The bending under normal loading of plates tapered in planform /

Calculation of stability derivatives for tapered wings of hexagonal planform oscillating in a supersonic stream /
by: Lehrian, Doris E.
Published: (1963)

Pressure distributions and flow patterns on some conical shapes with sharp edges and symmetrical cross-sections at M = 4.0 /
by: Squire, Leonard Charles
Published: (1963)

Partial loading on orthotropic plates /
by: Elliott, G.
Published: (1978)

Measurement of the pitching-moment derivatives for rigid tapered wings of hexagonal planform oscillating in supersonic flow /
by: Woodgate, L.
Published: (1962)

Thin plate design for in-plane loading /
by: Williams, D. G. (Donald G.)
Published: (1979)

Plate bending analysis with boundary elements /
Published: (1998)

Optimum reinforcement around a circular hole in a flat sheet under uniaxial tension /
by: Mansfield, Eric Harold, 1923-
Published: (1973)

A review of effective plating to be used in the analysis of stiffened plating in bending and compression.
by: Faulkner, Douglas
Published: (1973)

The bending and stretching of plates.
by: Mansfield, Eric Harold, 1923-
Published: (1964)

The bending and stretching of plates /
by: Mansfield, Eric Harold, 1923-
Published: (1989)

Inflated mobile lifting structures: analysis of generator-cord construction for circular planforms /
by: Lester, William George Samuel
Published: (1964)

Stiffened plates : bending, stability, and vibrations /
by: Troitsky, M. S.
Published: (1976)

Stress concentration factors for reinforced rounded-square holes in sheets /
by: Sobey, Albert J.
Published: (1968)

The bending and stretching of plates.
by: Mansfield, Eric Harold, 1923-
Published: (1964)

Charts for buckling and post-buckling analyses of stiffened plates under combined loading /
by: Mansour, Alaa E.
Published: (1976)

Thin plate design for transverse loading /
by: Aalami, B.
Published: (1975)

Fatigue tests of hybrid plate girders under combined bending and shear /
by: Fielding, David J.
Published: (1967)

Local loads in plates and shells /
by: ukasiewicz, Stanisaw, doc. dr. hab. inz
Published: (1979)

Anisotropic plates /
by: Lekhnit͡skiĭ, S. G. (Sergeĭ Georgievich)
Published: (1968)

Additional fatigue tests of hybrid plate girders under pure bending movement /
by: Kurobane, Y.
Published: (1967)

A mathematical analysis of bending of plates with transverse shear deformation.
by: Constanda, C. (Christian)
Published: (1990)

Part I: The flow pattern on a tapered swept-back wing at Mach numbers between 0.6 and 1.6. Part II: Experiments with a tapered swept-back wing of Warren 12 planform at Mach numbers between 0.6 and 1.6 /
by: Hall, Ian Murray
Published: (1962)

Estimating fatigue crack initiation and propagation lives in notched plates under variable loading histories /
by: Socie, Darrell
Published: (1977)

Two-dimensional normal fences on a flat plate /
by: Barnes, C. S.
Published: (1966)

Wind tunnel tests on cambered wings of mild gothic planform : parts I and II /
by: Butterworth, P. J.
Published: (1978)

Advances in the theory of plates and shells /
Published: (1990)

Analysis and design of plated structures /
Published: (2006)

Basic principles of plates and slabs : for safer and more cost effective structures /
by: Lowe, P. G. (Peter Gerald)
Published: (2005)

Measurements of the direct pitching-moment derivatives for four wing planforms at transonic speeds /
by: Bratt, J. B.
Published: (1966)

Plates and shells /
Published: (1999)

Nonlinear analysis of plates /
by: Chia, Chuen-Yuan
Published: (1980)

Vibration of plates /
by: Leissa, Arthur W., 1931-

Plate formulas.
by: Griffel, William
Published: (1968)

Vibration of plates /
by: Chakraverty, Snehashish
Published: (2009)

Oscillatory aerodynamic forces in linearised supersonic flow for arbitrary frequencies, planforms and mach numbers /
by: Allen, D. J.
Published: (1965)

An experimental investigation of the effect of planform shape on the subsonic longitudinal stability characteristics of slender wings /
by: Kirby, D. A. (Donald Allen), 1926-
Published: (1969)