Characterization of sampling cyclones /

Cyclones in industry ; a collection of papers on the principles and utilization of industrial cyclones, originally presented at the two symposia on this subject, organised in 1953 and 1958 /
Published: (1961)

Pressure drop in cyclone separators commonly used in the agricultural processing industry /
by: Guzman, Francisco Alejandro, 1952-
Published: (1984)

Gas cyclones and swirl tubes : principles, design and operation /
by: Hoffmann, Alex C.
Published: (2002)

Magnetic tools and appliances in engineering production, dealing with magnetic chucks, clutches, brakes, lifting magnets, magnetic separators, and crack detectors /
by: Edward, Molloy
Published: (1942)

Parametric study of air sampling cyclones /
by: Moore, Murray Edward, 1962-
Published: (1991)

Gas cyclones and swirl tubes : principles, design and operation /
by: Hoffmann, Alex C.
Published: (2002)

Determination of the thermodynamic performance of a bottom outlet cyclone steam-water separator for geothermal use /
by: Chappell, Mark Andrew
Published: (1979)

Cyclone performance for the separation of solids from supercritical water oxidation effluents /
by: Laspidou, Chrysti S., 1969-
Published: (1995)

Evaluation of an involute skimmer design for use with small-diameter cyclones.
Published: (1978)

The recovery of crude oil spilled on a ground water aquifer /
by: Malter, Paul Lawrence, 1952-
Published: (1983)

A characterization of a dual chambered, two phase separator /
by: Klein, Casey
Published: (2012)

Evaluation of fuel rod characterization for transient fuel modeling /
by: Bechler, Eric Wayne, 1964-
Published: (1989)

Review of published experimental calibrations performed on the 10 millimeter nylon cyclone /
by: Tomb, Thomas F., et al.
Published: (1976)

Small-sample reactivity measurements in nuclear reactors /
by: Foell, Wesley K.
Published: (1972)

Relationship between classifier performance and distributional complexity for small samples /
by: Attoor, Sanju Nair, 1977-
Published: (2003)

A shrouded probe aerosol sampling cyclone /
by: Little, Stewart Craig, 1966-
Published: (1992)

Evaluation of five-layer sample bags for containment of methanol vapor /
by: Schaller, Janet Elizabeth, 1958-
Published: (1984)

The tangential velocity profile and momentum transfer within a microgravity vortex separator /
by: Ellis, Michael Clay
Published: (2010)

Gas cyclones and swirl tubes : principles, design, and operation /
by: Hoffmann, Alex C.
Published: (2007)

OHMSETT evaluation tests : three oil skimmers and a water jet herder /
Published: (1980)

Evaluation of REO model BT 300 C-D blasting machine tester /
by: Scott, John H.
Published: (1981)

Adolescent separation anxiety /
by: Hansburg, Henry G., 1910-
Published: (1980)

The hydrocyclone /
by: Bradley, Douglas
Published: (1965)

Flowrate effects upon adsorption in a charcoal sampling tube /
by: Bolton, Fredric Newell, 1952-
Published: (1984)

Gas-liquid and liquid-liquid separators /
by: Stewart, Maurice
Published: (2009)

Development and characterization of a porous silicon membrane for gas separations /
by: Beckett, Paul Clay, 1959-
Published: (1991)

Determinaton of the relationship of free volume to mechanical behavior for an epoxy system subjected to various aging histories /
by: Ring, Darryl Steven
Published: (1979)

A 113 L/min ambient aerosol sampler for collection of thoracic and respirable fractions /
by: Rue, Clayton Matthew, 1957-
Published: (1981)

Modal testing and analysis : presented at the 1987 ASME design technology conferences - 11th biennial Conference on Mechanical Vibration and Noise, Boston, Massachusetts, September 27 - 30, 1987 /
Published: (1987)

Transportation manual, dynamic inclined plane oil skimmer : DIP 3001.
Published: (1979)

Solid/liquid separation : equipment selection and process design /
by: Tarleton, E. S.
Published: (2007)

Gas-liquid and liquid-liquid separators /
by: Stewart, Maurice
Published: (2009)

Simulation of heat pipe rapid transient performance using a multi-nodal implicit finite difference scheme /
by: Peery, James Samuel, 1962-
Published: (1986)

The mechanical testing of metals and alloys ; the theory and practice of standardized mechanical testing.
by: Foster, P. Field (Percy Field)
Published: (1948)

The mechanical testing of metals and alloys ; the theory and practice of standardized mechanical testing /
by: Foster, P. Field (Percy Field)
Published: (1942)

Guide to rubber and plastics test equipment /
Published: (1989)