Ascough, John Cecil
Published: (1968)

Formed suction intake approach appurtenance geometry /
by: Fletcher, Bobby P.