Metric top diameter sawlog tables.

Weight-scaling pine sawlogs in Texas /
by: Bair, William M.
Published: (1965)

Wood identification handbook : commercial woods of the United States /
by: White, Marshall S.
Published: (1980)

Wood identification : a manual for the non-professional /
by: Sharp, John B.
Published: (1990)

Fine hardwoods selectorama : a guide to the selection and use of the popular species.
Published: (1956)

Firewood : a woodcutter's fieldguide to trees in summer and winter /
by: Michaelson, M.
Published: (1978)

The cost of scaling & grading hardwood sawlogs /
by: Church, Thomas W. (Thomas Wright)
Published: (1966)

How lumber price changes affect sawlog values /
by: Martens, David G.
Published: (1967)

Changes in mill run hardwood sawlog lumber grade yields when veneer logs are withdrawn /
by: Woodfin, Richard O.
Published: (1964)

Saga of Sawlog.
by: Krumrey, Kate Warner, 1894-
Published: (1965)

Raise cutting diameters for increased returns /
by: Smith, H. Clay
Published: (1979)

A Table, calculated to shew the contents (in feet and twelfth parts of a foot) of any sled load or cart load of wood, having the length given in feet, and the heighth and width in feet and inches.

Effect of logging wounds on diameter growth of sawlog-size Appalachian hardwood crop trees /
by: Lamson, Neil I., et al.
Published: (1988)

Small-diameter success stories /
by: Livingston, Jean
Published: (2004)

Estimating air drying times of samll-diameter ponderosa pine and Douglas-fir logs /
by: Simpson, William Turner, 1938-
Published: (2003)

Small-diameter success stories II /
by: Livingston, Jean
Published: (2006)

Merchantable sawlog and bole-length equations for the Northeastern United States /
by: Yaussy, Daniel A., et al.
Published: (1991)

Practical lumber computer : a handbook of lumber tables.
Published: (1956)

AUTOSAW simulations of lumber recovery for small-diameter Douglas-fir and Ponderosa pine from southwestern Oregon /
Published: (2003)

A table of boorde and timber measure, more perfect then euer hath beene made : shewing also the roote betweene 4 and 31 from quarter to quarter /
by: Norton, Robert, -1635
Published: (1615)

Hoppus's tables for measuring, or, Practical measuring made easy : by a new set of tables, which shew at sight the solid content of any piece of timber, stone, &c. either square, round, or unequal-sided, and the value at any price per foot cube ... the contents being given in feet, inches, and twelfth parts of an inch : with some very curious observations concerning measuring of timber by several dimensions /
by: Hoppus, E. (Edward), -1739

Wood joist floors : probabilistic analysis of joist stiffness measured at retail lumberyards.
Published: (1982)

Safety of employees and travelers, etc.
Published: (1896)

The carpenters rvle.
by: More, Richard (Carpenter)
Published: (1970)

Box board thicknesses.
Published: (1926)

Derivation of tensile strength ratio by second-order theory /
by: Orosz, Ivan
Published: (1976)

Comparing lumber yields from board-foot and cubically scaled logs /
by: Hallock, Hiram
Published: (1979)

Converting Virginia pine stump diameters to diameters breast high /
by: Church, Thomas W. Jr
Published: (1953)

The inspection and measurement of wood in Washington.
Published: (1882)

Timber merchant's guide : also, a table, whereby, at one view, may be seen the solid and superficial measure of any square or unequal hewed logs or plank, from one to forty-seven inches : also, plates representing the figures of the principal pieces of timber, used in building a seventy-four gun ship of the line, in standing trees /
by: Guillet, Peter
Published: (1823)

Timber merchant's guide : also, a table, whereby, at one view, may be seen the solid and superficial measure of any square or unequal hewed logs or plank, from one to forty-seven inches. Also, plates representing the figures of the principal pieces of timber, used in building a seventy-four gun ship of the line, in standing trees /
by: Guillet, Peter
Published: (1823)

Multi-product weight scaling of southern pine : proceedings /
Published: (1970)

Evaluation of dimension lumber made from dead-tree logs /
by: Lowery, David P.
Published: (1982)

Predicting lumber volume and value of young-growth true firs : users' guide /
by: Ernst, Susan
Published: (1982)

OPTIGRAMI : optimum lumber grade mix program for hardwood dimension parts /
by: Martens, David G., et al.
Published: (1985)

Cost and productivity of new technology for harvesting and in-woods processing small-diameter trees /
by: Lambert, Michael B.
Published: (1990)

Computerized technique for recording board defect data /
by: Anderson, R. Bruce
Published: (1993)