Mechanical- and thermal-buckling behavior of rectangular plates with different central cutouts /

Buckling and postbuckling behavior of square compression-loaded graphite-epoxy plates with circular cutouts /
by: Nemeth, Michael P.
Published: (1990)

Modal interaction in postbuckled plates : theory /
by: Thurston, Gaylen A.
Published: (1989)

Thermal and mechanical buckling analysis of hypersonic aircraft hat-stiffened panels with varying face sheet geometry and fiber orientation /
by: Ko, William L.
Published: (1996)

Postbuckling delamination of a stiffened composite panel using finite element methods /
by: Natsiavas, S., et al.
Published: (1987)

Stacking-sequence optimization for buckling of laminated plates by integer programming /
by: Haftka, Raphael T.
Published: (1991)

Buckling and vibration of fiber reinforced composite plates with nanofiber reinforced matrices /
by: Chamis, C. C. (Christos C.)
Published: (2011)

Buckling behavior of long anisotropic plates subjected to combined loads /
by: Nemeth, Michael P.
Published: (1996)

Development of curved-plate elements for the exact buckling analysis of composite plate assemblies including transverse-shear effects /
by: McGowan, David M.
Published: (1999)

Progressive failure studies of composite panels with and without cutouts /
Published: (2001)

Predictions of thermal buckling strengths of hypersonic aircraft sandwich panels using minimum potential energy and finite element methods /
by: Ko, William L.
Published: (1995)

Effects of thickness and ply orientation on buckling of laminated plates /
by: Jegley, Dawn C.
Published: (1986)

Innovative design of composite structures : the use of curvilinear fiber format in composite structure design /
by: Hyer, M. W.
Published: (1990)

The effect of a small initial curvature on the free vibration of clamped, rectangular plates : interim report /
by: Adeniji-Fashola, A. A.
Published: (1986)

Postbuckling response of long thick plates loaded in compression including higher order transverse shearing effects /
by: Stein, Manuel
Published: (1990)

Observation of the initiation and progression of damage in compressively loaded composite plates containing a cutout /
by: Waas, Anthony M.
Published: (1986)

Observation of the initiation and progression of damage in compressively loaded composite plates containing a cutout /
by: Waas, Anthony M.
Published: (1986)

Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading : a semi-annual status report submitted to NASA-Lewis Research Center, Cleveland, Ohio /
by: Simitses, George J., 1932-
Published: (1987)

Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading : a semi-annual status report submitted to NASA-Lewis Research Center, Cleveland, Ohio /
by: Simitses, George J., 1932-
Published: (1987)

Design, optimization and evaluation of integrally stiffened Al 7050 panel with curved stiffeners /
Published: (2011)

Probabilistic assessment of National Wind Tunnel /
by: Shah, A. R., et al.
Published: (1996)

PIV and rotational raman-based temperature measurements for CFD validation of a perforated plate cooling flow : part 1 /
by: Wernet, Mark P.
Published: (2020)

An integrating matrix formulation for buckling of rotating beams including the effects of concentrated masses /
by: Lakin, William D.
Published: (1989)

An integrating matrix formulation for buckling of rotating beams including the effects of concentrated masses /
by: Lakin, William D.
Published: (1989)

Buckling design and analysis of a payload fairing 1/6th cylindrical arc-segment panel /
by: Kosareo, Daniel N., et al.
Published: (2013)

Design and analysis of buckling-critical large-scale sandwich composite cylindrical test articles /
by: Przekop, Adam
Published: (2020)

Buckling test results from the 8-foot-diameter orthogrid-stiffened cylinder test article TA01 : test dates: 19-21 November 2008 /
by: Hilburger, Mark W. (Mark William), et al.
Published: (2015)

High-frequency techniques for RCS prediction of plate geometries : semiannual progress report, August 1, 1990 - January 31, 1991 /
by: Balanis, Constantine A., 1938-
Published: (1991)

Plate bending analysis with boundary elements /
Published: (1998)

Micromechanics analysis of space simulated thermal deformations and stresses in continuous fiber reinforced composites /
by: Bowles, David E.
Published: (1990)

A treatise on equivalent-plate stiffnesses for stiffened laminated-composite plates and plate-like lattices /
by: Nemeth, Michael P.
Published: (2011)

Modeling of composite beams and plates for static and dynamic analysis /
by: Hodges, Dewey H.
Published: (1990)

The use of Lanczos's method to solve the large generalized symmetric definite eigenvalue problem /
by: Jones, Mark T.
Published: (1989)

Design, optimization, and evaluation of A1-2139 compression panel with integral T-stiffeners /
Published: (2012)

On hybrid and mixed finite element methods /
by: Pian, Theodore H. H., 1919-2009
Published: (1981)

The repair and return to flight of solid rocket booster forward skirt serial number 20022 /
by: Malone, T. W.
Published: (2008)

Thermostructural analysis of unconventional wing structures of a Hyper-X hypersonic flight research vehicle for the Mach 7 mission /
by: Ko, William L.
Published: (2001)