The effect of a cylindrical shroud on the performance of a stationary convergent nozzle /

An experiment on aerodynamic nozzles at M = 2 /
by: Reid, J.
Published: (1964)

The effect of a central jet on the base pressure of a cylindrical after-body in a supersonic stream /
by: Reid, J.
Published: (1961)

Real-air effects in propelling nozzles /
by: Ascough, John Cecil
Published: (1968)

Design of a supersonic nozzle /
by: McCabe, A.
Published: (1967)

A theoretical study of annular supersonic nozzles /
by: Lord, W. T.
Published: (1961)

Boundary-layer separation in supersonic propelling nozzles /
by: Herbert, M. V.
Published: (1966)

The transonic flow in the throat region of a two-dimensional nozzle with walls of arbitrary smooth profile /
by: Moore, A. W. (Alan William)
Published: (1967)

Transonic flow in the throat region of an annular nozzle with an arbitrary smooth profile /
by: Moore, A. W. (Alan William)
Published: (1967)

The performance of a centrebody propelling nozzle with a parallel shroud in external flow.
Published: (1966)

The design-point performance of model internal-expansion propelling nozzles with area ratios up to 4 /
by: Herbert, M. V.
Published: (1967)

The performance of a conical convergent-divergent nozzle with area ratio 2.9 in external flow /
by: Golesworthy, G. T.
Published: (1967)

On axi-symmetrical gas jets, with application to rocket jet flow fields at high altitudes /
by: Lord, W. T.
Published: (1962)

Effects of sidewall geometry on the installed performance of nonaxisymmetric convergent-divergent exhaust nozzles /
by: Yetter, Jeffery A., et al.
Published: (1980)

The performance of conical convergent-divergent nozzles of area ratios 2.44 and 2.14 in external flow /
by: Golesworthy, G. T.
Published: (1967)

Measurements in a three-dimensional turbulent boundary layer in supersonic flow /
by: Hall, Michael George
Published: (1968)

Effects of nozzle exit geometry and pressure ratio on plume shape for nozzles exhausting into quiescent air /
by: Scallion, W. I.
Published: (1991)

Analysis and design of optimized truncated scarfed nozzles subject to external flow effects /
by: Shyne, Rickey J.
Published: (1990)

Characteristics of sewage-sprinkler nozzles /
by: Wiley, Ralph Benjamin
Published: (1925)

Cracking in pressurizer safety and relief nozzles and in surge line nozzle.
Published: (2004)

Coefficients of discharge of sewage-sprinkler nozzles /
by: Greve, Frederick William, 1885-
Published: (1919)

A performance comparison of two small rocket nozzles /
by: Arrington, Lynn A., et al.
Published: (1996)

Gas flow in nozzles /
by: Pirumov, Ul
Published: (1986)

Research on flow nozzles /
Published: (1948)

Investigation of convergent-divergent nozzles applicable to reduced-power supersonic cruise aircraft /
by: Berrier, Bobby L., et al.
Published: (1980)

Methodology for three dimensional nozzle design /
by: Ferri, Aldo A., et al.
Published: (1974)

Impingement characteristics of a combustion nozzle /
by: Dietz, Erik Carl, 1968-
Published: (1992)

The development of injector units for jet-lift engine simulation on low-speed-tunnel models /
by: Wood, M. N.
Published: (1967)

Internal thrust and pumping performance of an auxiliary inlet ejector nozzle with clamshell thrust reverser /
by: Mansour, Ali H., et al.
Published: (1969)

Exhaust nozzle plume effects on sonic boom test results for isolated nozzles /
by: Castner, Raymond S.
Published: (2011)

Leakage found on bottom-mounted instrumentation nozzles.
Published: (2003)

The effect of external flow on an internal-expansion propelling nozzle incorporating ventilation by ambient air /
by: Herbert, M. V.
Published: (1966)

Decomposing solid micropropulsion nozzle performance issues /
by: Reed, Brian D.
Published: (2003)

The optimization of nozzle area ration for rockets operating in a vacuum /
by: Goldsmith, Martin, 1929-
Published: (1956)

Aerodynamic performance of flared fan nozzles used as inlets /
by: Dietrich, Donald A., et al.
Published: (1976)

Radiation cooling of thrust nozzles /
by: Bernard, J. J.
Published: (1975)

BWR feedwater nozzle and control rod drive return line nozzle cracking (NUREG-0619).
Published: (1981)