Bolts, nuts & screws ; a collection of practical discussions on engineering /

Recommendations and suggestions of Bureau of Standards regarding standards for bolt heads, nuts, and screw heads.
Published: (1922)

Amendment to supplementary code of fair competition for the machine screw nut manufacturing industry : (a division of the fabricated metal products manufacturing and metal finishing and metal coating industry) as approved on February 27, 1935 /
Published: (1935)

Supplementary code of fair competition for the machine screw nut manufacturing industry (a division of the fabricated metal products manufacturing and metal finishing and metal coating industry) as approved on May 5, 1934.
Published: (1934)

New-York Screw Bolt Mills.
Published: (1849)

Turn-of-the-nut tightening of anchor bolts /
by: Richards, Jason Halbert, 1979-
Published: (2004)

Bolted connection strength and bolt hold size /
by: Wilkinson, Thomas Lee
Published: (1993)

A laboratory method of measuring slip in bolted connections /
by: Moss, D. S.
Published: (1968)

Bolted-connection design /
by: Soltis, Lawrence A.
Published: (1987)

Fatigue of anchor bolts /
by: Frank, Karl H.
Published: (1978)

Comparative evaluation of conventional and resin bolting systems /
by: Karabin, George J., et al.
Published: (1976)

Development length for anchor bolts /
by: Breen, J. E. (John Edward), 1932-
Published: (1964)

Import relief for the domestic industrial metal fastener industry : hearings before the Subcommittee on Trade of the Committee on Ways and Means, House of Representatives, Ninety-fifth Congress, second session ... February 27, March 7, 1978.
Published: (1978)

Square, hex, heavy hex, and askew head bolts and hex, heavy hex, hex flange, lobed head, and lag screws (inch series) /
Published: (2013)

Tightening of high strength metric bolts /
by: Gilroy, Michael J.
Published: (1997)

Axial tension fatigue strength of anchor bolts /
by: Fischer, Franklin L.
Published: (1977)

The design and construction of a strain-gaged resin bolt for the measurement of in-situ axial loads /
by: Sawyer, Stephen Gerard, et al.
Published: (1976)

A guide to the selection of high-strength anchor bolt materials /
by: Hasselwander, Gerard B.
Published: (1974)

Strength and behavior of anchor bolts embedded near edges of concrete piers /
by: Hasselwander, Gerard B.
Published: (1977)

Failure of steam generator support bolting.
Published: (1980)

The mechanics of threaded fasteners and bolted joints for engineering and design /
by: Fukuoka, Toshimichi
Published: (2022)

Handbook of bolts and bolted joints /
Published: (2025)

Stress corrosion cracking of reactor coolant pump bolts.
Published: (1990)

Analysis of bolted joints-1999 : presented at the 1999 ASME Pressure Vessels and Piping Conference : Boston, Massachusetts, August 1-5, 1999 /
Published: (1999)

Analysis of bolted joints, 2000 : presented at the 2000 ASME Pressure Vessels and Piping Conference, Seattle, Washington, July 23-27, 2000 /
Published: (2000)

Field verification of load transfer mechanics of fully grouted roof bolts /
by: Signer, S. P. (Stephen P.)
Published: (1990)

Tightening procedures for large-diameter anchor bolts /
Published: (1997)

Plow bolts.
Published: (1925)

Counterfeit bolts and fasteners : hearing before the Subcommittee on Science, Research, and Technology of the Committee on Science, Space, and Technology, U.S. House of Representatives, One Hundred First Congress, first session, April 5, 1989.
Published: (1989)

Bent anchor bolts in boiling water reactor torus supports.
Published: (1989)

Handbook of bolts and bolted joints /
Published: (1998)

Handbook of machining and metalworking calculations /
by: Walsh, Ronald A.
Published: (2001)

Cracking of reactor vessel internal baffle former bolts in foreign plants.
Published: (1998)

Failure of packing nuts on one-Inch uranium hexafluoride cylinder valves.
Published: (1989)

Minimum edge distance for expansion anchor bolts.
Published: (1988)

Proposed code of fair competition for the bolt, nut and rivet industry as submitted on August 24, 1933.
Published: (1933)

Hilti concrete expansion anchor bolts.
Published: (1986)