The structural and mechanical properties of a Cu₆₀Zr₄₀(at. %) alloy processed by High-Velocity-Injection (HVI) /

Rapidly solidified alloys : processes, structures, properties, applications /
Published: (1993)

Numerical simulation of solidification of a copper-base alloy casting-flanged barrel shape : report of research project /
Published: (1972)

Rapidly solidified crystalline alloys : proceedings of a TMS-AIME Northeast Regional Meeting sponsored by the Metallurgical Society New Jersey Chapter and by the Materials Research Society, held at Morristown, New Jersey, May 1-3, 1985 /
Published: (1985)

Microstructures and mechanical responses of powder metallurgy noncombustive magnesium extruded alloy by rapid solidification process in mass production /
by: Kondoh, Katsuyoshi
Published: (2010)

Elevated-temperature properties of coppers and copperbase alloys /
by: Upthegrove, Clair, 1884-
Published: (1956)

Rapidly solidified alloys and their mechanical and magnetic properties : symposium held December 2-4, 1985, Boston, Massachusetts, USA /
Published: (1986)

Science and technology of rapidly quenched alloys : symposium held December 1-3, 1986, Boston, Massachusetts, U.S.A. /
Published: (1987)

Copper and copper base alloys; the physical and mechanical properties of copper and its commercial alloys in wrought form,
by: Wilkins, Richard Alfred, 1896-, et al.
Published: (1943)

Deformation mechanisms, texture, and anisotropy in zirconium and Zircaloy /
by: Tenckhoff, Erich
Published: (1988)

Copper and its alloys /
by: West, E. G. (Edward George), 1909-
Published: (1982)

Fusion welding and brazing of copper and copper alloys /
by: Dawson, R. J. C.
Published: (1973)

The mechanical properties of copper-beryllium alloy strip /
by: Gohn, G. R. (George Rice), 1904-
Published: (1964)

Copper as an alloying element in steel and cast iron /
by: Lorig, Clarence Herman, 1900-
Published: (1948)

Copper and its alloys in engineering and technology.
Published: (1954)

A. S. T. M. standards on copper and copper alloys.

The alloys of iron and copper /
by: Gregg, James Lawrence, 1899-
Published: (1934)

Copper-base alloys foundry practice.
Published: (1965)

Copper and copper alloys. : A series of lectures on copper and copper alloys presented to members of the ASM during the Twenty-ninth National Metal Congress and Exposition, Chicago, October 18 to 24, 1947.
by: Ellis, Owen William, 1888-
Published: (1948)

The effect of solidification time and section size on the mechanical properties and microstructure of high carbon ferrous alloys /
by: Parks, T. W.
Published: (1968)

Rapidly solidified powder aluminum alloys : a symposium /
Published: (1986)

The selection and use of copper-rich alloys /
by: West, E. G. (Edward George), 1909-
Published: (1979)

Copper-base alloys foundry practices.
Published: (1952)

Precipitation strengthened high strength, high conductivity Cu-Cr-Nb alloys produced by chill block melt spinning /
by: Ellis, David L.
Published: (1989)

Modern methods of analysis of copper and its alloys.
by: Dozinel, Charles M.
Published: (1963)

Copper, brass, and bronze castings ; their structures, properties, and applications /
by: Flinn, Richard Alfred, 1929-
Published: (1961)

Protection of advanced copper alloys with lean Cu-Cr coatings /
by: Thomas-Ogbuji, L.
Published: (2003)

Surface reactivity of strongly interacting alloys and its influence on their catalytic properties /
by: Owens, Michael Shawn, 1959-
Published: (1988)

Understanding copper alloys : the manufacture and use of copper and copper alloy sheet and strip /
Published: (1980)

Structure and properties of a rapidly solidified dispersion strengthened aluminum-iron-vanadium-silicon alloy /
by: Little, Stafford Dean, 1967-
Published: (1991)

Rapidly solidified titanium alloys by melt overflow /
Published: (1989)

Rapidly solidified titanium alloys by melt overflow /
Published: (1989)

Brasses and other copper-zinc alloys.
Published: (1954)

Mechanisms of diffusional phase transformations in metals and alloys /
by: Aaronson, Hubert I.
Published: (2010)

Copper data.
Published: (1954)

Riser design for copper alloys of narrow and extended freezing range /
Published: (1966)

Advanced high-temperature alloys : processing and propertas printed] by Samuel M. Allen, Regis M. Pelloux, Robert Widmer ; co-sponsored by Department of Materials Science and Engineering, Massachusetts Institute of Technology and Boston Chapter, American Society for Metals.
Published: (1986)